Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Motherboard Utilizes Quad Processor

November 5, 2008 10:15 am | Comments

Possessing the Intel Q45 Express chipset with Intel I/O controller hub 10 DO, ITOX’s EL330-DR micro-ATX form factor motherboard supports the 45-nm Intel Core 2 Quad processor Q9400 with up to 6 MB of shared L2 cache and up to 1,333 MHz front side bus (FSB). The component protects against software-based attacks, and safeguards the confidentiality and integrity of data stored or created on an embedded system via Intel Trusted Execution Technology (TXT) support. The device integrates

DC/DC Converter Delivers 3.3 VDC

November 5, 2008 9:33 am | Comments

Using 200 LFM airflow, Power-One’s SSQE48T25033 sixteenth-brick DC/DC converter supplies 3.3 VDC at 25 A with 100% of full-rated power available at 55°C and 22 A at 70°C. The 22.9 mm × 33 mm × 9.5 mm devices offer ±3% combined line, load, and temperature regulation; efficiencies of up to 93%, an input range from 36 VDC to 75 VDC, the capability to

Field-Replaceable SMAs Offer Improved VSWR

November 5, 2008 9:02 am | Comments

Rated for maximum dielectric withstanding voltage (DWV) of 1000 V RMS at 60 Hz and sea level, a line of field-replaceable SMAs from San-tron feature VSWR of 1.07:1 from DC to 18 GHz, and 1.25:1 or better through 26.5 GHz. The connector families include models for mating with 0.012-, 0.015-, 0.018-, and 0.020-in center pins. The 50-O SMAs feature passivated 303 stainless-steel bodies

Advertisement

BGS Sensors Exhibit Automatic Crosstalk Protection

November 5, 2008 8:26 am | Comments

Delivering a sensing range of up to 350 mm, Pepperl+Fuchs’ ML7 background suppression (BGS) sensors present automatic crosstalk protection, enabling multiple sensors to be mounted side-by-side without inter-unit interference. The 31 mm × 11 mm × 23 mm devices use LED indicators for provide power and output status, and diagnostic information. The instruments utilize the 4-in-1 output for detecting the connected load and sink or sources as needed. The units suit

Connection System Works in 22 A Apps

November 5, 2008 7:53 am | Comments

Based on the 1.5 mm width ISO blade-type terminal system, Molex’s MX150 cable-sealed 1-by-2 connection system supports low-level signal and power applications up to 22 A. The product offers sealing for SAE wire gauges from 14 AWG to 22 AWG and metric-sized wires, and

Servo Motor Controller Possesses CANopen

November 5, 2008 6:55 am | Comments

Configuring for peer-to-peer master or slave, QuickSilver Controls’ QCI-D2-IG-J1 OEM servo motor controller uses CANopen to share I/O and registers with other CANopen-enabled SilverDust controllers or third-party CANopen devices. The component supports CAN in Automation (CiA) CANopen drives and motion control profile 402 for allowing master devices to

CPU Board Features Accelerated SDRAM

November 5, 2008 6:12 am | Comments

With a clock rate of 733 MHz, and accelerated DDR SDRAM (266 MHz, + 33 percent), the PowerPC-based Rugged Conduction-Cooled CP3210 from Kontron is an updated version of the company's PowerEngineC7. The CP3210 incorporates a thermal sensor for health monitoring and thermal management. The board features onboard user memory of 512 MB

Surge Protector Passes European Test Requirements

November 5, 2008 6:00 am | Comments

Based on thyristor overvoltage protection technology, Bourns’ TISP4310T3BJR-S TISP surge protector meets European ITU-T K.21 testing requirements, which call for 600 Vrms, 600 Ohm, 1 A test for 1 second. The UL-approved component operates in a voltage protection window from 269 VDRM to 310 V(BO) in modems to ensure that the heating effect of

Advertisement

MCUs Integrate LCD Driver

November 5, 2008 5:24 am | Comments

Targeting portable handheld devices, Freescale Semiconductor’s S08LL, RS08LA, and RS08LE 8-bit MCU families incorporate a high-segment on-chip LCD driver. The components have a low-power blinking mode, front- and back-plane reassignment, an internal charge pump, and an internal clock source. The 9S08LL16/8 units present a voltage range from 1.8 V to 3.6 V, CPU speed of 20 MHz, an 8-channel keyboard interrupt, up to 38 GPIOs, up to 18

SBC Incorporates Legacy I/O Interfaces

November 4, 2008 11:23 am | Comments

Targeting 386 or 486 PC/104 users, Adlink Technology’s CoreModule 430 single board computer combines legacy I/O interfaces with on-board video, DDR2 RAM, USB 2.0, and 10/100 Ethernet. On-board I/O consists of a UDMA port, Compact Flash socket, 4 serial ports (2 with RS-422/485 capability), 2 USB 2.0 ports, Intel 10/100 Ethernet, parallel port, PS/2 keyboard/mouse, and

Signal Generator Exhibits Short Frequency- and Level-Setting Times

November 4, 2008 10:47 am | Comments

Integrating AM/FM/fM and pulse modulation, Rohde & Schwarz’s R&S SMC100A 1/2 × 19”, 2 HU signal generator shows frequency- and level-setting times of <5 ms from 9 kHz to 1.1 GHz or 3.2 GHz. The instrument displays a typical single-sideband phase noise of

PoE Midspan Supplies 33.6 W

November 4, 2008 10:08 am | Phihong | Comments

Conforming to IEEE802.3at (PoE Plus) standards, Phihong’s POE36U-1AT single-port PoE midspan delivers up to 33.6 W of power on a single Ethernet port. The 5.51” × 2.55” × 1.42” instrument provides cUL/UL- and CE-approved detection, disconnect, and voltage control, as well as gigabit compatibility, diagnostic LEDs and overvoltage and overcurrent protection. Applications

Solar Panel Connector Meets NEC Requirements

November 4, 2008 9:40 am | Comments

Including a TUV-compliant touch-proof casing, Amphenol Industrial’s Helios H4 4-mm solar panel connector uses a locking design to fulfill NEC 2008 requirements. The product connects multiple solar panels in strings and then to combiner boxes or inverters, and mate with

Advertisement

AMOLED Module Delivers 16M Colors

November 4, 2008 9:04 am | Comments

Utilizing a 24-bit parallel RGB interface, OSD Displays’ OSD0430WQLC-T 4.3” diagonal WVGA active matrix organic LED (AMOLED) module supports up to 16 million colors. The 102.40 mm × 65.60 mm × 1.60 mm device exhibits typical luminance of 200 cd/m², contrast ratio of 10,000:1, and an active area of 95.04 mm × 53.85 mm with 480 × 272 resolution. The display

Linear Actuators Allow Customization

November 4, 2008 8:27 am | Comments

Using a modular design, SKF’s CAT33 electro-mechanical linear actuators enable users to select motors, gears, controls, attachments, and other options to meet application needs. Users can specify standard or special stroke lengths, AC or DC motors, friction clutch gears, cables, front and rear attachments, and accessories such as limit switches and encoders. The right- and left-hand

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading