Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Oscilloscope Series Features Next Generation Chipset, High Data Transfer Rates

October 8, 2008 11:41 am | Comments

LeCroy introduced WavePro 7, the first product series in the Zi Family of oscilloscopes. It represents the first deployment of the company’s next-generation chipset and latest streaming architecture, X-Stream II. This oscilloscope offers complete debug with up to 6 GHz of bandwidth available. The WavePro 7’s design incorporates a 15.3", 16:9 HD display with a touchscreen. The company asserts the scope can solve electronic design problems within

LED Lamp Consumes Under 8 mA

October 8, 2008 11:19 am | Comments

Designed to replace 120 MB incandescent bulbs, DDP’s 120MBLS-X-CX 120 VAC line voltage wide-angle LED lamp draws <8 mA of power (85% lower than incandescent 120 MB bulbs) while operating at 130 VAC. The light utilizes a shunt resistor to eliminate transient current, and prevent a false positive indication by the LED. The lamp suits indicator applications, and

Real-Time Spectrum Analyzers Show Live RF

October 8, 2008 11:06 am | Tektronix | Comments

Tektronix, Inc. announced the addition of DPX waveform image processor technology to the mid-range RSA3000B Series Real-Time Spectrum Analyzers. This provides a live RF view of the spectrum using the RSA3300B and RSA3408B family models, enabling desirable RF signal discovery capability for a broad range of digital RF applications including

Advertisement

Analog Transducer/Sensor Meters Feature Small Size, Integrated Diagnostics for Input and Output

October 8, 2008 10:58 am | Comments

Transducers Direct created a small, programmable meter for analog sensors/transducers with integrated diagnostics for both input and output. The TDRO-10 meter features two-button English programming and a 67 msec. update rate. It measures 3.78" × 1.89" × 1" depth, fitting into a standard 1/8 DIN cutout. The meter provides six-digit LED display with

Touch Sensing Device Enables Button and Slider Replacement in Any System

October 8, 2008 10:39 am | Comments

Cypress Semiconductor introduced the CapSense Express capacitive touch sensing device for button and slider replacement. The device enables designers to implement up to 10 buttons and/or sliders in as little as five minutes  with no coding. The PSoC Express visual embedded system design tool and CapSense Express configuration tool allow designers to

CMOS and Rejustor Based Application-Specific Analog Signal Conditioning Chip

October 8, 2008 10:30 am | Comments

Microbridge Technologies introduced the MBSTC-02 CMOS device active analog circuit which incorporates the company’s passive, Rejustor polysilicon adjustable resistor technology. The signal conditioning chip allows sensor calibration and temperature compensation after final assembly, which negates cumulative errors associated with the assembly processes such as

Flex Jumpers Include Edge Card Connectors

October 8, 2008 10:17 am | Comments

Coming in vertical, horizontal, or edge mount designs on a 0.8 mm pitch, Samtec’s HSF8 Series rugged high-speed flex jumpers offer a choice of mating micro edge card connectors. The components come in standard lengths of 5” and 10”. The jumpers include 14 and 32 differential pairs (7 and 16 signal pairs per side (-DP)), and 20 and 50 signal single-ended pins (10 and

DC/DC Converter Modules Contain a Digital Control Platform

October 8, 2008 10:06 am | Ericsson Power Modules | Comments

With 96 percent efficiency, BMR453 DC/DC converter modules from Ericsson Power Modules offer up to 400 W output power or up to 33 A with ±2 percent accuracy. Its input voltage range is 36 V to 75 V, and its output voltage is variable from 8.5 V to 13.5 V. Application areas for the BMR453 series are systems that must use a telecom input voltage with battery backup or both

Advertisement

PoE 24-port Midspan Provides 38.5 W Over Network Infrastructure

October 8, 2008 9:58 am | Comments

GlobTek's GT-91093-HPOE Power over Ethernet Midspan family offers remote powering of Wireless LAN access points, voice over IP phones, security cameras, RFID readers and other IP terminals up to 38.5 W over existing network infrastructure. The Midspan can be configured to 15.4 W of power per port over two pairs in compliance with IEEE 802.3af standard or to 38.5 W over four

Isolated 2W Single Output DC/DC Converter Offers 89 Percent Typical Efficiency

October 8, 2008 9:48 am | Murata Power Solutions Inc. | Comments

The NMK series of isolated 2 W single output DC/DC converters from Murata Power Solutions comes in a small footprint, pin compatible, industry standard SIP package that allows easy drop-in replacement of other devices. The seris also provides a straightforward power upgrade path from the company’s existing 1 W NMV Series. Comprising eight models, the un-regulated

Patch Antenna Receives/Transmits Two Different Frequency Bands in a Single Element

October 8, 2008 9:40 am | Comments

Spectrum Control designed a single element patch antenna that can receive and/or transmit two frequency bands in one 45 mm package, offering a space and cost savings compared to using two, single frequency patch antennas. These patch antennas were developed for GPS (global positioning systems) using either Globalstar: telephone and low-speed data communications or Iridium: worldwide voice and data communications using handheld

Clamp Filters for Electromagnetic Noise Countermeasures in Automotive Applications

October 8, 2008 9:29 am | Comments

TDK Corporation announced the development and mass production of its ZCAT08V-BK and ZCAT12V-BK automotive clamp filters for use as a countermeasure against the effects of electromagnetic noise on the cables that link the various onboard electronic control units that are used applications such as antilock braking systems and electric power

Brush DC Motors Offer High Efficiency

October 8, 2008 9:21 am | Comments

Using an optimized coil design, Portescap’s Athlonix brush DC motors exhibit a maximum energy efficiency of 91% at 9.2 W output power. The RoHS-compliant devices demonstrate maximum continuous torque up to 16.5 mNm and angular acceleration in medical pumps, secure door locks, watch winding mechanisms and robotics. The motors suit automation

TOPICS:
Advertisement

Language Capability Allows Textual Authoring

October 8, 2008 8:27 am | Comments

Based on the MATLAB language, The MathWorks’ Simscape language capability enables textual authoring of physical modeling components, domains, and libraries in the Simulink environment. Simscape extends Simulink for modeling and simulating mechatronic and other multidomain physical systems using a physical network, or acausal modeling approach. The capability

Optocouplers Incorporate Wide Operating Temperature Range, Tight CTR Binning, High Isolation Voltage and High BVceo

October 8, 2008 7:57 am | Comments

Everlight Electronics introduced four-pin SSOP phototransistor optocouplers combining key specifications important to power supply designers. These include a low-profile (2 mm) package, high isolation voltage (3,750 Vrms), minimum creepage distance (5 mm), wide operating temperature range (-55°C to +110°C), multiple current-transfer-ratio (CTR) bins and

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading