Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

XGA Industrial TFT Display Features Extended Temperature Range

April 2, 2008 11:51 am | Comments

i-sft introduces its I-SFT 100i.10X-XT industrial TFT with a 10.4" open frame display with XGA resolution and an extended temperature range that has been tested according to MIL-STD810. The economic lifetime of 50,000 hours (MTTH) is specified, covering the temperature range from -31°C to +-85°C, whereas cold starting is possible up to -31°C. Due to the integrated inverter, this rugged system is energy-efficient. The device is characterized by a high shock and vibration resistance. A brightness of 1,000 cd/m2, a dimming range of 1:1,000 and a contrast of 800:1 ensure that the display can be read optimally in direct sunlight and at night.

840 nm SLEDs Conform to Bellcor Standard

April 2, 2008 11:44 am | Comments

AMS Technologies introduced EXALOS AG’s line of 840 nm superluminescent light emitting diodes (SLEDs) that typically exhibit 5 mW of optical power in a single mode fiber and a 48 nm, 3 dB spectral bandwidth. The standard light sources are delivered in a 14-pin butterfly housing with a monitor diode and a fixed connection/angled physical contact connector. The parts conform to the Bellcor GR-468-CORE standard, and they can be integrated into OCT systems, data transfer units and fiber optic sensors for civil structure monitoring as well as for aerospace navigation.

Fine Binning for White LEDs Delivers Improvements

April 2, 2008 11:37 am | Comments

SRAM Opto Semiconductors introduced its advanced fine binning for white LEDs that delivers improvements in off-angle color uniformity as well as a typical color rendering index (CRI) of 80+. This advanced binning process for white LEDs corresponds to a 3-step McAdams ellipse, and it is available for Power TOPLED, Advanced Power TOPLED and the proprietary DRAGON family of products. Applications such as backlighting of diffused surfaces and linear array applications benefit from the uniform light enabled by this technology which is fully ANSI/Energy Star-compliant in the United States.

Advertisement

QVGA Modules Feature a Touchscreen Option

April 2, 2008 11:31 am | Comments

Phoenix Display International (PDI), Inc. introduced its line of 5.7" monochrome QVGA modules that are available in FSTN/gray/positive/transflective or STN/blue/negative/transmissive configurations. These graphic modules (PN G-320240-5.7) allow the user to control each pixel individually to display both text and graphics simultaneously. With a variety of options available, the monochrome graphic displays are modular in design, and they can be customized to fit specific applications. Both the STN and FSTN models are available with an RA8803 controller with built-in touchscreen controller, and they can be configured with either a CCFL or LED backlight.

HV Nonmagnetic Variable Trimmer Capacitor Works at Cryogenic Temperatures

April 2, 2008 10:52 am | Comments

Featuring high purity ceramic dielectrics, the SGNM series of high voltage nonmagnetic variable capacitors from Sprague-Goodman Electronics can be sealed to 40 lbf/in2 (276 kPa), or used for cryogenic applications as low as 4K. DC working voltage ranges from 1.5 kV up to 7.5 kV (DC withstanding voltage from 3 kV to 15 kV). Capacitance ranges start with 1 – 10 pF, and increase (in 5 pF increments) to 10-180 pF. The capacitors

Constant Current LED Driver Detects Dark Pixels In Real Time

April 2, 2008 10:29 am | Comments

Macroblock's MBI5039, aimed at LED panel applications, offers real-time error detection of the full LED panel, helps designers to detect dark pixel errors. This 16-channel constant current LED driver supports constant output current from 3 mA to 90 mA and sustains up to 17V at the output ports. The clock frequency

InGaN White LEDs Perform in General Lighting Applications

April 2, 2008 10:07 am | Comments

Allegro Microsystems, Inc. announced its series of white multi-chip LEDs that provide a range of high-powered InGaN white LEDs that can be used in general lighting applications, amusement and gaming equipment, and for backlighting TFT displays. Each module combines either six or eight LEDs in one to four separate channels. Modular design allows the SEPW devices to be assembled into string arrays by connecting the modules in a series.

Custom, DC Gearmotors with Cut Steel Gears for High Strength

April 2, 2008 10:03 am | Comments

Low cost DC gearmotors for OEM applications are available from Source Engineering, Inc. These 12 mm to 50 mm DC gearmotors are available with cut steel gears for high strength applications, plastic gears for low noise requirements, and low cost, powered metal. Available in ratios from 5:1 up to 3000:1, these low cost DC Brush type gearmotors are appropriate for pick-and-place, medical testing equipment, robotics, toys and games, valve and door actuation, ROV (Remotely Operated Vehicle) fin and steering actuators, appliances, manufacturing, security applications, and assembly operations. The inline and offset output shafts of the gearmotors can be custom machined with cross holes, splines, keyways, and flats, or end drilled and tapped.

TOPICS:
Advertisement

Front End/Rectifier Touts High Frequency at Light Loads

April 2, 2008 10:02 am | Comments

Cherokee International announced its 2,500W CAR2512 front end intended for low profile, 12V distributed power architecture applications such as high-performance enterprise and service-provider switches and routers, mid- to high-end servers and storage equipment.

Brush DC Motors Feature Quiet Operation

April 2, 2008 9:53 am | Comments

AMETEK Technical and Industrial Products introduced the PITTMAN Series 9000 brush-commutated DC motors that deliver quiet and smooth operation for equipment used in data storage, medical/biotech, semiconductor processing and automation applications. Their modular construction promotes customization to satisfy specific requirements. These motors, with 2-pole stators, incorporate 7-slot skewed armatures to minimize magnetic cogging (or reluctance torque), and they enable smooth and quiet running performance. Commutators are diamond-turned after armature assembly to ensure optimum concentricity and long brush life. Windings are resin-impregnated for greater reliability in incremental motion applications. Standard features include ceramic magnets, silicon steel laminations, copper graphite brushes and heavy-gauge steel housing. Speed, voltage, current and torque characteristics can be varied to meet application demands.

TOPICS:

Electronic Timer Relays Perform in Universal Applications

April 2, 2008 9:46 am | Comments

Phoenix Contact introduced its family of electronic timer relays (ETDs) that offer a range of timing settings and other practical functions. Featuring easy set-up and diagnostics, the ETDs are appropriate for use in universal applications. They monitor different time functions without using complicated controllers. The timer relays can be adjusted to an array of timing settings ranging from milliseconds through several days. ETD devices equipped with special functions, including star/delta (or Wye/Delta) and watchdog, are also available.

8-port PoE Midspan Allows Remote Monitoring

April 2, 2008 7:34 am | Phihong | Comments

Fully compliant with the IEEE802.3af power-over-Ethernet (PoE) standard for detection, disconnect, and voltage control, the POE125U 8-port midspan from Phihong enables remote monitoring for single points of backup in applications such as small office environments, wireless access points, and IP cameras for security applications. The SNMP-capable Gigabit-compatible 8.9" × 7.8" × 1.75" device provides up to 15.4W of power per port

LowProfile SMD Board to FPC Connector with 0.4 mm Pitch Dual Row Contacts

April 2, 2008 6:59 am | Comments

Suitable for use in handheld electronics, Omron Electronic Components RoHS compliant XB4A (plug) and XB4B (socket) series of 0.4 mm (0.016”) pitch SMD board to FPC plug and socket connectors have a stacking height of 0.9 mm (0.035”) and a width of 4.1 mm (0.161”) or 5.0 mm (0.20”), including the solder terminals, when mated. Their high reliability double contact point gold plated contacts are resistant to improper contact alignment and

Advertisement

Low-Profile Transformer Suits Military Applications

April 2, 2008 6:29 am | Comments

Provided in both SMT and through-hole configurations, the LVB-4203 MIL-STD-1553 data bus transformer from Beta Transformer Technology is intended for use with 3.3V transceivers in military and other high-reliability applications. The transformer has a low profile of 0.130” height with a 0.625” × 0.625” footprint.

Round Rocker Switches Offer Multiple Functions

April 2, 2008 6:16 am | Comments

A snap-in fit for a 20 mm panel hole, Phaseda’s single-pole RL3-5 round rocker switch is configurable as a SPST or SPDT device and the double-pole RL3-4R rocker switch offers DPST functionality. The switches can handle a UL-approved 16A or 1/3HP at 125V AC for high power and motor applications, and 10A at 125V AC for small appliances and normal usage with cUL and VDE approvals, and are RoHS compliant.

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading