Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Industry’s first haptic + Bluetooth kit enables easy tactile feedback

September 3, 2014 3:10 pm | Texas Instruments | Comments

Texas Instruments (Dallas, TX) introduced the industry’s first wireless haptic development kit, providing system designers with a fast and convenient way to prototype eccentric rotating mass (ERM) motor and linear resonant actuator (LRA) haptic effects....

TOPICS:

3-axis RF meter suitable for both field and lab use

September 3, 2014 2:45 pm | Comments

Anaheim Scientific (Yorba Linda, CA) releases the second product in the new E-Series of Electromagnetic Meters, the E200 3-Axis RF Field Strength Meter. This meter is designed for measuring and monitoring radio-frequency electromagnetic field strengths....

TOPICS:

4th generation Intel processor provides exceptional computing in new Aitech rugged 6U VME SBC

September 3, 2014 2:14 pm | Aitech | Comments

Aitech Defense Systems (Chatsworth, CA) now offers the C163, a rugged 6U VME SBC based on the 4th generation Intel Core i7 (Haswell) processor family. Based on the latest Intel, 4th generation Core i5 or Core i7 Haswell multicore processors ...

TOPICS:
Advertisement

Wireless power transmitter coils comply with the Qi standard

September 3, 2014 10:39 am | Wurth Electronics Midcom, Inc. | Comments

To increase its offerings in the 12V voltage range of wireless power transmitter coils, Wurth Electronics (Watertown, SD) developed two new coils. Those coils comply with the Qi standard of the Wireless Power Consortium (WPC). The 760308104113 (A13), as a single coil ...

TOPICS:

Sensor development kits accelerate Internet of Things system design

September 3, 2014 9:33 am | Silicon Laboratories Inc. | Comments

Silicon Labs (Austin, TX) introduced two development kits to accelerate the design of environmental and biometric sensing applications for a wide range of Internet of Things (IoT) products. Target applications for the kits include home security systems, smart thermostats ...

TOPICS:

Magnetic single-chip encoder allows for 10-bit angle detection

September 3, 2014 9:24 am | iC-Haus America | Comments

The Ultra-Low Power Single-Chip Hall Encoder iC-TW11 by iC-Haus (Jaffrey, NH) allows for an energy-saving 10-bit angle detection and therefore targets — for example, battery-buffered applications. With a sampling rate of 10 Hz and average current consumption ...

TOPICS:

Wearable sensor hub comes in under 150 microwatts

September 3, 2014 9:15 am | Quicklogic Corporation | Comments

QuickLogic Corporation (Sunnyvale, CA) introduced its new ArcticLink 3 S2 platform, the second CSSP solution in its Sensor Hub roadmap. This next-generation platform delivers double the customer-specific programmable logic capacity, four times the computational performance ...

TOPICS:

Camera flash LED driver delivers up to 1.2A

September 2, 2014 1:42 pm | Micrel | Comments

Micrel, Inc. (San Jose, CA) introduced the MIC2873/MIC2874, an ultra-compact, camera flash LED driver that integrates a 1.2A boost converter and LED driver circuit into a small 9 pin, 1.3mm by 1.3mm chip scale package. Operating from 2.7V to 5.5V and featuring up to 92 percent efficiency ...

TOPICS:
Advertisement

Battery analyzers simplify the testing of mission critical battery backup systems

September 2, 2014 1:21 pm | Fluke Corporation | Comments

The new 500 Series Battery Analyzers from Fluke (Everett, WA) simplify the workflow of testing stationary batteries and battery banks through an intuitive user interface that provides quick, guided test setups ensuring technicians are capturing the correct data....

TOPICS:

Thin film chip resistors address precision resistor requirements of automotive applications

August 28, 2014 4:40 pm | Nic Components | Comments

The NTRA series of automotive-grade thin-film chip resistors from NIC Components addresses precision resistor requirements of automotive applications. The NTRA series products are AEC Q-200 qualified and supported from TS-16494 certified ...

TOPICS:

Dual low-side driver IC designed for SMPS applications

August 28, 2014 4:15 pm | International Rectifier | Comments

International Rectifier (El Segundo, CA) introduced the automotive-qualified AUIRB24427S high-current dual low-side driver IC for Switched Mode Power Supply (SMPS) applications used in Hybrid Electrical Vehicles (HEV), Electric Vehicles (EV) ...

TOPICS:

System-on-a-chip supports vehicle-to-vehicle technology

August 28, 2014 4:02 pm | Renesas | Comments

Renesas Electronics Corporation (Santa Clara, CA) announced the availability of its R-Car V2H, the company’s newest system-on-a-chip (SoC) implementing state-of-the-art image recognition technology to support high-resolution surround viewing in advanced driver assistance systems....

TOPICS:

VCO operates at 1680 MHz

August 28, 2014 3:03 pm | Comments

Crystek’s (Fort Myers, FL) CVCO55CC-1680-1680 VCO (Voltage Controlled Oscillator) operates at 1680 MHz with a control voltage range of 0.5 V to 4.5 V. This VCO features a typical phase noise of -117 dBc/Hz at 10 kHz offset and has desirable linearity....

TOPICS:
Advertisement

Ethernet I/O module features 4 analog outputs, 5 digital inputs, and 5 digital outputs

August 28, 2014 2:41 pm | Comments

ICP DAS USA, Inc. (Lomita, CA) introduces ET-7024, a multifunctional Ethernet I/O module with 4 analog outputs, 5 digital inputs, and 5 digital outputs. Each analog output can be configurable to put out current or voltage. It supports a variety of selectable analog output types....

TOPICS:

LED power supply offers optional dimming

August 28, 2014 11:52 am | Comments

Stadium Power has launched a range of LED drivers for indoor and outdoor use in LED-based lighting and signage applications. The new range includes the LDP Series, offering 24-, 36- and 48-V constant current outputs over …

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading