Including information such as emission patterns, the coordinates of the emission point, as well as the direction, intensity, and wavelength, an online database at www.osram-os.com/ray-files from OSRAM Opto Semiconductors provides ray data files for its entire LED portfolio. Engineers can immediately view and download all the ray data and a custom CAD model for board design
Ridding the need of data control cables, Intersil Corporation’s ISL34340 SERDES IC transports 27 bits of video data and bi-directional I2C into a single LVDS cable measuring up to 10 meters long. The 64-lead EPTQFP-packaged device has a DC balanced 8b/10b code and video flow that allows 24 RGB bits and three video control bits into a single LVDS pair. The IC includes embedded termination
OKW Electronics’ CAMDEN DIN-Rail enclosures are designed for snap-in mounting on DIN EN 50/022/035/045 (TS 35/32/15) rails or direct cabinet mounting. The devices are appropriate for applications including automation, building and safety, sensors, relays, and signal distributors. The enclosures can be used as a subrack for interfaces, electronics modules, amplifiers, or transformers. The cases offer different connection options for commercial components, such as terminals, PCB plug headers, or front connectors
With a package footprint of 15 mm² and a height of 2.8 mm, the LTM4616 DC/DC µModule from Linear Technology includes all the support components needed for a single or dual point-of-load (POL) regulator: inductors, capacitors, DC/DC controller, compensation circuitry, and power switches.
Targeting DDR cache-memory backups, Maxim Integrated Products’ DS2731 power-management IC (PMIC) integrates a single-cell Li+ charger with FETs at a rate up to 1.5 A from a 12-V supply to eliminate over 15 discrete components in existing solutions. The device uses an internal comparator with a power-steering system to switch from system to battery power when the auxiliary supply falls below
Delivering up to 45 W, POE45-120 Series of power-over-ethernet (PoE) splitters from Phihong divide the power and data and converts the PoE source to a regulated DC power source for Wimax, multi-radio access points, thin-client, and other network devices. The Gigabit-compatible modules mount adjacent to the Ethernet device
Delivering up to 4000 Vrms of contact, CIT Relay & Switch’s J115F1 Series high dielectric-optioned relays have a minimum contact-to-contact strength of 1500 Vrms in SPST N.O., SPST N.C., or SPDT contact arrangements. The AgSnO2 or AgSnO2In2O3 devices provide voltage options from 3 to 100 VDC and
Measuring 4.84” x 6.54” x 2.22” in IP65-rated aluminum-enclosed housing, DongAh Elecomm’s LED-240 Series 240-W switching power supplies are designed for outdoor LED lighting and sign applications. Meeting NEC Class II safety requirements, the units have four 60-W 12-VDC outputs rated at 5 A each. The UL1310/1585-approved devices offer a universal input ranging from 90 to 264 VAC with a frequency range from 47 to 63 Hz and over 85% efficiency. The EN6100-3-2-compliant supplies
Providing a bridge supply voltage of up to 200 V, Supertex’s MD7120 full-bridge power MOSFET driver has an output voltage range from 12 V to 200 V with ±5 ns dead time matching and rise or fall times of less than 30 ns with a typical 1 nF load. The N-channel device drives over 100 W output with over 90% efficiency from normal logic level inputs by directly coupled internal level translators. The internal core of the RoHS-compliant driver consists of over-temperature, under-voltage and current
Having a resistance range from 0.01 O to 550 kO, Vishay Intertechnology’s D2TO35 35-W thick film power resistor has a thermal resistance of 4.28°C/W junction-to-case at 25°C. The tinned-copper connections for the device support soldering temperatures at +270°C and are specified for operation in a temperature range from -55°C to +175°C. The RoHS-compliant resistor features a standard temperature coefficient of
Appropriate for lighting applications using batteries and lighting fixtures with transformers, PREMA Semiconductor’s PR4101 Series buck converters drive single or multiple LEDs with currents from 100 mA up to several Amps. Accepting an nominal input from 9 to 40 VDC, the inductive devices can be modified to accept 12 or 24 VAC with additional components. With a standby current of less than 35 µA, the buck converters
Presented as the first commercially available, the SMK 15.4 development kit from Stantum Technologies can enable designers and integrators to develop a multi-touch display user interface. The resulting interface lets users simultaneously move an unlimited number of fingers, nails or utensils (such as styli) on a screen.
Providing an output from 3 to 5 kVA, Falcon Electric’s ED-FPC Series rackmount frequency and phase converters accept a 3-phase input with a frequency range from 40 to 450 Hz and provides a single-phase 120 VAC at 50, 60, or 400 Hz. The 4µ devices provide a sinewave output with ±3%
Reducing noise and distortion in CATV set-top boxes, DVRs, PC TV tuner cards and other tuner-on-board applications, the AIT1032 from Anadigics, is a 1 GHz tuner that incorporates an upconverter, downconverter, VCO, synthesizer, RF and IF amplifier, and RF and IF gain control functions. The tuner also provides
Delivering a power density of over 76W per in2, the EN5395QI from Enpirion, is a 9A DC/DC converter that features integrated-inductor technology and a high switching frequency. The technology enables the PwrSoC (power supply on a chip) to attain noice immunity with a small footprint. The part also offers