Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Panel Potentiometer Offers A Long Life Cycle

July 30, 2008 6:20 am | Comments

Offering a long life of 500,000 cycles, the P10L from Vishay Intertechnology is a panel potentiometer with a temperature coefficient down to ±150ppm/°C and small 9.6-mm size. Featuring a fully sealed IP67 package with pure Sn terminals, the potentiometer is intended for control panel, low-cost actuation proportional pedal, and

Dual Output DC/DC Converters Targeted for Military and Avionics Applications

July 30, 2008 5:55 am | Comments

XP Power added the MTC15 and MTC30 dual output DC/DC converters to its MTC Series of fully encapsulated COTS 4 W to 35 W line. Suitable for military and avionic platforms with a nominal 28 VDC input, the 15 W and 30 W units are available with either ±12 VDC or ±15 VDC outputs. Offering a wide input range from

Antenna Can Be Mounted Indoors and Outdoors

July 30, 2008 5:27 am | Comments

Offering a low profile, indoor/outdoor solution for voice or data device applications, the 3dBi from Astron Wireless Technologies is an omni directional dipole antenna that is suitable as a window or wall mount antenna. These antennas were initially developed for Wireless Local Loop (WLL) phone terminals as an alternative to

Advertisement

Voltage Translator Uses Automatic Direction Control

July 29, 2008 12:49 pm | Fairchild Semiconductor | Comments

Offering independent, automatic direction control performing at 1.1 V, Fairchild Semiconductor’s FXL2SD106 4-bit dual-supply voltage translator eliminates the need to program a general purpose IO and reduces the number of pins required for control from 20 to 16. The 2.5 × 3.5-mm 16-pin DQFN-packaged device

LEDs Combine SMT with Through-hole Features and Capabilities

July 29, 2008 10:12 am | Comments

Lumex announced a line of surface-mount LEDs that are positioned to combine surface-mount technology (SMT) with the features and capabilities of through-hole, leaded T-5 mm epoxy lens LEDs. OctoLEDs devices offer brightness levels of up to 7,000 mcd (dependent on color) when driven by the common If of 20 mA. OctoLEDs SML-H1505xxx-TR can be used in applications such as front panel, PCB multi-LED and industrial control or fault indicators.

Software Operates on LynuxWorks

July 29, 2008 6:21 am | Comments

Working on LynuxWorks LynxOS 4.2 and LynxOS 5.0 real-time operating systems, Aonix’s PERC Ultra 5.1 cross development and target support software sets the name of each LynxOS thread to match the corresponding Java thread name for thread-aware tools, such as LynuxWorks’ SpyKer Embedded System

Data Logger Offers Versatility in Geotechnical Applications

July 29, 2008 6:10 am | Comments

Offering versatility in geotechnical applications, the DT80G and DT85G from CAS DataLogger, are two dataTaker GeoLoggers that work with a host of geotechnical sensors including extensometers, piezometers, inclinometers, strain gauges, pressure cells, crack meters, tilt meters and also support

Miniature Controller Delivers Complete IP Connectivity

July 29, 2008 5:53 am | Comments

Offering complete IP connectivity and security in a small form factor, the CO2144 from Connect One, is the latest addition to the iChipSEC family of machine-to-machine IP Controllers. This 10 x 10 mm chip supports wireless LAN and cellular standards making it suitable for

TOPICS:
Advertisement

Supplies Perform at 48 VDC Output

July 28, 2008 12:02 pm | Comments

Operating with output voltages of 12 and 48 VDC, SolaHD’s SDN16-12-100P, SDN9-12-100P and SDN5-48-100P single-phase DIN Rail power supplies offer sag immunity, transient suppression and noise tolerance. The Power Factor Correction-designed devices are well suited for industrial process controls, machine tools and other equipment exposed to a harsh factory floor environment, including Class 1, Div. 2 hazardous

Design Suite Employs Filter Software

July 28, 2008 10:40 am | Comments

Using filter synthesis and analysis software from Nuhertz Technologies, AWR’s Microwave Office design suite directly integrates “delay equalization with off-axis quadruplet and real zeros”. According to the company, the program reduces required computation

Low-Chlorine Content Resin Targets Halogen-free Products

July 28, 2008 10:33 am | Comments

Ticona Engineering Polymers announced a new grade of Fortron PPS that reduces the amount of chlorine contained in the formulation, thereby enabling electrical and electronic component original equipment manufacturers and their suppliers to design and make products that will comply with

OMAP3530-Based Development Board Features Cortex-A8 Graphics

July 28, 2008 7:45 am | Comments

Integrating an ARM Cortex-A8 graphics engine and high-performance TMS320C64x+ DSP core, the Beagle Board development platform (part number 296-23428-ND) from Digi-Key provides developers an environment with the same peripherals and usage mode for flexible USB and standard PC expansion. The 3 x 3-inch board’s 600-MHz superscalar graphics chip has branch prediction and multiple instruction pipelines

Transceiver Integrates DC-DC Converter

July 25, 2008 8:36 am | Analog Devices, Inc. | Comments

Incorporating a DC-DC converter to supply isolated power, Analog Devices’ ADM3251E RS-232 transceiver includes a serial communications interface for use in harsh HVAC, industrial and medical applications. The Pb-free 13 × 10.56-mm 20-lead SMT-packaged device integrates a line driver, line receiver, oscillator, rectifier, regulator, voltage doubler, voltage inverter and transformers into a single-chip

TOPICS:
Advertisement

Enclosures Target Handheld Electronics

July 25, 2008 8:11 am | Comments

Having designs dedicated to desktop and handheld electronics, TEKO Enclosures’ TEKBOX range of keypad enclosures are appropriate for applications such as data entry keypad devices for point-of-sale, test and measurement, medical and computer equipment. The 3.70" × 6.30” × 1.43” TEKBOX-SLANT and 6.30” × 3.70” × 1.43” TEKBOX-SLOPE include sloping front keypads, contacts for

TOPICS:

MOSFETs Yield 1.5 A Output Current

July 25, 2008 7:26 am | Microchip Technology Inc. | Comments

Generating a peak output current of 1.5 A, Microchip Technology’s MCP1415 and MCP1416 single-output MOSFET drivers operate over a voltage range from 4.5 to 18 V. The inverting MCP1415 and non-inverting MCP1416 come in a 5-pin SOT-23 package and have excellent latch-up immunity. The devices are well suited in consumer

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading