Emerson Network Power’s KSI8560 is an advanced mezzanine card for telecommunications applications. It combines a PowerQUICC III MPC8560 controller with up to eight channelized E1/T1 spans in order to process protocols, packets, signaling, and WAN access for
PEM self-clinching cable tie mounts and hooks provide secure attachment points for mounting wires and cables to electronic chassis or enclosures. Model TD cable tie mounts and model TDO hooks can be installed quickly and permanently without screws or adhesives. Their locations and positions are set during the design process to provide optimal layout for wires and cables during final assembly. Both types are RoHS compliant and are available in several sizes for installation in metal sheets from .040"/1.02 mm to .125"/3.18 mm.
STS Inc. announced the availability of its fourth-generation chip (DARR81) for digital wireless audio platforms in the connected home or office. The chip enables simultaneous audio connections of consumer electronics (CE) devices, such as headphones, speakers, home theater systems, flat panel TVs, game consoles, iPod and portable media player docking stations, and PCs for uninterrupted streaming of HD uncompressed wireless audio.
Crystek introduced the Pocket Reference Oscillator (PRO Series), said to be the industry’s first frequency control product to integrate a complete HCMOS crystal clock oscillator in a rugged SMA housing. The oscillator offers frequency stability of ±25 ppm over 0°C to 70°C (operating temperature range rated at -40°C to 85°C; storage -45°C to 90°C). They are available off-the-shelf in frequencies from 4 MHz to 125 MHz
The SEI-USB from US Digital is an interface module that connects the company's SEI compatible devices to a standard USB 1.1 / 2.0 port. It connects up to 15 addressable SEI devices using a single 6-wire telephone-type cable up to 1000 feet long. It uses two RS-485-like differential pairs, one for “busy” flow control, and the other for bi-directional serial data
A multipurpose miniature wave system for soldering and desoldering is now available from Manncorp. The System 120 bench-top device is designed for single-point or single-edge soldering and removal of ICs such as DIPs, QFPs, PGAs, connectors, and odd forms. It is useful for short runs requiring selective soldering of single components and can be adjusted to 399ºC for lead-free or tin/lead processing.
The HVI 2K-750/24 high input voltage DC/DC converter from Absopulse uses field proven design topology to generate 2kW output power. It accepts a 750V DC input voltage (525V to 975V DC range), which is the traction voltage typically required for mass transit vehicles such as trams, metros and light rail, as well as mining locomotives. The standard unit delivers
ERNI Electronics expanded its 1.27 mm SMC connector family with a board-to-board right-angle SMC connector and integrated locking system. The locking system can withstand normal vibration and shock loads, yet still disconnect without using tools. Female (type Q) and male (type B) connectors are available with surface-mount termination and plastic housings constructed of
ChipX announced the introduction of Hybrid ASIC, the implementation of a structured ASIC as IP on a Standard Cell device. This development approach is said to allow for rapid and economical product line development and save companies recurring engineering (NRE) and tooling costs. According to the company, turnaround time for logic changes can be
Automation Products Group, Inc. introduced the LPU-2428 Loop Powered Ultrasonic Level Sensors with microprocessor control to internally perform volume, flow, and totalization calculations. These IP65 rated sensors provide a 1 foot to 25 foot (0.3 m to 7.62 m) detection range. They are designed for liquid flow-rate and volume measurement applications.
Components Corp. announced the freestanding BC-501 battery contact series. The low profile, small footprint contacts can be placed anywhere on a circuit board and eliminate the need for a plastic housing. They have a wireform design that helps ensure reliable and high spring force. BC-510 2A contacts are provided on 8 mm wide, 4 mm pitch, conductive polycarbonate tape that meets ANSI/EIA-481 standards
Micrel's SY88343HL and SY88289HL high-sensitivity, low-power CML limiting post amplifiers are designed with twice the signal gain of the company's previously announced SY88343DL and SY88289CL. These products are targeted at applications using low-cost transimpedance amplifiers and/or low gain PIN diodes which occur in a variety of data and telecom markets
Intersil Corporation introduced the ISL3259E RS-485/RS-422 transceiver, a next-generation interface IC that combines a 100 Mbps data transmission rate with a low 2.6 mA supply current and 15 kV IEC61000-4-2 ESD (electro-static discharge) protection. The IC allows for the elimination of external protection components and saves on total costs. This device’s ESD level is rated at 15 kV air gap and 8 kV contact discharge to IEC61000-4-2 on the RS-485/RS-422 bus pins and 9kV HBM on all of the other pins.
Linear Technology expanded its RS-422/RS-485 transceiver product family with an "H-grade" option designed for high temperature applications. LTC285xH versions feature an extended operating temperature of -40°C to 125°C, as well as the characteristics traditionally required for these applications. The new temperature grade is intended to ensure reliable data transmission in harsh environmental conditions
Advanced Analogic Technologies Incorporated announced the AAT3663, the first in a family of 1A linear battery charger ICs capable of charging up to two Li-ion cells in series. Designed to operate from either an AC adapter or a USB port, this device features the company’s Digital Thermal Loop charge reduction circuit which monitors the internal die temperature and gradually steps down the charge current to avoid thermal shutdown.