Product Releases
Subscribe to ECN Magazine Product Releases

Resistor Demonstrates Industrial-Grade Absolute TCR

October 17, 2008 12:32 pm | Comments

Having a 25°C ref., Vishay Intertechnology’s VPR221Z Z-Foil resistor provides an industrial-grade absolute TCR of ±0.050 ppm/°C from 0°C to 60°C and ±0.200 ppm/°C from -55°C to 125°C. The component exhibits a power rating up to 8 W at 25°C per MIL-PRF-39009 (1.500 W in free air), a typical power coefficient ("DeltaR due to self heating") of ±4 ppm/W, and a tolerance of ±0.010%. The unit presents a 1 ns rise time without ringing, a load-life stability of ±0.005% (50 ppm) for 2,000 hours at


Eye Pattern Analyzer Supports Multiple Systems

October 17, 2008 12:02 pm | Comments

Conducting measurements at data rates from 0.1 Gbps to 12.5 Gbps, Anritsu’s Bit Master MP1026 eye pattern analyzer demonstrates support for OC-192/STM-64 SONET/SDH, 10G Fibre Channel, and 10G Ethernet systems at the physical layer. The 315 mm × 211 mm × 78 mm 4 kg device verifies the performance of high-speed circuits, transceivers, transponders, and

Bonding System Attaches Multiple Parts

October 17, 2008 11:19 am | Comments

Offering a motorized X-axis table, Y-axis table, or XY axis table, Miyachi Unitek’s Unitek Eapro DT-500-PH desktop hot bar bonding system connects multiple parts in an array at one time, multiple flexes onto a PCB, or one flex to a PCB and a LCD. The tool uses a Uniflow2 power supply for selective hot bar soldering, heat sealing, and conductive adhesive applications. The instrument delivers


UPS Supplies 6 kVA

October 17, 2008 10:12 am | Comments

Meeting the needs of mission-critical computer networks and facilities’ digital operations, Eaton Corporation’s 9135 UPS delivers up to 6 kVA of clean double-conversion power. The device offers up to 97% efficiency in high efficiency mode, up to 91% accuracy in double conversion mode, and battery runtime of over an hour during an outage. The system includes 4 output receptacles, rear panel communications options for remove connectivity, and

Chip Resistors Exhibit High Power Dissipation

October 17, 2008 9:16 am | Comments

Coming in a 1225 chip size, TT electronics IRC’s SC-3 Series chip resistors function in a resistance range from 1 Ohm to 100 KOhm with power dissipation of 3 W at 70°C. The components offer a maximum voltage rating increase from 50 V to 100 V, absolute tolerances to ±1% with TCRs of ±100 ppm/°C, and operating temperatures from -55°C to 150°C. Applications include

Wall Plug-ins Operate Worldwide

October 17, 2008 8:07 am | Comments

Having double-enforced insulation mechanical configurations, GlobTek’s GT-81085 Series fixed blade wall plug-ins comply with North America/Japan, Europe, U.K., Korea and Australia/NZ re Class II and IEC 60950 requirements, EMI/RFI regulations, EMC directives/CE, and FCC Class B for ITE applications. The instruments offer regulated output voltages from

Production System Creates Wax Patterns

October 17, 2008 7:10 am | Comments

Designed for high-volume production, 3D Systems’ ProJet CPX 3000 3-D production system makes 100% RealWax patterns from digital data for direct investment casting applications using standard investment materials and casting procedures. The printer uses Multi-Jet Modeling (MJM) technology combined with VisiJet CPX200 wax build material and VisiJet S200 dissolvable wax support material. The device offers a HD build mode and a XHD build mode, which


Processor PMC Targets LpDAS Apps

October 17, 2008 6:12 am | Comments

Offering a MPC5200B CPU at 396 MHz, AcQ Inducom’s PrPMC520 conduction-cooled processor PC works in low power data acquisition systems (LpDAS). The component stores 256 MB SDRAM max and 32 MB Flash memory max., and has 64 Kb


Rocker Switches Display High Current Ratings

October 17, 2008 5:07 am | Comments

Using silver alloy contacts, Cherry Electrical Products’ KC and KD Series round water-resistant rocker switches achieve current ratings of 20 A at 14 VDC and 16 A at 125 VAC. The IP56-standardized devices include a silicone rubber actuator, lighted and non-lighted designs, and snap-fit mounting to fit an industry-standard panel cut-out of 20.2 mm diameter. The UL-approved (on AC loads) units come with 4.8 mm quick-connect tabs, and suit outdoor power equipment, commercial


Analog Switch Exhibits Negative Signal Capability

October 16, 2008 12:23 pm | Comments

Operating in audio applications, austriamicrosystems’ AS1747 dual SPDT analog signal switch presents a negative signal capability to allow designs without AC coupling capacitance. The IC shows on-resistance of 0.40 Ohm, channel-to-channel matching of <0.03 Ohm, on-resistance flatness of 0.25 Ohm, and total harmonic distortion (THD+N) of 0.01%. The 10-pin 3 mm² TDFN-packaged

Gate Drive Transformer Offers High Pulse Rating

October 16, 2008 11:41 am | Comments

Providing pulse control in gate drive circuits used in MOSFETs and IGBTs for electronic equipment such as switch mode power supplies, Datatronic Distribution’s SM580 SMT gate drive transformer exhibits a typical pulse rating of 21 V/µs. The 6.60 mm × 8.38 mm × 4.31 mm (0.26” × 0.33” × 0.17”) unit offers hi-pot rating of up to 1,500 VDC, a DCR of 2.8 O, a flat top, and

Displays Connect to Four Load Cells

October 16, 2008 11:02 am | Comments

Incorporating display and controller functions in one instrument, Loadstar Sensor’s DS-3000 family 4-channel displays accept input from up to 4 iLoad Series load cells. The devices automatically sum loads from all connected cells, and show individual cell readings. The LED display shows 0.56” digits in resolutions from 0.01 to 999.90 in kilogram, pound, or

SIM Card Connector Series Has Low Profile

October 16, 2008 10:15 am | Avx Corporation | Comments

Reducing the overall installed height of the SIM card to less than 1.70 mm, three additions to the 9162 family of SIM card connectors from AVX Corporation give a profile from the PCB to the underside of the card of just 0.70 mm. Providing the user with the ability to locate, align and lock the SIM card in place, the lockable 9162 Connector


VCO Features Wide Voltage Range

October 16, 2008 10:02 am | Comments

Operating from 3366 MHz to 3597 MHz, with a control voltage range of 0.1 V to 16 V, the CVCO55CC-3366-3597 VCO (Voltage Controlled Oscillator) from Crystek features a typical phase noise of -106 dBc/Hz @ 10 KHz offset. Output power is typically +5.0 dBm. Input voltage is 8 V, with a max current consumption of 40 mA. Pulling and Pushing are minimized to 3.00 MHz and 0.50 MHz/V

Connectors and Headers Perform in Multiple Apps

October 16, 2008 9:17 am | Comments

Targeting high-volume applications, 3M’s 95x Series board-to-board stacking connectors and box headers function in industrial control units, home appliances, handheld test and measurement devices, and computing market segments. The 10 µ” gold devices comply with requirements for IEC Performance Class 3 items and RoHS regulations from the EU and


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.