Product Releases
Subscribe to ECN Magazine Product Releases

Mini Triax Accelerometers Target Space-constrained Apps

March 3, 2008 6:17 am | Comments

Well-suited for use in applications where space is at a premium, the 3023M20 miniature triaxial accelerometer weighs only 2.4g with a vertical dimension of 0.28". Using the latest in quartz shear technology coupled with 2-wire internal IEPE electronics, the device contains three miniature quartz laminar shear mode accelerometer elements orthogonally mounted into a welded  titanium housing.

DC/DC Railway Converter in Plug-in Format Meets IEC 61373 Categories 1 A and B Shock and Vibration Standards

March 3, 2008 6:13 am | Comments

Absopulse Electronics’ DCW 150R-EH Series is a plug-in DC/DC converter with wide input ranges designed for railway and other heavy-duty applications. It can be operated from 48V DC (28V to 74V range), 72V DC (42V to 110V) or 110V DC (57V to 168V) supply voltages. This 100W converter provides output voltages of 12V, 24V, 48V or 110V DC. Other input and output configurations are also available.  The device meets the requirements of

No-Noise, Four-Channel White LED Drivers Feature True-load Disconnect in Shutdown

March 3, 2008 6:06 am | Comments

Leadis Technology, Inc. announced the LDS8845 and the LDS8846 family of no-noise, highly-efficient 4-channel white LED drivers. These devices target low-cost handsets and portable products that use lower-VF white LEDs and lower-cost TFT-LCD modules. The family offers part-to-part LED current accuracy better than 7.5 percent and channel-to-channel matching better than 3 percent.


Stand-alone GPS Receiver Module with UART-NMEA Interface

March 3, 2008 6:05 am | Comments

NavSync’s TrineX CW27 is a self-contained GPS receiver module based on the NemeriX NX3 high sensitivity A-GPS single chip receiver. Using a new baseband processor and RF front end, the module performs in a small SMT package to help minimize power consumption and maximize battery life. It takes up 24 mm × 24 mm of PCB space and connects directly to the host system through a UART using NMEA protocols for enhanced performance and flexibility.

I/O Module Is Fully Upgradeable and Recoverable

March 3, 2008 5:52 am | Comments

Accurate Technologies' CANverter I/O Module enables bi-directional conversion between CAN and analog/digital signals. Version 2.0 is fully field upgradeable and recoverable. Users can instantly check for channel status or firmware versions using the Device drop-down menu in the CANverter Configuration Tool. The tool has an upgraded look and presents functions in a more user-friendly manner based on customer feedback

Multi-I/O PMC for Diverse I/O Requirements

February 29, 2008 9:46 am | Comments

Aitech Defense Systems offers a multi-I/O PMC that provides a variety of configuration options for different I/O environments. The low power, single-width M705 features PMC density with up to five dual channel, dual-redundant MIL-STD-1553B channels, 16 ARINC-429 receive channels and eight ARINC-429 transmit channels, up to six RS-232/422/485 serial channels and eight opto-isolated digital discrete input channels, all of which reduce the number of I/O cards when developing subsystems.  Additional board options include an ARINC 708 Weather Radar interface contained as VHDL within the large on-board FPGA.

Mini PC Offers Built-in PCI Expansion Card Slot Capability

February 29, 2008 7:56 am | Comments

Stealth Computer Corporation released a small form factor mini PC with built-in PCI expansion slot capability. The LPC-450PCI Little PC uses Intel’s latest Core 2 Duo processor technology for desirable Mini PC performance. The anodized aluminum chassis measures just over 2 inches tall having the overall footprint approximately the size of a hard cover novel, measuring 10" × 5.8" × 2.8" and weighing approximately 10 lb. or 4.5 kg. Using open and available PCI card slot

LED Bulbs are Available in a 40° Light-emitting Viewing Angle

February 29, 2008 6:38 am | Comments

LEDtronics announced its latest generation of PAR30-Style LED spotlight bulbs which is made up of five 3W high-power LEDs. They are direct incandescent PAR30 replacements, combining advanced Light Emitting Diode (LED) technologies, standard 25 mm Edison screw-in bases, and light optimizing designs producing 480 to 544 lumens of vivid light depending on the bulb model. They are available in a 40° light-emitting viewing angle, running on 80V to 260V AC current.


Interlocking Fused Terminal Strips Feature Square Screw Turrets with Thicker Wall Sections

February 29, 2008 6:27 am | Comments

OKW Electronics has launched Camden Electronics’ CFTBN series fused terminal strips for wiring lighting equipment, power supplies, fire and security systems, and domestic equipment. The terminal strips incorporate a spare fuse option in the fuse carrier allowing technicians to immediately locate a replacement in the event of a blown fuse, resetting the circuit with minimum delay. The fuse carrier is suitable for glass and ceramic fuses, has a comfortable finger grip

Miniature Load Cell Sensors and Interface Device with USB or Analog Outputs

February 28, 2008 4:25 am | Comments

Loadstar Sensors, Inc. announced the iLoad Mini miniature load cell, and the DQ-1000 versatile signal conditioning board that enables three different outputs: digital USB, 0.5V to 4.5V analog or 2 mV/V. The sensor offers ease of use in a rugged, low profile 1.25" diameter package and heights between 0.5" and 1" depending on the configuration. The separation of the load cell from the signal conditioning interface board gives greater flexibility to designers and inventors who want to fit the sensor into small spaces.

Power Management IC Delivers Low Power Loss with Low EMI

February 28, 2008 4:08 am | International Rectifier | Comments

International Rectifier introduced the iP2005A. The device is optimized for very low EMI, eliminating the need for external snubber circuits in EMI-sensitive designs such as consumer game consoles. By eliminating external snubbers, it reduces per phase power loss by up to 2.3W compared to the previous generation device that required an external resistor and capacitor snubber with values of

Narrow Profile Power Supplies Feature Remote Sensing Capability

February 27, 2008 10:55 am | Comments

Acopian's narrow profile WN8 series of power supplies, with outputs from 3.3V DC to 48V DC and from 120W to 288W, have been recognized for compliance with the requirements of UL508. They can be used on an input of 90V AC to 265V AC or 110V DC to 350V DC. All models have power factor correction and output inhibit capability - applying between +3V DC and +25 VDC to the Inhibit terminal will disable the output.

Servo Drive is Hardened for Industrial and COTS Military Uses

February 27, 2008 4:03 am | Comments

Copley Controls has developed a hardened version of the versatile panel-mounting Accelnet servo drive to meet both military and extreme industrial environments. The drive’s extended temperature, humidity, vibration and shock ranges provide added security in non-extreme applications. Designated Series R20, the hardened drives provide networking and stand-alone motion control for brush and brushless motors


HCMOS Oscillator Offers High Frequency Stability and Low Aging Rate

February 26, 2008 10:46 am | Comments

The Connor-Winfield XO125 is a 5V Voltage Controlled Oven Compensated Controlled Crystal Oscillator (VCOCXO) with an HCMOS output. It is designed for Stratum 3E applications requiring a low aging rate and tight frequency stability. The device is housed in the standard CO8 EURO package with standard frequencies of 10 MHz and 12.8 MHz available.

Terminal Blocks Allow for the Interfacing off Internal and External Wiring

February 26, 2008 9:52 am | Comments

BlockMaster Electronics announced the expansion of their high power line of thru-panel terminal blocks with the addition of the Series OTB-388 with a terminal pitch of 21 mm and Series OTB-488 at a 27 mm terminal pitch. Both of these carry a current capacity rating of 100A at 600V. The two series are designed for motor control, gen set, electric heating


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.