Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Chip Capacitor Includes Flexiterm Termination

October 3, 2008 9:20 am | Avx Corporation | Comments

Presenting compatibility with standard SMT reflow processes, AVX’s tip and ring chip capacitor uses a standard nickel barrier solder plate Flexiterm termination. The MLC unit demonstrates a X7R dielectric rating from -55°C to 125°C with a capacitance value of up to 1.2 micofarads, TELCO rating of 250 VDC, and dielectric withstand voltage of

Epoxy Adhesive Cures at Room Temperature(2)

October 3, 2008 8:27 am | Comments

Able to cure at room temperature, the EP30 two component epoxy adhesive from Master Bond can also be accelerated by moderate heat. The adhesive will bond to such substrates as metal, ceramic, glass, and many plastics. The lap shear strength exceeds 3,000 psi for aluminum to aluminum bonds. The EP30 is particularly marketed for assemblies where only very thin bond lines are dictated

TOPICS:

Resistor Ink Replaces Cermet Material

October 3, 2008 7:37 am | Comments

Obtaining intermediate wear resistance values by blending with adjacent members, LORD Corporation’s 8600 Series polymer resistor ink can be utilized as an alternative at Cermet materials for potentiometer applications. The RoHS-compliant cured film screen-prints onto printer circuit boards, ceramics, glass, phenolic, and flexible substrates that are

Advertisement

DC/DC Converters Feature Open-Frame Construction

October 3, 2008 6:42 am | Murata Power Solutions Inc. | Comments

Two series (HPH and UCH) of single output, half-brick, isolated DC/DC Converters from Murata Power Solutions are isolated to 2250 VDC with an open-frame construction and are designed for PCB mounting. The HPH series delivers up to 360 W of power and 70 A output current. The UCH series comprises modules that deliver between 50 W and 150 W of output power, and a maximum output current of 40 A

Stepper Motor/Driver/Controller Offers USB Interface

October 3, 2008 6:01 am | Comments

Coming in a NEMA 17 package, Arcus Technology’s DMX-J-SA stepper motor/driver/controller integrates a built-in USB 2.0 interface for communication and programming tasks. The single-axis solution exhibits a current rating of 2 A max at 24 V, and supports 16 micro-step operation. The USB interface eliminates the need for serial bus drivers or TCP/IP programming, and automatically detects the device. To operate in standalone mode, a BASIC-like

Rotary Position Sensor Lasts 1M Cycles

October 3, 2008 4:41 am | Comments

Adding to the Trimpot product line, Bourns’ Model 3382 12 mm dustproof rotary position sensor endures 1 million rotational cycles with an IP40 seal rating. The shaftless SMT instrument exhibits ±2% independent linearity in an operating temperature range from -40°C to 120°C. The sensor suits applications requiring frequent adjustment where

Power Inductors Show Tight Tolerance

October 2, 2008 11:42 am | Comments

Being magnetically shielded and epoxy molded, API Delevan’s SP1812, SP1210, and SP1008 Series SMT power inductors exhibit tolerances down to 2%. The SP1008 Series displays inductance from 0.270 µH to 100 µH and max. current ratings from 1.070 ADC to 0.102 ADC. The SP1210 Series possesses an inductance range from 0.470 µH to 390 µH and

TOPICS:

Switching Regulator Draws Low Quiescent Current

October 2, 2008 11:35 am | Comments

Protecting against overvoltage lockout transients up to 62 V, Linear Technology’s LT3972 3.5 A step-down switching regulator keeps quiescent current under 75 µA. The 3 mm² DFN-10- or MSOP-10E-packaged DC/DC converter provides an input voltage range from 3.6 V to 33 V and an output voltage range from 0.79 V to 30 V. The regulator utilizes a 4.6 A 95 mO switch with the necessary boost diode, oscillator, and control and logic circuitry while having a user-programmable switching frequency from 200 kHz to 2.4 MHz. The component offers

Advertisement

Tact Switches Endure 100,000 Cycles

October 2, 2008 10:35 am | Comments

Achieving an electrical rating of 50 mA at 48 VDC, CIT Relay & Switch’s CS1110 Series SPST tact switches works for an electrical life of 100,000 cycles. The 6.2 mm² devices offer an optional grounding tab, J lead or gull wing termination, and board-to-top actuator lengths of 2 mm, 2.3 mm, 2.5 mm, and 3.1 mm with a positive tactile feed. The RoHS-compliant

TOPICS:

Frame Grabber Supports Gigabit Ethernet Vision

October 2, 2008 9:33 am | Comments

Performing alignment, measurement, and identification in vision applications, ADLINK Technology’s PCIe-GIE62 PCI Express frame grabber demonstrates support for Gigabit Ethernet Vision. The card uses the bandwidth of a PCI Express x4 lane for up to 1,000 Mbps image acquisition rates and 2 independent Gigabit Ethernet ports to connect to multiple

Pressure Sensor Delivers 4.5 VDC Output

October 2, 2008 8:05 am | Comments

Requiring a 5 VDC power supply, Kavlico’s P6050 PCB mount pressure sensor dispenses a standard analog linear amplified output from 0.5 VDC to 4.5 VDC proportional to pressure. The piezo-resistive sensing technology-incorporating unit allows for the selection of a standard voltage output device or alternative digital SPI output with an embedded

TOPICS:

Test Instrument Combines DSO/DMM and Data Logging

October 2, 2008 7:10 am | Comments

Storing data logging memory to 17,000 points, Protek Test and Measurement’s Model S2505 integrates a battery-operated dual-channel 5 MHz bandwidth DSO providing 50 Ms/s sampling rate and a 10,000-count true rms DMM. The DSO section performs with ±3% vertical accuracy, 512 B record length in single shot/glitch capture mode (256 B in other modes), sweep rate from 1 µs to 5 sec, 16 waveforms and setups memory storage, and

Rackmount Enclosures Encase MicroTCA Chassis

October 2, 2008 6:10 am | Comments

Meeting MIL-STD-810F, 167, 461D, and 901D standards, Elma Electronic’s 19” rackmount enclosures have the capability of holding the ATR (Air Transport Rack) version of the ruggedized MicroTCA chassis. The device allows for ruggedization techniques, such as

Advertisement

HDDs Hold 120 GB per Platter

October 2, 2008 5:07 am | Comments

Integrating into portable media players, camcorders, and mobile PCs, Toshiba Storage Device Division’s dual-platter MK2431GAH and single-platter MKxx31GAL Series 1.8” HDDs exhibit 120 GB per platter. The parallel ATA-interfaced components offer an areal density of 344 Gb/in.², media transfer rate of 488 Mbps, rotational speed of 4,200 rpm, average seek time of

Slide Switches Exhibit Right Angle Actuations

October 1, 2008 12:33 pm | Comments

Suiting momentary or momentary and latched operation, C&K Components’ AYZ, JS, JSM, and PCM Series slide switches display right angle actuations. The 1.5 mm high AYZ Series possess 1 or 2 poles, double- and triple-throw action, offset or side actuation, contact resistance of <80 mO, surface mounting, and life cycles to 10,000 operations. The 0.7 mm

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading