Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Backplane Uses Star Routing Topology

September 2, 2008 9:32 am | Comments

Complying with VITA 41.0 specifications and the VITA 38 specification for system management, Elma Bustronic’s 8-slot VXS backplane utilizes a Star routing topology and backplane simulation for signal performance. The 6U-high device includes

Load Switches Demonstrate Voltage Protection

September 2, 2008 6:34 am | Fairchild Semiconductor | Comments

Operating with an input voltage range from 1.8 V to 5.5 V, Fairchild Semiconductor’s FPF22xx Series IntelliMAX load switches include undervoltage lockout (UVLO), thermal shutdown and current limiting. The J-STD-020- and RoHS-compliant components offer

Power Supplies Offer Universal Inputs

September 2, 2008 5:34 am | Comments

Working with 120 VDC to 370 VDC supplies, RECOM Electronic’s RAC-SB Series of 5 W and 10 W single-output AC/DC power supplies exhibit universal inputs ranging from 90 VAC to 264 VAC. The 2” × 1” encapsulated PCB mount or panel mount devices present five output voltage options ranging from 3.3 VDC to

Advertisement

Potentiometers Demonstrate Low Resistor Tolerance Error

August 29, 2008 7:25 am | Analog Devices, Inc. | Comments

Designed for open-loop applications, Analog Devices’ AD529x family of single-channel 10-bit programmable digital potentiometers offer less than 1% end-to-end resistor tolerance error over a supply voltage of ±15 V. The 14-lead TSSOP-packaged products use the iCMOS modular manufacturing process to combine CMOS and bipolar technologies to enable the device to support dual power supplies in the ±10.5 V to

AC/DC Switching Supplies Comply with EN55022 Standards

August 29, 2008 6:09 am | Comments

Operating in medical instrumentation and commercial-grade industrial control and telecommunications systems, Astrodyne’s EFM30 and EFM30/M Series modular AC/DC switching supplies meet EN55022, Class B standards for EMC noise performance. The 3.41” × 2.36” × 0.93” devices exhibit universal input acceptance from 90 VAC to

TOPICS:

Power Supplies Deliver 1,500 W Loads

August 28, 2008 12:02 pm | Comments

Operating with full load convection cooling from 0°C to ~45°C, DongAh Elecomm’s PSU-750 Series of 750 W switching power supplies demonstrates 1,500 W peak load capability for up to 5 minutes. The 13.38” × 4.570” × 1.970” open frame components include universal AC input with active power factor correction

Transceiver ICs Integrate Microprocessor

August 28, 2008 10:41 am | Comments

California Eastern Laboratories’ ZIC2410 Series of ZigBee transceiver ICs combine a ZigBee-compliant RF transceiver with an 8051-based 8-bit microprocessor. The QN48- or VFBGA72-packaged devices offer a receiver sensitivity of -98 dBm, link budget of 106 dB and maximum output power of 8 dBm. The system-on-chip

SSLD Functions at 25 V

August 28, 2008 9:13 am | Comments

Working as a low dropout driver (LDD), Catalyst Semiconductor’s CAT4101 linear-based constant-current SSLD operates with a LED pin compatible up to 25 V. The 5-lead TO-263-packaged component drives strings of up to 10 LEDs adjustable to 1 A. The driver offers current sink of 1 A via an external resistor, dropout voltage of

Advertisement

Servo Drives Supply 7 A

August 28, 2008 8:10 am | Comments

Measuring 5” × 3” × 1.75”, Applied Motion Products’ SV Series servo drives deliver up to 7 A rms continuous or 14 A rms peak output current from a 24 VDC to 80 VDC power supply. The devices provide 8 digital inputs, 4 digit outputs, 2 analog inputs and a RS232 or RS485 communication interface. The drives use a digital PID loop with

TOPICS:

Capacitors Operate at 200°C

August 28, 2008 7:03 am | Avx Corporation | Comments

Handling harsh and rugged operating environments, AVX’s SMX and CHX Series stacked ceramic capacitors perform in temperatures up to 200°C. The devices offer a maximum capacitance of 340 microfarads at 25 V and a maximum voltage rating of 500 V. The switch mode power supply capacitors are suitable for high transient

Pitch Connector Performs in Wide Height Range

August 28, 2008 6:03 am | Comments

Adding to the SMC 1.270 mm (0.500”) pitch connector line, ERNI Electronics’ SMC Board-to-Board-Adapter presents connectivity in board-to-board heights from 20 mm to 40 mm in 2 mm increments. The device has male contacts on both component ends and availability in 12, 26 and 50 pins to lock into a standard SMT

TVS Diode Demonstrates ESD Protection

August 28, 2008 5:06 am | Comments

Operating in ±5 V environments, OnChip Devices’ ESD0402-01FR single-channel TVS diode dissipates ESD strikes of ±8 kV contact discharge, in accordance to the IEC 6100-4-2 standard. The 0402-sized or 1 mm × 0.6 mm × 0.5 mm SMT DFN-2-packaged component

SBC Uses 512 MB of RAM

August 27, 2008 12:08 pm | Comments

Adding to the Hercules II EBX SBC family, Diamond Systems’ HRC800-5N512 SBC offers 512 MB of RAM on an 800 MHz VIA Mark CoreFusion processor while operating over a temperature range from -20°C to 70°C. The 5.75” × 8” (146 mm × 203 mm) component integrates a Pentium III-level CPU with or without data acquisition, and a DC/DC power supply. The computer

Advertisement

PROFIBUS Analyzer Integrates Oscilloscope

August 27, 2008 10:34 am | Comments

Translating PROFIBUS to USB and vice versa, Grid Connect’s ProfiTrace 2 PROFIBUS analyzer incorporates a digital oscilloscope to capture bus signals running at 12 Mbps, display them using the Bit Interpretation Engine, indicate a problem’s distance, and the option to show one device’s signals. The DP-V0/DP-V1 class 1 and 2 master uses the Live List statistics matrix to list all available devices and information including retry messages

Encoder/Decoder Shapes RS-232 Data Signals

August 27, 2008 9:12 am | Comments

Supporting data ranges from 1.20 kb/s to 115.20 kb/s, Vishay Intertechnology’s TOIM5232 encoder/decoder presents proper pulse shaping of RS-232 data signals for serial infrared (SIR) IrDA transceivers. The device shortens RS-232 output signals to IrDA-compatible electrical pulses to drive an infrared transmitter in transmit mode, and

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading