Sealevel’s 7203e PCI Express serial interface provides two optically isolated serial ports, each individually configurable for RS-232, RS-422, or RS-485. Each serial port utilizes a high-performance UART with 128-byte Tx/Rx FIFOs that enables data rates to 460.8K bps for reliable high-speed communications in data intensive applications.
CETECOM has selected Rohde & Schwarz (R&S) to enhance their over-the-air (OTA) testing capabilities with a new test system that includes LTE multiple-input, multiple-output (MIMO) and 802.11n functionality. The TS8991 test system can perform OTA measurements for LTE MIMO in addition to all cellular 2G, 3G, and 4G technology standards.
Teseq expanded its broadband amplifier line to include a Class A linear and low distortion model that operates from 10 kHz to 400 MHz with a rated power level of 260 W. For use in commercial or in-house EMC test laboratories, the CBA 400M-260 is appropriate for automotive, military and aerospace BCI
American Sensor Technologies (AST) pressure sensors are serving as components in a remote monitoring system that ensures optimal operations of safety trailers used on remote sites as emergency first aid stations. Mining, construction, oil fields and other industrial sites are often located miles away from medical facilities.
ICP DAS USA has introduced M-7069D, a Modbus RTU based data acquisition module with 8 LED indicators that can be used to monitor the relay output status. Options are provided that allow power-on and safe digital output values to be configured. 4 kV ESD, 4 kV EFT and 3 kV surge protection are provided to enhance noise protection capabilities in industrial environments.
UltraVolt expanded its line of precision high-voltage amplifiers - the HVA Series - capable of operating in DC, reversible, and amplifier modes. The new line of precision high-voltage amplifiers, the 10 HVA-20 HVA Series, is available with unipolar or bipolar output at 0 to 10 kV, 15 kV and 20 kV. Together with
Performance Motion Devices announces a major new release of its Pro-Motion software for Windows-based environments. Pro-Motion 5.0 adds a number of key capabilities including an upgraded axis setup wizard, support for SPI-based motion amplifiers including PMD's ATLAS digital amplifier products, and support for all-in-one embedded motion cards and systems.
Rohde & Schwarz has developed the world's first integrated end-to-end test solution that examines the impact applications have on smartphones and the network using IP and protocol statistical analysis. Equipped with the new R&S CMW-KM051 option, the R&S CMW500 wideband radio communication tester can comprehensively analyze and test IP-based applications....
Murata announced the UDQ series of isolated digitally controlled DC-DC converters developed by Murata Power Solutions. Incorporating a 32-bit ARM7 processor, the 420 Watt regulated UDQ2204/001 model is the first in a series of DC-DC converters from Murata Power Solutions to include a PMBus compatible digital interface.
Stackpole’s ZOV Series of metal oxide varistors is a series of epoxy coated square varistors with sizes from 23 mm to 60 mm. These high-energy varistors come in a single disc, double, triple and quadruple disc versions with pulse current capabilities of up to 80 kA. This series offers energy handling up to
Microchip Technology Inc. announced two new volatile, SPI digital potentiometers (digipots)—the MCP41HV31 and MCP41HV51 (MCP41HVXX)—its first to operate at 10, 12, 18, 24 and particularly 36 volts, for systems requiring wide signal swing or high power-supply voltages.
Vishay Intertechnology added additional 650 V power MOSFETs to its E Series family of devices. These 22 new devices in eight different packages offer an extended on-resistance range from 30 mΩ to 600 mΩ at 10 V and broaden the series' maximum current ratings from 6 A to 105 A.
Ironwood Electronics has recently introduced a new high-performance BGA socket for 0.8mm pitch BGA 78 pin DDR3 packages. The SG-BGA-6374 socket is designed for an 9x13 mm package size and operates at bandwidths up to 8 GHz with less than 1dB of insertion loss.
VPT Inc., a HEICO company, announced the availability of a new series of radiation hardened DC-DC power converters, point of load converters, and EMI filters to power space systems.
Larson Electronics has announced the release of a powerful new LED light built to provide maximum illumination from a compact yet rugged design. Featuring over 29,000 lumens of light output and, inline transformer, and rugged waterproof construction, the LEDP5W-60-1227-20C High Intensity LED Light is an ideal alternative to hot running and fragile HID lighting systems