Advertisement
Product Releases
Advertisement

Hall-Effect Linear Current Sensor IC Includes Overcurrent Fault Output

Fri, 12/03/2010 - 6:52am

LISTED UNDER:

linear Hall sensor ICAllegro MicroSytems, Inc. introduced a new Hall-effect IC for AC or DC current sensing in low-voltage audio, communications systems, white goods, and automotive applications. Typical applications include circuit protection, current monitoring, and motor and inverter control. The device consists of a linear Hall sensor circuit with a copper conduction path located near the surface of the die. Applied current flowing through this copper conduction path generates a magnetic field which is sensed by the integrated Hall IC and converted into a proportional voltage. Device accuracy is optimized through the close proximity of the magnetic signal to the Hall transducer. The output of the device has a positive slope proportional to the current flow from IP+ to IP– (pins 1 and 2, to pins 3 and 4). The internal resistance of this conductive path is 1.2 m? typical, providing a non-intrusive measurement interface that saves power in applications that require energy efficiency. The ACS711 is optimized for low-side current sensing applications, although the terminals of the conductive path are electrically isolated from the sensor leads (pins 5 through 8), providing sufficient internal creepage and clearance dimensions for a low AC or DC working voltage applications.

Allegro Microsystems
508 8535000, www.allegromicro.com 
Advertisement

Share this Story

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading