Pepperl+Fuchs' RAL series photoelectric sensors feature a multiple-beam light grid and one-piece metal slot housing in widths from 50 mm to 150 mm, 5 kHz switching frequency, a one-shot timer, beam suppression and sensitivity adjustment, and can detect targets as small as 0.5 mm with response times as fast as =0.1 ms. The sensors require just one transistor with N/O or N/C PNP output.
Acopian's 720W power supplies can be used to provide either a constant voltage or a constant current. Models with wide output voltage ranges can be adjusted down to 0V, and both voltage and current can be programmed with 0V to 10V control voltage inputs. Voltage and current monitor outputs and an inhibit terminal are included on the pluggable connectors that enable easy wiring of the control and input leads.
Allegro added a high-brightness, adjustable constant current LED driver to its portfolio of display driver ICs. Targeted at the automotive lighting market, this LED driver is also a fit for industrial and consumer LED applications. This device is designed to operate over the typical automotive battery and temperature ranges. The input voltage range is specified down to
Pentek released its Model 7141 Dual Multiband Transceiver with FPGA. It is a complete software radio system for connection to HF or IF ports of a communications system. The device's signal-to-noise ratio and the spurious free dynamic range are improved by 10 dB, when compared to many competitive products, according to the company. It accepts two full scale
LEDtronics drop-in replacement MR16 3W LED bulbs can handle voltages variations of from noisy AC/DC power supplies, thereby eliminating the need to stock bulbs of different voltages. The bulbs have bi-pin bases identical to MR16 bulbs, making light output of 102.9 lumens using only 2.6W at 12V DC, 120.6 lumens using 3.7W a 12V AC, and 140.7 lumens using 3.8W at 24V DC.
Renco Electronics, Inc. announced the expansion of the RL-8100 Series of Shielded SMD Power Inductors. This series now has seven package sizes with a total of 125 standard inductance values up to 180 uH and current capabilities up to 3.50A.
Absopulse Electronics’ PDC 250 line of DC/DC converters are designed for operation in harsh environments. Full encapsulation in a thermally conductive MIL-spec. silicon rubber compound ensures immunity to shock, vibration, humidity, moisture, salt and airborne contaminants. The unit performs to full specification at temperatures from -40°C to 70°C with installation on an appropriate size heat-sinking plate.
International Rectifier introduced the iP1206, a fully optimized device for synchronous buck applications including telecom and networking equipment. It is the latest addition to the iPOWIR integrated power conversion stage product line, designed for two-phase single output applications up to 30A or dual independent outputs up to 15A.
Schaefer, Inc. introduced the InverTek 1000 pure sine wave inverter with parallel capability. The inverter has a power rating of 1000W, which can be paralleled for ease of integrating additional units as application demands increase. Pure sine wave outputs ensure clean, utility grade pow It specifies an input voltage of 12V DC with outputs of either 115V AC or 230V AC. Units feature a low power
Bravo Electro Components introduced its XUP Series of Modular/Configurable Power Supplies. The low noise/ripple of less than 10 mV(typical) and operating temperature of -40°C to +75°C make them suitable for sensitive equipment in harsh environments. The SEMI F47 compliant power supply family consists of four power chassis that are 2.5" tall and 7.3" deep. The 2UP chassis' width is 4.13" with space for
Emerson Network Power announced a version of the 6kVA Liebert GXT2 UPS that is designed specifically for 208V applications. The UPS delivers on-line double-conversion UPS protection for up to 4,200W of equipment in 5U of rack space. It is designed to automatically detect input frequency of 60 or 50 Hz, and features user-replaceable, internal batteries that provide approximately seven minutes of runtime
HP’s Parallel 3-Phase Uninterruptible Power Systems (UPS RP36000/3) provides the high level power protection and dissipates less heat into a data center. It enables attached servers to save all work in progress and initiate a shutdown in the event of power loss, and restores it with Thermal Logic power policies to ensure business picks up where it left off. This pre-racked uninterruptible power systems provides 36 KW
Bliley Technologies, Inc. introduced its RoHS compliant, TV105A Temperature Compensated Voltage Controlled Crystal Oscillator (TCVCXO). Designed primarily for cellular infrastructure, GPS and telecommunication system applications, the 3 mm × 5 mm series offers a miniature package coupled with very good phase noise performance, as well as a wide range of options in temperature stability, operating frequency range and electronic frequency adjustment.
Nichicon Corporation released the F11 series of molded conductive polymer capacitors. The layered aluminum design provides the ultra low ESR and ESL over a wide frequency range needed in today’s high performance LSI. The series uses layered aluminum construction, conductive polymer electrolyte, and a three terminal design all in a molded package
The DVS-1600 high-integration OEM interface controller from Digital View provides a range of inputs and LCD panel support. Inputs include DVI, VGA, S-Video, composite video, and numerous modes. The board is pre-programmed for many panel models and resolutions