SRAM Opto Semiconductors introduced its advanced fine binning for white LEDs that delivers improvements in off-angle color uniformity as well as a typical color rendering index (CRI) of 80+. This advanced binning process for white LEDs corresponds to a 3-step McAdams ellipse, and it is available for Power TOPLED, Advanced Power TOPLED and the proprietary DRAGON family of products. Applications such as backlighting of diffused surfaces and linear array applications benefit from the uniform light enabled by this technology which is fully ANSI/Energy Star-compliant in the United States.
Phoenix Display International (PDI), Inc. introduced its line of 5.7" monochrome QVGA modules that are available in FSTN/gray/positive/transflective or STN/blue/negative/transmissive configurations. These graphic modules (PN G-320240-5.7) allow the user to control each pixel individually to display both text and graphics simultaneously. With a variety of options available, the monochrome graphic displays are modular in design, and they can be customized to fit specific applications. Both the STN and FSTN models are available with an RA8803 controller with built-in touchscreen controller, and they can be configured with either a CCFL or LED backlight.
Featuring high purity ceramic dielectrics, the SGNM series of high voltage nonmagnetic variable capacitors from Sprague-Goodman Electronics can be sealed to 40 lbf/in2 (276 kPa), or used for cryogenic applications as low as 4K. DC working voltage ranges from 1.5 kV up to 7.5 kV (DC withstanding voltage from 3 kV to 15 kV). Capacitance ranges start with 1 – 10 pF, and increase (in 5 pF increments) to 10-180 pF. The capacitors
Macroblock's MBI5039, aimed at LED panel applications, offers real-time error detection of the full LED panel, helps designers to detect dark pixel errors. This 16-channel constant current LED driver supports constant output current from 3 mA to 90 mA and sustains up to 17V at the output ports. The clock frequency
Allegro Microsystems, Inc. announced its series of white multi-chip LEDs that provide a range of high-powered InGaN white LEDs that can be used in general lighting applications, amusement and gaming equipment, and for backlighting TFT displays. Each module combines either six or eight LEDs in one to four separate channels. Modular design allows the SEPW devices to be assembled into string arrays by connecting the modules in a series.
Low cost DC gearmotors for OEM applications are available from Source Engineering, Inc. These 12 mm to 50 mm DC gearmotors are available with cut steel gears for high strength applications, plastic gears for low noise requirements, and low cost, powered metal. Available in ratios from 5:1 up to 3000:1, these low cost DC Brush type gearmotors are appropriate for pick-and-place, medical testing equipment, robotics, toys and games, valve and door actuation, ROV (Remotely Operated Vehicle) fin and steering actuators, appliances, manufacturing, security applications, and assembly operations. The inline and offset output shafts of the gearmotors can be custom machined with cross holes, splines, keyways, and flats, or end drilled and tapped.
Cherokee International announced its 2,500W CAR2512 front end intended for low profile, 12V distributed power architecture applications such as high-performance enterprise and service-provider switches and routers, mid- to high-end servers and storage equipment.
AMETEK Technical and Industrial Products introduced the PITTMAN Series 9000 brush-commutated DC motors that deliver quiet and smooth operation for equipment used in data storage, medical/biotech, semiconductor processing and automation applications. Their modular construction promotes customization to satisfy specific requirements. These motors, with 2-pole stators, incorporate 7-slot skewed armatures to minimize magnetic cogging (or reluctance torque), and they enable smooth and quiet running performance. Commutators are diamond-turned after armature assembly to ensure optimum concentricity and long brush life. Windings are resin-impregnated for greater reliability in incremental motion applications. Standard features include ceramic magnets, silicon steel laminations, copper graphite brushes and heavy-gauge steel housing. Speed, voltage, current and torque characteristics can be varied to meet application demands.
Phoenix Contact introduced its family of electronic timer relays (ETDs) that offer a range of timing settings and other practical functions. Featuring easy set-up and diagnostics, the ETDs are appropriate for use in universal applications. They monitor different time functions without using complicated controllers. The timer relays can be adjusted to an array of timing settings ranging from milliseconds through several days. ETD devices equipped with special functions, including star/delta (or Wye/Delta) and watchdog, are also available.
Fully compliant with the IEEE802.3af power-over-Ethernet (PoE) standard for detection, disconnect, and voltage control, the POE125U 8-port midspan from Phihong enables remote monitoring for single points of backup in applications such as small office environments, wireless access points, and IP cameras for security applications. The SNMP-capable Gigabit-compatible 8.9" × 7.8" × 1.75" device provides up to 15.4W of power per port
Suitable for use in handheld electronics, Omron Electronic Components RoHS compliant XB4A (plug) and XB4B (socket) series of 0.4 mm (0.016”) pitch SMD board to FPC plug and socket connectors have a stacking height of 0.9 mm (0.035”) and a width of 4.1 mm (0.161”) or 5.0 mm (0.20”), including the solder terminals, when mated. Their high reliability double contact point gold plated contacts are resistant to improper contact alignment and
Provided in both SMT and through-hole configurations, the LVB-4203 MIL-STD-1553 data bus transformer from Beta Transformer Technology is intended for use with 3.3V transceivers in military and other high-reliability applications. The transformer has a low profile of 0.130” height with a 0.625” × 0.625” footprint.
A snap-in fit for a 20 mm panel hole, Phaseda’s single-pole RL3-5 round rocker switch is configurable as a SPST or SPDT device and the double-pole RL3-4R rocker switch offers DPST functionality. The switches can handle a UL-approved 16A or 1/3HP at 125V AC for high power and motor applications, and 10A at 125V AC for small appliances and normal usage with cUL and VDE approvals, and are RoHS compliant.
Well-suited for control and calibration applications such as digital volume control and display adjustment applications in portable, consumer, and industrial electronic products, the CAT5128 digital potentiometer IC from Catalyst Semiconductor is a volatile, single-pot device with up/down control to provide a simple digital interface. Housed in an 8-lead SOT-23 package, the device powers on at the midscale setting and provides a 32-position linear taper
Electroswitch announced its Series 24 serial control switch relay (SCSR) that facilitates remote control and monitoring of circuit breakers while retaining local control through a manual trip/close handle. An addressable network device with certified DNP 3.0, the SCSR combines the functions of various other devices and provides remote trip-coil monitoring (single or dual), sequence-of-events reporting, system battery monitoring and self-diagnostic reporting. The SCSR’s color LEDs indicate breaker position (also indicated with a built-in mechanical target flag), breaker-trip-coil integrity, serial-bus transmission/reception and local/remote mode.