Suited for today’s power-hungry, battery-powered electronics including mobile phones, PDAs, MP3 players, digital cameras and handheld instruments, Micrel’s MIC5331/32/33 dual channel micro-power LDO regulator consumes a maximum of 40µA with both outputs enabled.
Curtiss-Wright Controls announced its CHAMP-AV6 VPX DSP engine which delivers a sustained intercard data rate of 8.68 GB/s, a 16× improvement over the quad PowerPC-VME-based DSP engine. The device uses the standard IPC communications library, highlighting the inherently low overhead of both SRIO and the IPC library, which together were able to deliver approximately 92 percent of the “wire speed” of the SRIO links. Features include four Freescale 8641 single/dual-core processors, backplane connectors capable of handling signaling speeds in excess of 6.25 Gbits/sec, and 1.0" pitch option defined by the VPX-REDI standard (VITA 48) that enables the use of several enhanced mechanical design elements to achieve higher power dissipation.
Connect One announced the IIEVB-PIC-2128-110/220 reference design and a corresponding evaluation board that bring together the 16-bit MCU for application control and the CO2128 iChip for secure, reliable TCP/IP connectivity to LAN and GPRS networks. Using the evaluation board, developers can quickly and easily develop an IP-enabled embedded system where the application resides on the PIC24 MCU and the networking and security are provided by the CO2128 iChip.
Enabling switching PCIe 2.0 data rates at 5.0Gbps and operating at 1.8V, 2.5V, or 3.3V, the MAX4888A and MAX4889A dual, passive PCIe switches allow multiple PCIe graphics cards to be used in PCs and servers. The MAX4888A (dual single-pole/double-throw- 2 × SPDT) is suited for switching two Rx or Tx equivalent lanes while the MAX4889A quad switch offers twice the capacity, handling four equivalent lanes of PCIe data with the equivalent half lanes used as one source and two destinations or two sources and one destination to minimize the effects of crosstalk. Both feature a single digital-control input (SEL) to switch signal paths designed to minimize power and skew and offer a zero delay switch. Specifications include operation from a single +3.0V to +3.6V power supply and down to +1.65V over the extended -40°C to +85°C temperature range.
Encapsulated in a heat- and UV-resistant silicone compound, Avago’s one-Watt ASMT-MA00 amber and ASMT-MR00 red LEDs accept a drive current as high as 350mA to deliver an output of up to 42lm. Suitable for architectural and decorative lighting applications, the 3.3-mm high RoHS-compliant devices include features such as a 120° viewing angle, an exposed pad for increased heat transfer, and an ESD withstand of greater than
Based on the high-performance IntelR Atom processor Z500 series, the RadiSys Procelerant Z500 addresses handheld and mobile applications with features such as 1GB memory, a MicroSD socket, and an extended input voltage range for battery power. Compatible with the Type 2 COM Express pin-out, the 85 mm × 70 mm module can pair with the RadiSys heatspreader/mechanical adapter to provide drop-in replacement for existing Basic Form Factor designs.
With the precharging resistors for damping inrush currents integrated in the housing, the B44066S*J230/N230 Series of EPCOS capacitor contractors can create a 100-kvar circuit with a single device for PFC systems with and without reactors. The contactors extend the service life of the capacitor and PFC system via optimized switching behaviour, and are also equipped with an auxiliary contact. Available from stock at a cost of $290 each.
The Cannon PHD SuperLC connector from ITT Interconnect Solutions meets or exceeds Lucent 640-252-053 and Telcordia GR-326 requirements, making it suitable for military/aerospace, telecom service, and industrial data communications applications. The connector features a tunable optical cartridge that functions as a standalone optical element separate from the connector housing
Measuring 1.0 mm × 0.5 mm × 0.25 mm, Avago Technologies’ VMMK-1218 and -1225 field effect transistors (FETs) occupy less than 5 percent the volume of a standard SOT-343 package. The VMMK-1225 supports 0.5 GHz to 26.5 GHz frequency ranges with a noise figure of less than 0.95 dB and 12 dB available gain under 50 ohms conditions at 12 GHz. The FET also offers 23 dBm output third-order intercept and 8 dBm output power.
Provided in a 6-pin model as well as 5-pin and 7-pin versions compliant with PICMG EXP.0 CompactPCI Express, the Universal Power Module family of multipoint connectors from ERNI Electronics have a current carrying capacity of 18A per contact at 20°C. Hot-swap capable, the pressfit angled male devices can supply power to daughter cards in conjunction with 2 mm ERmet connectors
Premo EMC's EMI FVDT filters are intended for frequency investors destined to wind turbine generator. These filters present high extenuations in 150 kHz up to 30 MHz frequencies according to EMC 2004/108/CE Directive and specific norm product EN61800-3:2004. The product range destined to wind turbine generator include
Able to power remote wireless LAN access points, VoIP phones, video cameras, RFID readers, and other IP terminals over the existing network cable infrastructure, GlobTek's GT-91093-HPOE Series Power over Ethernet (PoE) Midspans can be configured to 15.4W of power per port over two pairs in compliance with IEEE 802.3af standard or to 38.5W over four pairs of the CAT5e cable.
Ethertronics introduced two miniaturized ceramic antennas: a GPS/Bluetooth version and a GPS antenna, which is said to provide high efficiency while minimizing ground clearance and component “keep out” areas. Designed to address the challenges associated with incorporating multiple RF-functions into mobile devices, both antennas include
Using 15-bit vertical resolution, Agilent Technologies’ N6030A (PXI) and N8241A (LXI) PXI-and LXI-based arbitrary waveform generators (AWGs) can create simultaneous wide-bandwidth and high-resolution signals for electronic testing of radar, satellite, telecom or military communication equipment. Offers a spurious-free dynamic range of less than -65 dBc per channel, DC to 500 MHz, with a noise floor of less than -150 dBc/Hz. When combined with the Agilent PSG vector signal generator wideband I/Q upconverter, the AWGs can achieve modulation bandwidths as high as 1 GHz at up to 44 GHz for IF and RF subsystem testing. Each of the four-slot generators’ two channels offer 1.25 GS/s with a signal bandwidth of up to 500 MHz and a standard waveform length of 8 MS per channel, expandable to 16 MS.
Optimized for direct digital synthesis of high-frequency and wideband signals in the first Nyquist zone, the 12-bit, 4.0Gsps MAX19693 wideband DAC from Maxim Integrated Products can synthesize signals in the frequency range from DC to nearly 2GHz. Suitable for applications such as wideband communications, radar waveform and digital signal synthesis, the 11mm2 CSBGA device offers an SFDR of greater than 70dBc below 800MHz, and 62dBc at 1500MHz with a wideband-noise spectral density of -164dBm/Hz.