Product Releases
Subscribe to ECN Magazine Product Releases

Filters Cut Cellular Noise in Music Phones

January 13, 2009 4:45 am | Stmicroelectronics | Comments

Occupying 0.89 mm × 1.26 mm of handset PC-board space, STMicroelectronics’ EMIF02-SPK02F2 audo EMI filters target the built-in speaker or stereo headset output found in music phones. A single component can be connected to the microphone input to isolate the handset from external sources of noise, such as other cell phones. The devices use a double-clamping structure to clamp an ESD spike to 12 V for meeting

Anemometers Show Air Velocity and Temperature Simultaneously

January 13, 2009 4:29 am | Comments

Using a LCD display with digital readability, Omega Engineering’s Series HHF42 portable hot-wire anemometers read air velocity and temperature simultaneously. The CE-compliant instruments record minimum and maximum reading with recall. The devices are appropriate for conveyors, flow hoods, balancing, fans/motors/blowers, furnace velocities, refrigeration cases, paint spray booths, and environmental testing. A heavy-duty

S-Beam Load Cell Presents USB Output Option

January 13, 2009 4:18 am | Comments

Using a USB digital interface, FUTEK Advanced Sensor Technology’s LSB350 S-beam load cell offers “Plug & Play” with software for system integration via a USB output with 16-bit resolution. The instrument exhibits overload protection, nonlinearity of ±0.05%, deflection of 0.003” nominal, and an operating temperature range from


Machine Vision Camera Captures at 22 fps

January 13, 2009 4:04 am | Comments

Based upon a 1.3-megapixel CMOS progressive scan sensor, Toshiba Teli’s CSB1100CL-10 machine vision camera offers 1240 × 1024 resolution and 22-frame-per-second capture of moving subjects. The device performs in applications in factory automation, OCR/DCR reading, inspection, and quality control with a signal-to-noise ratio of

Dynamometers Test Small Rotary Devices

January 12, 2009 10:24 am | Comments

Capable of testing small rotary devices such as motors, pumps, generators, and compressors, the MicroDyne series of small motoring dynamometers from SAKOR Technologies is a four-quadrant dynamometer ranging in sizes from 100 W to 5 KW. The dynamometer system is compatible with larger rotary components as well as

TFT-LCD Supports up to 18-bit Colors

January 12, 2009 10:19 am | Comments

Supporting up to 18-bit (262 k) colors, the OSD057GPEGB-A0 from OSD is a 5.7" diagonal 640xRGBx480 (VGA) TFT-LCD intended for the industrial control & mobile computing market. It allows image rotation via digital user inputs. The built-in timing controller supports both Sync mode and DE mode operation. Backlight brightness is 220 cd/m2 typical with a contrast ratio of 300:1

Low-Profile Inductor Operates up to 1 MHz

January 12, 2009 10:07 am | Comments

Provided in versions with an inductance range from 0.10 µH to 22 µH, the IHLP family of inductors from Vishay Intertechnology can operate at a maximum frequency of up to 1 MHz. additional features include a saturation current range from 1.7 A to 25 A, a typical DCR from 2.6 mOhm to 250 mOhm, and a maximum DCR from 2.9 mOhm to 260.0 mOhm.

Pressure Sensors Target Medical Air Apps

January 12, 2009 5:57 am | Comments

Coming in a 21.29 mm × 16.71 mm SMT package, Kavlico’s P6060 pressure sensors are suitable for air pressure measurements in oxygen concentrators, respirators, and ventilators. The 1.30-g (max.) components uses a 5-V input for a 0.5-VDC to 4.5-VDC linear analog amplified output proportional to the pressure with the option to


Bulkhead BNC Jack Shielded to 1 GHz

January 12, 2009 5:43 am | Comments

Featuring a nickel-plated zinc-alloy metal housing, the LTI-7BSF54HNPM-F 75-Ohm BNC jack connector from Lighthorse Technologies is shielded to 1 GHz. Press-fit forks for wave-solder termination and a rear-mount configuration allows for

SMT DC/DC Converter Modules Supply 1 W

January 12, 2009 5:32 am | Comments

Appropriate for ground loop elimination and voltage isolation in digital interface applications, Tracopower’s TES-1 Series SMT DC/DC converter modules deliver 1 W of output power. The 18 models exhibit input voltages of 5 VDC, 12 VDC, or 24 VDC and single or dual outputs from 5 VDC to ~15 VDC. The isolated devices demonstrate

RAID Storage Controller Exhibits 8-Gb Host Connectivity

January 12, 2009 5:17 am | Comments

Sitting between workstations or a SAN and low-cost JBOD disk storage, ATTO Technology’s FastStream SC 8500 RAID storage controller provides 8-Gb fibre channel host connectivity to multiple tiers of low-cost, off-the-shelf SAS/SATA disk storage enclosures. The device supplies

M16 Connectors Include PG11 Cable Outlet

January 12, 2009 5:00 am | Comments

Offering a 4-mm to 6-mm and a 6-mm to 8-mm option, Binder-USA’s Series 423 M16 field-attachable DIN connectors have a PG11 cable outlet for cable diameters from 8 mm to 10 mm. The products consist of 7 to 24 gold-plated contacts and an internal shielding ring that protects against EMI. When properly mated, the mated pair is

Voltage Regulator Rated to 40 A

January 10, 2009 9:25 am | Ericsson Power Modules | Comments

Featuring a high current density of 7.900 A/cm³ (129 A/in.³), the BMR451 voltage regulator from Ericsson Power is a digitally controlled, non-isolated voltage regulator rated to 40 A. The voltage regulator measures 30.850 × 20 × 8.200 mm (1.215" × 0.787" × 0.323"), offers a 4.5-V to 14-V input voltage range, a 0.6-V to 3.6-V output voltage range and an MTBF figure of 2.600 million hours. The BMR451 is priced at $22.50.


Power Supplies Achieve up to 1,200 W

January 10, 2009 9:19 am | Murata Power Solutions Inc. | Comments

Coming in the 1U form factor, the C1U-W-1200-12-Tx and C1U-W-12-48-Tx AC/DC front end power supplies from Murata Power Solutions provide 1,200 W (110/220 VAC) of high density power. The supplies require 9.2 W/in.³ power density minimises space. The C1U-W-1200-12-Tx has a main output of 12 V and standby outputs of

Connectors Unite With a Quarter Turn

January 9, 2009 8:32 am | Comments

Incorporating a molded composite plug shell, coupling nut, and receptacle, the Amphe-GTR series of connectors from Amphenol features a reverse bayonet coupling that provides pairing and unpairing using a quarter-turn coupling device. Available formats include three, four, or five pin variations, a compression (setscrew) wire termination for either 4/6 AWG or 8/10 AWG, and silver-plated contacts


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.