Advertisement
Product Releases
Advertisement

Tantalum capacitor protects from short circuit conditions

Wed, 01/23/2013 - 11:02am

LISTED UNDER:

KEMET Corporation introduced its new T496 Hi-Rel Fused Commercial-Off-the-Shelf (COTS) MnO2 Series of tantalum surface mount capacitors. These devices are ideal for use in high reliability applications where a capacitor failing short will disrupt the overall performance of the system. The internal fuse in the capacitor results in a fail open condition.

The T496 Hi-Rel Fused COTS MnO2Series is available in DLA (DSCC) Drawing 04053 and can be ordered with a variety of options including surge current testing, Weibull Grading, termination options, and various ESR levels. A customizable testing and screening protocol is available upon customer request.

Typical applications include decoupling and filtering in computing, telecommunication, defense, and industrial end applications requiring a built-in fuse capability. This includes filtering for point of load and switch mode power supplies.

Typical markets include defense and aerospace, computer, industrial, lighting, and telecommunications. These devices range in price from $0.50 and higher, and complement KEMET's T493, T497, T513, T540, T541, and T543 series of COTS capacitors.

Additional technical information

KEMET's T496 Hi-Rel Fused COTS MnO2 Series is designed to operate in high-current applications and includes a fusing mechanism. The built-in fuse element provides excellent protection from damaging short circuit conditions in applications where high fault currents exist. This type of fuse is ideal for high-current applications where no external series resistance is used. This solution will impact the failure mode process, replacing a short circuit situation (with high risk of circuit damage) with an open circuit. This type of capacitor will prevent any circuit interruption due to the capacitor failure mode. Fuse activation will occur (at room temperature 25 degrees C) within 1 second at fault currents of 4 amps and higher. As the fusing process is initiated, a post actuation resistance of greater than 10 megaohm is assured (at 25 degrees C).

 
Additional information about KEMET can be found at http://www.kemet.com.
Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading