Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Flexible waveguide components suited for satellite applications

February 12, 2015 4:39 pm | by ATW Companies | Comments

ATW Companies Inc. announces that its flexible waveguide and waveguide components, available to the international market, are ideally suited for satellite applications and other airborne and space systems. Products include seamless flexible waveguide, flexible twistable ...

TOPICS:

Cost-effective cooling for high-power LED lighting

February 12, 2015 4:35 pm | by Glaciallight | Comments

A new series of 100W-200W stamped heatsinks from Glaciallight is designed for flood lights and other high-wattage LED lighting applications. Three wattage ratings are offered - 100W, 150W and 200W and heat pipes are available to help dissipate heat from high power CoB LEDs....

TOPICS:

Transceiver ICs help protect mobile network infrastructures

February 12, 2015 4:11 pm | by Vitesse Semiconductor | Comments

Vitesse Semiconductor Corporation unveiled the newest additions to its 10 Gigabit Ethernet (GE) PHY portfolio, the VSC8256, VSC8257, and VSC8258 quad-channel 10/40G physical layer transceiver family enabling government-grade, FIPS-197-certified 256-bit MACsec ...

TOPICS:
Advertisement

Multiple-output regulator intended for automotive LCD displays

February 12, 2015 2:57 pm | by Allegro MicroSystems, LLC | Comments

Allegro MicroSystems, LLC announces a new AEC-Q100 qualified, multiple-output regulator for powering automotive LCD displays. Allegro’s A8603 operates with fixed switching frequency that can be either programmed or synchronized with an external clock signal between 350 kHz and 2.25 MHz....

TOPICS:

Convection-cooled power supply achieves typical efficiency of 92%

February 12, 2015 2:13 pm | by Excelsys Technologies Ltd | Excelsys Technologies Ltd | Comments

Excelsys Technologies announces the XS500 series of high-efficiency, 500W convection-cooled AC/DC power supplies. With typical efficiency of 92%, and operating from 90-264VAC, the XS500 delivers 500W of output power without the need for forced-air cooling. Combining low-energy-loss ...

TOPICS:

Modular electronic loads feature current ratings of 60 A

February 12, 2015 1:33 pm | by Intepro Systems | Intepro Systems | Comments

INTEPRO Systems announces the introduction of its new line of 1800 W modular electronic loads. The ML1800 Series features an 8-inch TFT LCD color display with multiple language selection that is visible from across the room. The 6-slot chassis can be specified with up to six 300 W or three 600 W modules....

TOPICS:

MTi sets new industry standard for MEMS-based AHRS, VRU, and IMUs

February 12, 2015 1:04 pm | by Newark | Newark | Comments

The MTi product portfolio from Xsens provides a reliable industry standard for MEMS attitude and heating reference systems. The 4th generation MTi sets the new industry standard for reliable MEMS based AHRS, VRU, and IMUs. The MTi 10-series gives the system integrator a choice of three different integration levels....

TOPICS:

Voltage detectors feature delay function and sense pin

February 11, 2015 4:29 pm | by Torex Semiconductor Ltd. | Comments

The Torex XC6132, XC6133 and XC6134 families are voltage detectors with delay function and sense pin isolated external hysteresis adjustment. The sense pin is isolated from the power input pin to enable monitoring of the voltage of another power supply. Output can be maintained in ...

TOPICS:
Advertisement

Motor Drive Analyzers include high bandwidth of 1 GHz

February 11, 2015 4:17 pm | by Teledyne LeCroy | Teledyne LeCroy | Comments

Teledyne LeCroy announces the MDA800 Series of Motor Drive Analyzers (MDAs) that combine three-phase power analyzer static (steady-state) calculations, unique dynamic three-phase power and mechanical motor analysis capabilities, and high bandwidth (1 GHz) embedded control system ...

TOPICS:

Neutral ground resistors designed for industrial power systems

February 11, 2015 4:16 pm | by Vishay Intertechnology | Vishay Intertechnology | Comments

Vishay Intertechnology, Inc. has introduced a new series of neutral ground resistors for industrial power systems. Consisting of the company’s GRE1 high-power, high-current grid resistors mounted in rugged, weatherproof IP23-rated enclosures with extremely high voltage insulation ...

TOPICS:

High-power laser bars display unique brilliance

February 11, 2015 4:13 pm | by Osram Opto Semiconductors | Osram Opto Semiconductors | Comments

The new SPL BF98-40-5 laser bar from Osram Opto Semiconductors considerably reduces the complexity of coupling light into fibers and diodes or fiber laser systems for material processing can be made simpler and more cost-effective. Even at its maximum output of more than 60 watts ...

TOPICS:

Micro-coaxial assemblies designed for ultrasound applications

February 10, 2015 3:07 pm | by High Speed Interconnects | Comments

High Speed Interconnects (“HSI”) has recently announced custom, fine-wire and fine-pitch diagnostic imaging assemblies for medical device OEMs producing next-generation ultrasound equipment. HSI’s proprietary extrusion capabilities produce fine-wire coaxial cables ranging ...

TOPICS:

Power supplies conform to the IEC60601-1 3rd edition medical standard

February 10, 2015 1:41 pm | by TDK-Lambda Americas, Inc. | TDK-Lambda Americas, Inc. | Comments

TDK Corporation announces the introduction of TDK-Lambda’s ZMS100 2 x 4” medical and ITE certified power supplies. Designed to provide long field life in hospital, clinical, dental, and home-based medical applications as well as professional broadcast, test, measurement ...

TOPICS:
Advertisement

DC-DC converters provide up to 3.6 amperes DC output current

February 10, 2015 1:03 pm | by Ge Energy | Ge Energy | Comments

GE's new ERCW003A6R 100-watt, one-eighth brick DC-DC converters, the latest addition to its Orca-series family of isolated, board-mounted power amplifier modules. The new high-efficiency converters provide high-voltage and high-power applications with up to ...

TOPICS:

DC/DC converter offers 360 watts of output power

February 9, 2015 3:11 pm | by Calex Mfg | Calex Mfg | Comments

Calex Mfg. Co., Inc. of Concord California announces the introduction of the wide input range MTW series. The MTW offers 360 watts of output power in a standard ½ brick case. Available output voltages are 12, 15, 24 and 28VDC. The input range for all models is 9 to 36VDC with ...

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading