International Rectifier introduced the iP2005A. The device is optimized for very low EMI, eliminating the need for external snubber circuits in EMI-sensitive designs such as consumer game consoles. By eliminating external snubbers, it reduces per phase power loss by up to 2.3W compared to the previous generation device that required an external resistor and capacitor snubber with values of
Acopian's narrow profile WN8 series of power supplies, with outputs from 3.3V DC to 48V DC and from 120W to 288W, have been recognized for compliance with the requirements of UL508. They can be used on an input of 90V AC to 265V AC or 110V DC to 350V DC. All models have power factor correction and output inhibit capability - applying between +3V DC and +25 VDC to the Inhibit terminal will disable the output.
Copley Controls has developed a hardened version of the versatile panel-mounting Accelnet servo drive to meet both military and extreme industrial environments. The drive’s extended temperature, humidity, vibration and shock ranges provide added security in non-extreme applications. Designated Series R20, the hardened drives provide networking and stand-alone motion control for brush and brushless motors
The Connor-Winfield XO125 is a 5V Voltage Controlled Oven Compensated Controlled Crystal Oscillator (VCOCXO) with an HCMOS output. It is designed for Stratum 3E applications requiring a low aging rate and tight frequency stability. The device is housed in the standard CO8 EURO package with standard frequencies of 10 MHz and 12.8 MHz available.
BlockMaster Electronics announced the expansion of their high power line of thru-panel terminal blocks with the addition of the Series OTB-388 with a terminal pitch of 21 mm and Series OTB-488 at a 27 mm terminal pitch. Both of these carry a current capacity rating of 100A at 600V. The two series are designed for motor control, gen set, electric heating
CIT Relay & Switch JH Series is a momentary input switch offered with no LED, one LED or two LEDs. Cap color options include white, black, red, yellow, green, orange, blue, light gray and transparent. Tested electrical life of the series is 500,000 cycles with electrical rating of 50 mA at 25V DC. Contact resistance is <10 milliohm initial. The dielectric strength is 1000 Vrms minimum with insulation resistance of >100 milliohm minimum.
Tecate Industries announced the CAP-XX’s ultra-thin G Series of general-purpose supercapacitors. Comprised of the GS and GW Series of single-cell and dual-cell supercapacitors, the RoHS-compliant parts boast low impedance and a very low profile. The devices offer long-life performance at up to 2.3V in the single-cell versions and 4.5V in dual-cell configurations, with two cells connected in series.
National Semiconductor Corp. introduced a family of micropower precision amplifiers that provide guaranteed maximum offset voltage drift over temperature (TCVOS) as low as ±0.4 microvolts per degree Celsius (uV/°C). The LMP2231 single, LMP2232 dual and LMP2234 quad micropower op amps feature CMOS inputs, 1.6V to 5.5V operation, 10 uA of supply current per channel, low offset voltage of 150 uV and a wide temperature range of -40°C to 125°C.
Silicon Laboratories introduced microcontrollers (MCUs) capable of operating down to 0.9V, enabling portable devices to derive power from a single-cell battery. The C8051F9xx family’s 8-bit architecture with an integrated high-efficiency DC/DC boost converter, which can supply up to 65 mW of power for both internal MCU use and to drive other components, creates a
Zilker Labs introduced adaptive DC DC power controllers for maximizing efficiency in power constrained applications. The ZL2006 and ZL2004 –additions to the company’s Digital DC product family – include new proprietary algorithms that dynamically optimize efficiency as operating conditions change, with no
Minmax's MIHW3000 Series power modules are designed to provide ultra-high levels of isolation 5600V DC in a low profile 24-pin DIP package. Operating input voltage ranges of 9V DC to18V DC, 18V DC to 36V DC and 36V DC to 75V DC which provide precisely regulated output voltages of 5V, 12V, ±12V and ±15V DC. The -40°C to +55°C operating temperature range makes it suitable for
Maxim Integrated Products introduced its DS4412 dual-channel, sink/source current DAC. This I2C-controlled, 4-bit current DAC features two output channels that are explicitly designed for power-supply margin testing and adjustment. Each output channel provides control of a DC/DC power supply by sinking or sourcing current directly into the power supply's feedback node.
Delta Electronics, Inc. introduced the DNQ Family of Point-of-Load (POL), non-isolated converters into their Delphi Series of Board Mounted DC/DC power converters. The device operates from a 10V to 14V input range, provides 25A of single channel output current in a vertically mounted, through-hole or horizontally surface mounted package. It features a programmable output voltage via external resistors and is adjustable from a 0.8V to 5.5V output through this external resistor.
Kontron’s 6U CompactPCI Gbit Ethernet switch for high-end communications is available in three rugged levels. The Kontron CP6923 PICMG 2.16 compliant 6U CompactPCI managed Ethernet switch with 24 link ports and two 10GbE XFP uplink connections comes in three rugged levels defined as R1, R2 and R3. The R2 and R3 versions are available with
Rad-icon Imaging Corporation announced its Shad-o-Box 1024 Hi-Res x-ray sensitive imaging camera that utilizes the company's RadEye x-ray specific digital image sensor. This high-resolution, compact, stand-alone camera features a 14-bit output and parallel digital interface (LVDS) for direct input to a digital frame grabber. Total power dissipation is less than 6W.