Reducing Power Supply Component Count by 30%, Power Integrations' LinkSwitch II Series AC/DC switched-mode power conversion ICs eliminate the need for optocouplers and all secondary-side CV/CC control circuitry as well as all control-loop compensation circuitry. Integrating all control and protection circuitry plus a 700-V MOSFET in an 8-pin package, the devices have a CV output tolerance of ±5% and
Having a 13-bit (8192-count) per turn resolution, BEI Industrial Encoders’ Model L18 absolute encoder contains ASIC electronics, sealed bearings, and BEI’s code disk. The optically-based device comes in a 1.8” servo package in all-metal housing. The encoder is well suited for semiconductor fabrication
Yielding 1.0 A from a 2.5-V input using 3 external components, Maxim Integrated Product’s MAX8815A step-up DC/DC converter provides adjustable output from 3.3 V to 5.0 V or preset output of 5.0 V with an input ranging from 1.2 to 5.5 V. The 3-mm² 10-pin TDFN-packaged device has quiescent
Provided in a CLCC-2 flat SMT ceramic package 0.7-mm thick, the VLMW82 Series of white LEDs from Vishay have a thermal resistance of 20°C/W and an optical power output from 9,000 to 18,000 mcd. Offering a service life of approximately 50,000 hours, the InGaN devices have a 3.3 x 3.4 mm footprint and are optimized for display backlighting and other illumination applications.
Providing a simultaneous-sampling measurement system for demanding signal acquisition applications, two multi-channel, 16-bit, delta-sigma analog-to-digital converters (ADCs) from Texas Instruments operate with a 25-kHz bandwidth, a 2 µV/C offset drift and a SNR of up to 97 dB. The ADS1174 (4-channel) and ADS1178 (8-channel) ADCs have operating modes that allow for optimization of speed (52 kS/s) or power dissipation (7 mW/channel).
Providing a fixed amount of phase shift for adjusting coaxial cable electrical length, Narda Microwave-East’s Model 4572B phase trimmer provides phase adjustment of ±2° between 3 and 18 GHz. The 19-g
Delivering high pull strength, the B12 and B13 from Wilcoxon Research, are two magnet bases for developed for accelerometers. The B12 Model is a two-pole magnet base with a 7/8" (22 mm) diameter and 20 lbs. of force. The B13 Model is a two-pole magnet base with a 1" (25 mm)
Suitable for Japanese domestic white goods applications, the 388 Series of METI B-complaint fuses from Littlefuse, supports OEMs with a fuse package solution in both primary and secondary protection. These RoHS-compliant/lead-free fuses are also intended for, air conditioners,
Offering 60 mO impedance at 100 KHz, Vishay Intertechnology’s 150 CRZ Series SMT aluminum capacitors exhibit ripple current of 1,007 mA at 105°C and capacitance from 33 to 2200 µF over a voltage range from 6.3 to 63 V. The RoHS-compliant devices come in 5 case sizes ranging from 8 × 8 × 10 mm to
Yielding a typical flux of 90 lumens (113 lm max) at 250 mA, Toshiba America Electronic Components’ TL12W02-D white LED has a typical chromaticity of 0.32 (Cx) and 0.31 (Cy). The 10.50 × 5 × 2.10-mm SMT-packaged device has a forward current of 300 mA max and a forward voltage of 6.8 V
Offering seven frequency ranges, the Heptaband External Wireless Antenna from Laird Technologies, exhibits radio transmissions while supporting seven bands in one profile. The antenna bands operate simultaneously, providing operation across
Illuminated single pole rocker switches, developed by C&K Components, feature a snap-in round body along with a variety of actuator styles. The rocker switches are available in black, white and red opaque color combinations. Electrical functionality is SPDT/On-On or SPST/On-Off. The Series fit a
Having a minimum common mode noise rejection rating of 20 kV/µs, Fairchild Semiconductor’s FOD07xx Series logic gate optocouplers provide bandwidth yielding 25 Mbps. The J-STD-020- and UL1577-standardized devices consist of a high-speed AiGaAs LED driven by a CMOS IC and utilize lead-free (Pb-free) terminals. The RoHS-compliant optocouplers have
Targeting space-constrained systems in networking, industrial, and other applications, the RP-30 Series of 30-W DC/DC converters from RECOM have a 2" × 1" footprint and a power density of 2.28 W/cm³. The shielded and potted devices are available in versions with 2:1 inputs of 9 to 18 V, 18 to 36 V and 36 to 75 V as well as 4:1 input ranges from
NEC Electronics introduced 22 new 16-bit All Flash microcontrollers (MCUs) for compact, low-power, battery-operated and sensor-enabled systems. Based on the company’s 16-bit 78K0R CPU core, the 78K0R/Kx3-L MCUs offer low power consumption to extend battery life, and additional on-chip integration to help reduce the size and cost of battery-driven and sensor-enabled systems. The lineup also offers