Non-locking Type A4 and self-locking Type LA4 fasteners from Penn Engineering provide load-bearing threads in stainless sheets as thin as .038”/0.97 mm while permitting up to .030”/0.76 mm total adjustment for mating hole misalignment. The fasteners are available in thread sizes range from #4-40 through #10-32 and M3 through M5 with hardness of HRB 88 on the Rockwell “B” scale. They are squeezed into properly sized holes using standard equipment.
Well-suited for applications where switcher noise can limit data throughput and cause failure in spectral compliance, the EP5368QI mA synchronous buck converter has an integrated inductor, PWM controller, MOSFETS, and compensation network to significantly simplify design, reduce the parts count, and provide for inherently low-noise operation. Requiring just 2 MLCC caps for a solution footprint of 22mm²
Using a custom heat sink enabling operation to 100W, the XG-LGA-7000 socket for 0.65 mm pitch LGA devices is designed for a 12 mm package size. With 50? per pin contact resistance and a current capacity of 5 amps per pin, the socket operates at bandwidths up to 40 GHz with less than 1dB of insertion loss and has a pin self-inductance of 0.11 nH, a mutual inductance of 0.028 nH, and capacitance to ground of 0.028 pF.
Converting AC into Class 2 DC power for LEDs, the SignLINQ power management system uses the MultiLINQ power splitter, enabling deployment remotely from the light fixture itself. Targeting solid-state lighting and digital signage applications, the UL48-rated system combines power splitter and control circuitry in an IP67 / NEMA weatherproof module.
Providing monitoring and activation functionality for chemical, petrochemical, and other manufacturing applications, the 48-bit USB-4751and 24-bit USB-4751L USB data acquisition modules support wet or dry contacts as inputs with software-programmable six/three 8-bit ports configurable as input or output. Features include an event counter and three 16-bit timers which can be cascaded to become a 32-bit timer.
Taiyo Yuden’s CKP2520 multilayer chip power inductors offer DC resistance from 0.08 ohms to 0.15 ohms and current ratings from 1.4A to 1.1A, improvements of 35 percent and 44 percent compared to the company's previous models. With an EIA 1008 case size footprint of 2.5 mm × 2.0 mm and a maximum height of 1.0 mm and inductance values from 1.0 µH to 4.7 µH, the devices are suitable for
Providing a Complete dsPIC Digital Signal Controller (DSC) Development System, the MPLAB Starter Kit for dsPIC DSCs (part # DM330011) comes with all required materials, including a USB-powered DSC board with integrated debugger and programmer, MPLAB-IDE and -C30 C complier software, and sample programs and hardware for speech and audio applications.
Combining the performance of an ARM926EJ core, a VFP, a LCD Controller, an Ethernet MAC, and USB, the NXP LPC3200 line of microcontrollers offer embedded designers the ability to reduce on-chip components and maximize power savings. Designed for flexibility in applications that require fast, simultaneous communications, the LPC3000 combines high-performance, low power consumption and a myriad of peripherals.
Providing a 4× increase in resolution over traditional 16-bit devices (equivalent to more than 5½ digits of resolution for DC measurements), the National Instruments USB-6281 and USB-6289 DAQ modules feature an 18-bit analog input and ADC with sampling rates up to 625 kS/s (500 kS/s when scanning). The devices deliver an accuracy of 980 µV at ±10 V and 28 µV at ±100 mV and come with NI-DAQmx driver software and LabVIEW SignalExpress LE, measurement workbench. With features including programmable range and offset, the USB-6281 offers 16 SE and 8 DI analog input channels, two analog output channels, and 24 DIO channels while the USB-6289 has 32 SE and 16 DI analog input channels, four analog output channels, and 48 DIO channels.
Targeting office automation, telecommunications, consumer and industrial applications, the Allegro A4930 single-phase brushless DC motor pre-driver provides outputs that can drive N-Channel MOSFET H-Bridges with voltage ranges from 8V to 36V. Motor speed is regulated by either PWM or external analog voltage with programmable minimum speed and maximum motor current. Synchronous rectification is employed in the PWM off-cycle to reduce power dissipation, and startup current can be ramped up for reduced supply current surges and lock detection along with auto restart functions to reduce damage due to motor overheating.
CSR’s MusiCore1 single-chip stereo audio processor with Bluetooth overcomes the limitations of a phone CPU in handling both audio and voice processing. It supports decoding of all mainstream music file formats including MP3, AAC, AAC+, WMA and SBC, and its DSP architecture reduces the power required to process audio files: 5.25 mW for an MP3 file, compared to
Allegro MicroSystems announced Hall-effect sensors that are fully programmable with low noise and a high bandwidth. The A1360/1/2 devices are suited for use in high frequency, current sensing applications due to the low noise (down to 8 mV (p-p)), flat temperature coefficient (0 percent/°C) and high bandwidth capability (typically 50 kHz). They come in a 1 mm thin, four-lead SIP (KT-package), which allows for
Targeting embedded applications requiring audio functionality, 28-pin and 44-pin dsPIC 16-bit DSCs incorporate a dual-channel, 100ksps, 16-bit audio DAC module as well as 16 kB RAM (2 Kbytes of dual-port RAM) with 64 kB and 128 kB flash optional in the dsPIC33 model. Features of the DSP-capable device include two analog comparators, selectable 10-bit or 12-bit ADC, and a
Offering fully adjustable outputs, the dual-channel LTC3524 BIAS and white-LED driver can generate up to 25mA at 6V for the AVDD channel, and up to 2mA at 20V and -20V for the respective VGH and VGL bias requirements with controlled power-up/power-down sequencing. Able to operate at up to 90 percent with voltages from 2.5V to 6V, the 4mm2 QFN-packaged synchronous rectification device can power up to 10 white LEDs (5 per channel) while offering a dimming ration of up to 200:1.
Creating a driver and liquid-lens system to add auto-focus capability to compact handheld imagers such as cellular phone and PDA cameras, a partnership between Supertex and Varioptic combines the Arctic Series of liquid lenses with the HV895 family of inductorless liquid lens driver ICs. The RoHS-compliant driver/lens system does not have moving parts, and features include