Protecting against the possibility of surface damage caused by arcing via surface platings, FCI’s Apex 950 and RCS-800 families of connectors target electric vehicles (EV) and hybrid electric vehicles (HEV). The Apex 950 interconnects reach a current carrying capacity up to 150 A, and the RCS-800 terminals contain an 8-mm round-pin design that is said to
Presenting an IRIG-B time synchronization input, Data Device Corporation’s BU-65590I multi-I/O PCI card provides up to 4 dual-redundant MIL-STD-1553 channels, 16 ARINC 429 receive channels, 4 ARINC 429 transmit channels, 6 user-programmable digital discrete I/Os, 2 RS-232 serial I/O channels, and 2 RS-422/485 serial I/O channels. The component includes a combined RT/Monitor mode to monitor all 1553 communications on the bus, including
Integrating into the 2800 and 2900 Series, Keithley Instruments’ SignalMeister 3.0 RF communications toolkit provides RF signal generation and RF signal analysis of single-input single-output (SISO) and multiple-input multiple-output (MIMO) signals. The program contains built-in libraries for mobile communications protocols (3GPP and 3GPP2 standards), including WCDMA, HSPDA, HSUPA, cdmaOne, cdma2000, and 1xEV-DV. The software also has
Adding to the PLCC-4 Series, Avago Technologies’ ASMT-QxBB Series 0.5-W SMT LEDs display a viewing angle of 120° in automotive and electronic sign applications. The RoHS-compliant components exhibit mid-power intensity brightness with optimum flux performance using InGaN chip technology, as well as optical efficiencies of 48 lm/W (cool white) and 43 lm/W (warm white). The Pb-free devices demonstrate a junction temperature of 125°C, thermal resistance of
Targeting applications requiring +/-5% voltage accuracy, the LinkSwitch-CV Series of AC/DC switched-mode power conversion ICs simplify the design of CV converters by eliminating all secondary-side CV and control-loop compensation circuitry. The family includes the LNK626PG, presented as the world’s highest-power accurate constant voltage (CV) integrated switcher IC with primary-side control.
Combining stacked capacitors and multilayer varistors, AVX’s CapGuard transient voltage suppressor (TVS) demonstrates broadband off-state EMI filtering and bi-directional transient clamping. The component offers energy ratings of 1.2 joules and 1.5 joules, parallel capacitance values from 10 nF to 33 nF, and operating temperatures from -55°C to 125°C. The product exhibits working voltages of 18 VDC, 26 VDC, 30 VDC, and 48 VDC, and
Offering a tuning voltage range from 0.50 VDC to 4.50 VDC, Z-Communications' V804ME14-LF S-band VCO performs from 2,300 MHz to 2,450 MHz in broadcast system applications. The RoHS-compliant unit exhibits a typical phase noise of -99 dBc/Hz at 10-KHz offset, a typical tuning sensitivity of 52 MHz/V, and typical second harmonic suppression of -20 dBc. The 0.50" × 0.50" × 0.13" MINI-packaged oscillator shows typical output power of
Enabling implementation of motion and navigation control in a broader range of applications, including medical instrumentation, the iSensor family of inertial sensors from Analog Devices has added the ADIS16405 six-degrees-of-freedom (6DoF) inertial measurement unit (IMU) and the ADIS16300 four-degrees-of-freedom (4DoF) IMU.
Operating from a 36-Vdc to 75-Vdc input, the 300-W FPQR48T01225 regulated quarter brick converter from FDK provides a 12-Vdc output at up to 25 A. With an efficiency in excess of 92.5%, the 2.28" x 1.45" x 0.555” device includes features such as input under-voltage lockout (UVLO), output over-current protection (OCP), output over-voltage protection
Featuring twist-pin contacts, Commercial off-the-Shelf (COTS) hermetic Micro-D connectors from Cinch Connectors use epoxy-resin sealing technology to achieve a hermeticity of 1 X 10-8 cc/sec @1 ATM in Helium, and exceed Mil-prf-83513. Available in standard configurations from nine pins to 100 pins, the connectors' construction includes gold-plated copper-alloy contacts, aluminum shell
Offering a typical full-load efficiency of 90%, SL Power Electronics’ Condor MINT1065 single-output power supplies perform in medical applications, such as diagnostic and respiratory care equipment and continuous positive airway pressure (CPAP) devices and monitors. The 2” × 4” × 1.02” instruments offer five models from 12 V to 48 V, a universal
Measuring 1.9” × 1.4” × 2” (48 mm × 36 mm × 52 mm), Intelligent Motion Systems’ MDrive14Plus Microstepping and MDrive14Plus Half/Full Step NEMA size 14 brushless stepping motors exhibiting micro, half, of full stepping options. The MDrive14Plus Microstepping presents full 256 × 200 microstepping, a 12- to 48-VDC supply input, internal magnetic or
Weighing 5 lbs (11 kg), Technisys’ PN701363 STM-1 and PDH recorder performs in a 1.7” H × 8.5” W × 13.5” D (4.3 cm × 21.6 cm × 30.5 cm) aluminum-enclosed package. The instrument accepts STM-1 (155 Mbps) optical through E1 electrical data streams, including all sub-channel rates between, and consumes <50 W of power. The device offers an
Suiting VSAT, military and space, fiber optics, sensor, and test instrumentation applications, Hittite Microwave’s HMC451LP3E and HMC-ABH264 GaAs PHEMT MMIC amplifiers work in point-to-point and point-to-multipoint radios. The RoHS-compliant HMC451LP3E operates from 5 GHz to 18 GHz with 18-dB gain, 21-dBm saturated output power at 18% PAE, and 28-dBm output IP3 in a temperature range from -40°C to 85°C. The HMC-ABH264 performs from
Exhibiting plastic housing and a lack of internal resins, Premo EMC’s DRTF family of three-phase filters are available to assembly on a DIN rail. The UL1283- and EN60939-approved devices perform without neutral for currents of 20 A, 30 A, and 50 A. The products are appropriate for automation machinery, electro-medical equipment, frequency inverters, servo