Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases
View Sample

FREE Email Newsletter

ECN Daily

Amplifiers Now Available in Aftermarket

July 3, 2008 7:00 am | Comments

Lansdale Semiconductor now has the single-source rights to continue to manufacture Freescale’s MC1350 IF, MC1490 RF, and MC1590G monolithic IF amplifiers incorporate automatic gain control in a product life cycle management system. The devices are well suited for telecommunication, commercial (MC1350 and MC1490) and defense/military/aerospace (MC1590G) applications. The RoHS-compliant MC1350 and MC1490 fit well in up to 70 MHz audio and video

Single-Output DC/DC Converter Provides 5 Fused Terminals

July 3, 2008 6:57 am | Comments

Designed for operation in mobile and other rugged environments, the BAP 65-5FD-24/12FT single-output 300-W DC/DC converter provides 12 VDC at 25 A distributed via 5 individually-fused output terminals to ensure that failure on one load will not affect the entire system. The chassis-mount device accepts from 21 to 30 VDC

Socket Features POP Memory

July 2, 2008 11:18 am | Ironwood Electronics, Inc. | Comments

Including a 12-mm2 POP memory on top with a pitch of 0.500 mm and 23 × 23 array, Ironwood Electronic’s SG-BGA-7116 0.400-mm BGA IC socket measures 12 mm2, has a pitch of 0.500 mm, and 28 × 28 ball array in a Samsung 12-mm2 168-ball fine pitch ball grid array package. The device operates at bandwidths up to 40 GHz with insertion loss less than 1 dB and contact resistance

Advertisement

Connectors Target Removable Storage Applications

July 2, 2008 9:44 am | Comments

Working well in removable storage applications, FCI’s iVDR (information versatile disk for removable usage) connector contributes to standardizing data platforms in media cartridges, internal port terminations, and auto-loading mechanisms in host applications. The hard-disk or solid-state device provides a single row of 26

Oscilloscope Operates With 6 GHz of Bandwidth

July 2, 2008 7:37 am | Comments

Equipped with a 15.3 in, 16:9 display and a touch screen, the WavePro7 from Lecroy Corporation, is the first product series in the Zi Family of oscilloscopes. Operating with up to 6 GHz of bandwidth, the device can also be

Five Megapixel Camera Equipped With a Camera Link Interface

July 2, 2008 7:08 am | Comments

Offering thermal management and pre-processing for sensor operation, Sony's BM-599CL and BB-500CL, are two versions of a five megapixel camera that are equipped with a Camera Link interface. Both models are built around the Sony ICX625 2/3" CCD sensor (2448 x 2050 pixels - QSXGA) and are mid-range cameras. Potential applications for the cameras include:

Multi-Chip White LED Delivers up to 790 Lumens

July 2, 2008 5:39 am | Comments

With the same 7 x 9-mm footprint as its single-emitter predecessor, the multi-chip XLamp MC-E LED integrates four emitters to provide up to 790 lumens at 6,000K and up to 605 lumens at 3,000K with an input power of 9.8 W. The devices are available in color temperature ranges of 2,600K to 3,700K, 3,700K to 5,000K, or 5,000K to 10,000K.

Switching Supplies Meet EMC Requirements

July 1, 2008 11:32 am | Comments

Meeting EMC noise performance requirements, Astrodyne’s ECA30 Series encapsulated switching power supplies accepts universal input from 90 to 264 VAC and provides output power of 30 W with single, dual, and triple outputs from 5 to 48 VDC. The RoHS 2002/95/EC-compliant devices operate over an ambient temperature range from -10°C to 50°C. The UL/EN60950-1-specified

Advertisement

DSP Builder features Second-Generation Model-Based Synthesis Technology

July 1, 2008 10:34 am | Comments

Featuring second-generation model-based synthesis technology, the DSP Builder Version 8.0 fro Altera, increases productivity for DSP designs by an order of magnitude. This technology allows DSP designers to  generate timing-optimized RTL code based on Simulink design descriptions. With this Builder feature, designers can acquire

Dual-SMBus Microcontroller Supports 400 Kbps per Side

July 1, 2008 8:50 am | Comments

With two system management buses (SMBus), Silicon Storage Technology’s SST89C58RC FlashFlex 8-bit microcontroller family supports up to 400 Kbps data throughput in each bus. The 6-mm2 QFN-packaged devices yield operating voltages from 2.7 to 5.5 V and 1 KB on-chip RAM. The microcontrollers

MOSFET Driver Delivers 5A for DC/DC converters

July 1, 2008 8:23 am | 3M Electronics Solutions Division | Comments

 Designed to drive upper and lower power N-Channel MOSFETs in a synchronous converter, the LTC4447 from Linear Technology, can deliver 5A for buck or boost DC/DC converters. This driver, combined with power MOSFETs and one of Linear Technology's DC/DC controllers, forms a complete synchronous regulator that can be used as a step-down or step-up DC/DC converter. The device drives both

Power Supplies Offer Constant Current or Voltage

July 1, 2008 5:44 am | Comments

Housed in 1U-high aluminum cases and providing up to 450 W, the WL7 Series of switchmode power supplies from Acopian have a constant voltage/constant current crossover, and both voltage and current can be programmed with 0- to 10-V control voltages.

Connector Supports Hard Disk Drives

June 30, 2008 12:49 pm | Comments

Supporting 1.8” form factor drives, FCI’s Micro serial ATA (SATA) plug connector have compatibility with applications such as notebook PCs, set-top boxes, game consoles, audio/video, and portable storage. The SATA-IO-standardized device meets SFF 2.6 specification with 16 positions (7 with a pitch for signal of 1.27 mm and 7+2 positions with a pitch for power of 1.27 mm). The RoHS-compliant

Advertisement

FPGAs Provide System-On-Chip Functionality

June 30, 2008 11:54 am | Comments

Using flexiFLASH architecture, Lattice Semiconductor’s LatticeXP2 family of non-volatile automotive FPGAs provides look up tables from 5 to 17 K, 276 Kb on-chip embedded FlashBAK RAM in 18 Kb dual-port blocks, and from 0.6 to 2.2 Kb of Serial TAG memory. The 90-nm devices support DDR2 memory interfaces at 400 Mbps, ADC/DACs at up to 750 Mbps and 7:1 LVDS display interfaces at above 600 Mbps. The AEC-Q100-standardized FPGAs support up to 5 sysDSP

Reference Design Creates SFP Optical Modules

June 30, 2008 9:58 am | Comments

Incorporating the recently PHY1040 laser transceiver and limiting amplifier IC and an off-the shelf 8-bit microcontroller with embedded flash, a hardware and software reference design from Phyworks can create Small Form-factor Pluggable 125 Mbps to 1.25 Gbps optical modules with digital configuration and monitoring capability. The system architecture allows users to configure the PHY1040 in software to meet specific optics and network requirements and

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading