Product Releases
Photo interrupter intended for optical switches, digital cameras, and printers
May 7, 2013 4:28 pm | Everlight Americas, Inc. | CommentsEverlight Electronics has introduced the latest member of its ITR series of photo interrupters for use in optical switches, digital cameras and printers, the ultra small outline slotted type ITR1205ST11A/TR. A slotted type opto interrupter detects an object when it enters the gap of the slotted switch....
Stamped spring pin achieves 31 gram actuation force per pin
May 7, 2013 4:12 pm | Ironwood Electronics, Inc. | CommentsIronwood Electronics recently introduced a new LGA socket, addressing high performance requirements for 0.5mm pitch devices - CBT-LGA-5000. The contactor is a stamped spring pin with 31 gram actuation force per pin and cycle life of 500,000 insertions.
LED light designed to run 11 hours on a single charge
May 7, 2013 3:58 pm | Larson Electronics Llc | CommentsLarson Electronics Magnalight made public the EPL-RPS-1MLED rechargeable, explosion proof LED light cart. Designed to run 11 hours on a single charge, the Class 1 and Class 2 Division 1 LED light can illuminate a work area of more than 5000 feet.
Polypropylene film caps target DC link and high duty-cycle power applications
May 7, 2013 12:27 pm | Illinois Capacitor | CommentsMDCL Series film capacitors from Illinois Capacitor are available in a range of capacitance values from 50 mF to 1,500 mF with high energy density and voltage ratings up to 1,600 WVDC. Packaged in a tubular metal case, this capacitor well suited for energy management applications, where
Power supply, programmable power, high power, 1000V, testing, photovoltaic inverters
May 7, 2013 11:00 am | Ametek Programmable Power | CommentsAMETEK Programmable Power extended its Sorensen SG Series high-power DC power supply line with the introduction of the new SG 1000V, which can supply up to 1,000V DC for applications such as testing photovoltaic (PV) inverters and electric vehicles. The new 1000V DC model of SG Series power supplies
LED produces 10,000 lumens of bright white light
May 7, 2013 10:40 am | Larson Electronics Llc | CommentsMagnalight.com by Larson Electronics has announced the addition of the EPL-BS-161M-100 explosion proof LED light with aluminum base stand to its line of explosion proof LED lighting equipment. Producing 10,000 lumens of bright white light...
Stainless steel quarter-turn fastener withstands corrosion and heat
May 7, 2013 10:36 am | Southco, Inc. | CommentsSouthco launched the stainless steel DZUS D8 PANEX Quarter-Turn Fastener – the newest line extension to the already successful DZUS D8 PANEX range of quarter-turn fasteners. The stainless steel version delivers the same quick access and fast installation as the standard D8, but enables dependable
Non-magnetic inductor said to be world’s smallest
May 7, 2013 10:11 am | Gowanda | CommentsGowanda Electronics introduced what is asserted to be the world’s smallest non-magnetic molded RF inductor series, SMG1812. The overall size of the new SMG1812 is more than 40 percent smaller than Gowanda’s SMG3013 Series. The SMG1812 was designed specifically for
DC motor features a rated torque of 53 mNm
May 7, 2013 10:09 am | Maxon Precision Motors, Inc. | CommentsThe new – big and powerful – RE 30 EB precious metal brushed motor is a special and rare drive, and for certain applications, it's exactly what's needed. Precious metal brushes are known for ensuring low, constant contact resistance over the entire service life, a characteristic that makes control far easier.
LED panel mount indicators designed for harsh environments
May 7, 2013 9:50 am | CommentsVCC has developed a new series of ruggedized panel mount indicators designed for use in a variety of harsh environments. Featuring built-in LEDs, which are visible both in direct sunlight and at wide angles, VCC’s 22mm CNX 722 Series TuffLED indicators are resistant to shock, vibration, and moisture....
VITA 66.1 optical MT backplane interconnect system promises simplified VPX-architecture
May 6, 2013 12:32 pm | Molex Incorporated | CommentsMolex launched the VITA 66.1 ruggedized optical MT backplane interconnect solution for high-density aerospace, defense and commercial embedded system applications. Fully compliant with the ANSI-ratified 66.1 specification, the compact VITA 66.1 optical MT backplane solution is
SMT limiter diode targets receiver protection applications
May 6, 2013 12:13 pm | Skyworks Solutions, Inc. | CommentsSkyworks Solutions introduced a surface mount limiter diode for receiver protection applications. The CLA4608-085LF is a low capacitance silicon PIN limiter diode designed for high power applications ranging from 10 MHz to over 6 GHz. The maximum resistance at
Ten-Watt, high Isolation DC/DC converter touts UL 60601 approval
May 6, 2013 12:03 pm | Contech, A Division Of Calex | CommentsConTech announced the “TMR” Series of DC/DC converters, which offer up to 10 W of fully regulated output power in a 2’ x 1’ case with an industry standard footprint. The series offers a 2:1 input range with nominal input voltages of
High-temperature air core inductors fit aerospace and military applications
May 6, 2013 11:47 am | Coilcraft Critical Products & Services | CommentsCoilcraft CPS (Critical Products and Services Group) has released its AT392RAS inductors, targeting applications where high temperatures can be encountered. Air-core design and special materials allow operation in ambient temperatures as low as –60°C and up to 240°C. Five inductance values are
PFC controller family adds functionality
May 6, 2013 11:28 am | Tdk Corporation Of America | CommentsTDK Corporation announced two new types of the BR7000 Series of EPCOS power factor controllers. The BR7000-T power factor controller offers 15 transistor outputs instead of 15 relay outputs. It is designed for applications that require fast switching operations and enables
