Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases
View Sample

FREE Email Newsletter

ECN Daily

Encapsulated DC/DC Converter for Heavy Duty Applications

December 20, 2007 9:41 am | Comments

Absopulse Electronics’ PDC 250 line of DC/DC converters are designed for operation in harsh environments. Full encapsulation in a thermally conductive MIL-spec. silicon rubber compound ensures immunity to shock, vibration, humidity, moisture, salt and airborne contaminants. The unit performs to full specification at temperatures from -40°C to 70°C with installation on an appropriate size heat-sinking plate.

Sychronous Buck Power Block Offers Space Savings In POL Converters

December 20, 2007 9:26 am | International Rectifier | Comments

International Rectifier introduced the iP1206, a fully optimized device for synchronous buck applications including telecom and networking equipment. It is the latest addition to the iPOWIR integrated power conversion stage product line, designed for two-phase single output applications up to 30A or dual independent outputs up to 15A.

Parallel Pure Sine Wave Inverter

December 20, 2007 9:19 am | Comments

Schaefer, Inc. introduced the InverTek 1000 pure sine wave inverter with parallel capability. The inverter has a power rating of 1000W, which can be paralleled for ease of integrating additional units as application demands increase. Pure sine wave outputs ensure  clean, utility grade pow It specifies an input voltage of 12V DC with outputs of  either 115V AC or 230V AC. Units feature a low power

Advertisement

High-Density Modular Power Supply for Noise Sensitive Applications

December 20, 2007 9:07 am | Comments

Bravo Electro Components introduced its XUP Series of Modular/Configurable Power Supplies. The low noise/ripple of less than 10 mV(typical) and operating temperature of -40°C to +75°C make them suitable for sensitive equipment in harsh environments. The SEMI F47 compliant power supply family consists of four power chassis that are 2.5" tall and 7.3" deep. The 2UP chassis' width is 4.13" with space for

208V Option for UPS

December 20, 2007 8:57 am | Comments

Emerson Network Power announced a version of the 6kVA Liebert GXT2 UPS that is designed specifically for 208V applications. The UPS delivers on-line double-conversion UPS protection for up to 4,200W of equipment in 5U of rack space. It is designed to automatically detect input frequency of 60 or 50 Hz, and features user-replaceable, internal batteries that provide approximately seven minutes of runtime

3-Phase UPS Dissipates Less Heat

December 20, 2007 8:50 am | Comments

HP’s Parallel 3-Phase Uninterruptible Power Systems (UPS RP36000/3) provides the high level power protection and dissipates less heat into a data center. It enables attached servers to save all work in progress and initiate a shutdown in the event of power loss, and restores it with Thermal Logic power policies to ensure business picks up where it left off.  This pre-racked uninterruptible power systems provides 36 KW

Miniature TCVCXO for Cellular Infrastructure

December 20, 2007 7:22 am | Comments

Bliley Technologies, Inc. introduced its RoHS compliant, TV105A Temperature Compensated Voltage Controlled Crystal Oscillator (TCVCXO). Designed primarily for cellular infrastructure, GPS and telecommunication system applications, the 3 mm × 5 mm series offers a miniature package coupled with very good phase noise performance, as well as a wide range of options in temperature stability, operating frequency range and electronic frequency adjustment.

Layered Conductive Polymer Aluminum Capacitors Provide Low ESR and ESL

December 20, 2007 7:01 am | Comments

Nichicon Corporation released the F11 series of molded conductive polymer capacitors. The layered aluminum design provides the ultra low ESR and ESL over a wide frequency range needed in today’s high performance LSI. The series uses layered aluminum construction, conductive polymer electrolyte, and a three terminal design all in a molded package

Advertisement

TFT LCD Interface Controller Supports All Modes

December 20, 2007 6:40 am | Comments

The DVS-1600 high-integration OEM interface controller from Digital View provides a range of inputs and LCD panel support. Inputs include DVI, VGA, S-Video, composite video, and numerous modes. The board is pre-programmed for many panel models and resolutions

PATA 1.8' Solid State Drive Boasts Low Power Consumption

December 20, 2007 6:00 am | Comments

SMART Modular Technologies announced its XceedLite parallel ATA (PATA) solid state drive (SSD). Operating from +3.3V DC to +5V DC, the drive typically draws 80 mA current in read, 70 mA in write, and 9 mA in passive mode. It is suited for use in growth markets such as tablet PCs, ruggedized notebooks, embedded computing, industrial applications, and medical equipment in which battery life, durability and reliability

TOPICS:

Electro-Pyrotechnic Initiator Chip Resistor Offers Joule Effect Ignition

December 20, 2007 5:52 am | Comments

Vishay Intertechnology, Inc. their electro-pyrotechnic initiator chip resistor (EPIC), said to be the industry’s first such device to offer Joule effect ignition for very fast firing times down to 50 µs, and a no fire/all fire ratio up to 70 percent. EPIC resistors, also known as bridge resistors, are resistive elements that convert electrical energy into heat energy in a precise electro-thermal profile for the purpose of initiating a series of pyrotechnic events in a controlled energetic reaction.

Telecom Card Combines Protocol/Packet Processing, WAN Access, Signaling

December 20, 2007 5:27 am | Comments

Emerson Network Power’s KSI8560 is an advanced mezzanine card for telecommunications applications. It combines a PowerQUICC III MPC8560 controller with up to eight channelized E1/T1 spans in order to process protocols, packets, signaling, and WAN access for

Self-Clinching Cable Ties are Permanent Without Screws or Adhesives

December 20, 2007 4:25 am | Comments

PEM self-clinching cable tie mounts and hooks provide secure attachment points for mounting wires and cables to electronic chassis or enclosures.  Model TD cable tie mounts and model TDO hooks can be installed quickly and permanently without screws or adhesives. Their locations and positions are set during the design process to provide optimal layout for wires and cables during final assembly. Both types are RoHS compliant and are available in several sizes for installation in metal sheets from .040"/1.02 mm to .125"/3.18 mm.

Advertisement

Chip Enables Simultaneous Audio Connections of Consumer Electronics

December 19, 2007 9:51 am | Comments

STS Inc. announced the availability of its fourth-generation chip (DARR81) for digital wireless audio platforms in the connected home or office. The chip enables simultaneous audio connections of consumer electronics (CE) devices, such as headphones, speakers, home theater systems, flat panel TVs, game consoles, iPod and portable media player docking stations, and PCs for uninterrupted streaming of HD uncompressed wireless audio.

Pocket Reference Oscillator Integrates HCMOS Oscillator in SMA Housing

December 19, 2007 9:38 am | Comments

Crystek introduced the Pocket Reference Oscillator (PRO Series), said to be the industry’s first frequency control product to integrate a complete HCMOS crystal clock oscillator in a rugged SMA housing. The oscillator offers frequency stability of ±25 ppm over 0°C to 70°C (operating temperature range rated at -40°C to 85°C; storage -45°C to 90°C). They are available off-the-shelf in frequencies from 4 MHz to 125 MHz

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading