Advertisement
Product Releases
Advertisement

Integrated Relay Driver Optimizes Inductive Load Control

Mon, 03/12/2012 - 6:31am
relay driver By integrating a complete solid-state relay driver into a single, surface-mount package, DRDC3105 from Diodes Incorporated is said to minimize the PCB footprint, reduce the component count and improve the reliability of inductive load control circuits. Providing a rugged interface between standard logic and 3-V to 6-VDC inductive loads, the relay driver is designed to handle relays, solenoids, incandescent lamps and small motors in a wide range of applications. From a 5-V supply rail, driver has the capability to drive coils rated at up to 2.5 W. The relay driver is offered in single and dual driver configurations, housed respectively in SOT23 and SOT26 packages, and can replace between three and discrete components, according to the company. With a Zener diode included across the device’s bipolar transistor output, the need for an external free-wheeling diode is removed, and by clamping at 6.6 V the Zener also sinks inductive currents to ground, thereby reducing noise due to EMI.

Integrating robust pre-biased transistor technology delivering high transient isolation between input and output, DRDC3105 will protect sensitive input circuitry and guarantee to put its output into a safe off-state condition when the input is lost or disconnected. The bipolar’s low saturation characteristic means the device will drive current up to 0.5A through the coil when on and achieve near-zero current consumption in the off-state.

In 10k quantities, the DRDC3105 relay driver is priced at $0.09 USD each for the single driver package and $0.15 USD each for the dual driver package.

Diodes Incorporated
805-446-4800, www.diodes.com
Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading