OTEK releases its model LPI opto-isolated loop powered transmitter that uses no transformers and choppers that reflect noise on the transmitter’s line. The transmitter uses a special technique to convert the incoming 4 mA to 20 mA frequency to drive the opto-isolator. The device comes in a miniature plastic case (metal on request) that can be din-rail mount, Velcro attached or in line with existing wiring.VDC and Hertz I/O options are also available.The LPI is useful in hazardous applications as an isolator or buster
Stewart Connector released the SS-51 series of punch down blocks engineered to allow the field termination of insulated AWG 22-26 solid copper wire in Category 6a as well as in Category 7 applications in which wires are individually shielded. The RoHS-compliant parts employ Insulation Displacement Contact technology, they allow for rapid mass termination of multiple wires in state-of-the industry telecom and datacom systems. The blocks boast a notched-head design to secure the wires in the plastic housing prior to termination to ensure a mechanically stable connection between the conductor, and terminating contact
Agilent Technologies, Inc. introduces four next-generation PXIT modules for optical transceiver manufacturing. The flexible modular platform allows optical transceiver manufacturers to combine key instruments needed to perform required measurements in one mainframe via the same interface, reducing the cost of test and increasing production throughput. The N2100B PXIT 8.5 Gb/s digital communications analyzer is a four-slot module
Noise Com announces a software option for the GPS7500 Noise and Interference Generators that delivers both forward, reverse and a forth/back frequency sweep over the entire 40 MHz output bandwidth at any of the L1 and optionally L2 or L5 GPS test frequencies. The software can provide swept frequency signals at any of the output power levels from -126.5 dBm to +21 dBm.
National Instruments introduces its PXI-4498 and PXI-4496 dynamic signal acquisition (DSA) modules that are designed for sound and vibration applications. They offer 16 simultaneous 24-bit analog inputs per module and IEPE constant current signal conditioning for precision measurements with microphones and accelerometers in high-channel-count systems such as noise mapping, beam-forming applications and structural vibration.
Linear Technology introduces the LTC4268-1, a Power over Ethernet (PoE) interface controller with a synchronous, current mode, switching regulator for delivering precise regulation and high efficiency to power-hungry Powered Devices (PDs). The device provides up to 35W for 2-pair systems and as much as 70W for 4-pair systems. The IC features a high-performance switching regulator optimized for isolated PoE applications, and it incorporates the company’s NoOpto feedback topology to provide full IEEE 802.3 isolation without the need for optoisolator circuitry
The eAutomation Group of Advantech introduces its PCI-1202U PCI interface card with two AMONet master ports that support the company’s AMAX line of motion and control products. It is a hybrid RS-485 based network similar to other proprietary fieldbus networks intended to offer high speed deterministic communication. Common CAT5 cable is the recommended medium, making it appropriate for distributed motion control applications.
Pepperl+Fuchs added the WCS3B Read Head to its PosiTrack Position Tracking System. Designed to provide simplified installation and improved operational performance, this read head provides a 32 mm slot width, compared with the 25 mm slot width available from the existing WCS3A model. The result is increased reader/code rail misalignment tolerances of 20 percent on the horizontal axis and 40 percent on vertical axis.
Luminus Devices, Inc. announced its PhlatLight PT54 chipset engineered for small microdisplays including high brightness pocket projectors and heads-up projection displays and a variety of general illumination applications. The chipset includes separately packaged red, green and blue LEDs that are each 5.4 mm2. When combined, the chipset produces up to 1,400 peak white lumens in pulsed mode operation.
Cypress Semiconductor Corp. announces its PSoC CapSense flexible touch screen controller that supports projected capacitance and surface capacitance technologies across a range of screen sizes and types. It is suitable for small screen portable devices such as mobile handsets, smart phones and portable media players, as well as for larger screens required by applications such as games, POS terminals and white goods.
OSD Displays announces its OSD0320HA9T0 QVGA 3.2¨ TFT with integrated four-wire resistive touch screen. This display features a digital RGB 16-bit TTL interface with memory to minimize the communication burden on system processors. The panel supports 3V logic. The resolution and size of this module are suitable for portable multimedia devices. It features an additional touch panel, 3V logic interface and a CPU interface. Viewing angles offer a 45/45/35/15 viewing cone.
American Bright Optoelectronics announces its photo interrupter and reflective sensor products that include a range of off-the-shelf components and a custom-tailored, applications-specific capability. These products are suitable for applications in bill, coin and card acceptors, automatic faucet and flush controllers, fax, copier and paper level detectors, alarm components, presence detection devices, RPM sensors and optical encoders
Microtips Technology introduces its MTF-T085AMSLN 8.5¨ true digital TFT. Features include an 8.5¨ TFT active matrix, a resolution of 800 × RGB × 480 dots and full colors, and white LED backlighting. It is also available with a touch screen. Outline dimensions are 206.10 mm × 124.48 mm ×7.30 mm.
CIP announces its reflective semiconductor optical amplifier (RSOA) family which offers the performance to implement advanced PONs (passive optical networks) based on wavelength division multiplexing (WDM). Capable of delivering more than 20 dB of optical gain, this component provides optical data transmission at gigabit Ethernet rates without the need for either a local wavelength stabilized source or temperature control. This combination provides a platform for access network providers to boost performance.
Infinilux announces its series of PAR4 incandescent replacement lamps that are powered by the Cree XLamp LED technologies, including the 7090 XR-E series LED that is capable of producing 100 lumens per Watt. These new lamps are drop-in replacements for many standard commercial, industrial and consumer light bulbs such as the standard 50W PAR36 flood lamp that is typically found