Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases
View Sample

FREE Email Newsletter

ECN Daily

Enclosures accommodate DIN rail mounted electronics

March 21, 2014 9:20 am | Hitaltech USA | Comments

Hitaltech (Valley Cottage, NY) introduced the latest addition to Italtronic’s DIN Rail mounted enclosure ‘Railbox’ range, the RAILBOX COMPACT, suitable for electronic applications mounted on a DIN Rail (EN 60715). Four sizes are available

TOPICS:

Compact fuse provides 1500 A breaking compacity at 500 VAC

March 21, 2014 8:05 am | Schurter Inc. | Comments

SCHURTER (Santa Rosa, CA) is pleased to announce the new series SHF 6.3x32 compact fuse. The series provides overcurrent protection up to 500 VAC. The high breaking capacity of 1500A at rated voltage safeguards electronic systems and operators in the event of a catastrophic short circuit incident....

TOPICS:

MCU series integrates ARM technology for the fast-growing Chinese automotive market

March 20, 2014 1:01 pm | Freescale Semiconductor | Comments

Freescale Semiconductor (Austin, TX) announced that its ARM-based Kinetis Series of microcontrollers (MCUs) is being introduced into the automotive market. The series is designed to speed and simplify the development process for

TOPICS:
Advertisement

Silicon devices help address ESD and surge protection challenges

March 20, 2014 12:35 pm | Comments

TE Connectivity’s Circuit Protection business unit (Menlo Park, CA) has introduced a new family of silicon ESD (SESD) devices exhibiting ±20-kV and ±22-kV air discharge ratings to help designers solve the pervasive protection challenge caused by

TOPICS:

Load switch offers low on-resistance and 4-A maximum continuous current

March 20, 2014 12:00 pm | Advanced Power Electronics Corp. USA | Comments

Advanced Power Electronics Corp. (San Jose, CA) launched a small load switch with controlled turn on and very low on-resistance. The APE8937-HF-3 load switch contains one N-channel MOSFET that can

TOPICS:

DC power connector is halogen free

March 20, 2014 11:30 am | Anderson Power Products | Comments

Anderson Power Products’ (Sterling, MA) Saf-D-Grid Ultra Short Receptacle is being manufactured in a halogen free, high temperature housing material to meet equipment manufacturers’ desire to offer eco-friendly devices. This 25-A, 600-V

TOPICS:

OLED display designed for applications with small size LCDs

March 19, 2014 4:04 pm | Comments

Microtips Technology is excited to announce our new 8x2” Sunlight Readable OLED display. This low cost passive matrix 8x2 character OLED display modules makes a great option for any application using small size LCDs.

TOPICS:

Three-phase medium power film capacitors suit PFC, AC filtering applications

March 19, 2014 11:33 am | Avx Corporation | Comments

AVX Corporation (Greenville, SC) has released the FLB Series medium power film capacitors.  Packaged in a cylindrical aluminum can with terminals that enable direct, three-phase, internal wire connection, FLB Series capacitors are comprised of

TOPICS:
Advertisement

Power supply unit is designed for CompactPCI Serial

March 19, 2014 11:11 am | Schroff | Comments

Pentair (Straubenhardt) has created a 'quasi' standard for pluggable Schroff CompactPCI Serial PSUs and developed an AC PSU with a wide input voltage range. The PICMG has defined the power supply arrangements for CompactPCI Serial as

TOPICS:

Two-Watt DC/DC "cube" halves industry standard footprint

March 19, 2014 10:54 am | Murata Power Solutions Inc. | Comments

The MTU2 Series of miniature surface mounted 2-W DC/DC converters from Murata Power Solutions (Mansfield, MA) is believed to be the industry's smallest 2-W converter and measures 8.2 mm x 8.4 mm x 8.5 mm with a 0.69 cm2 footprint and presented as being 50 percent smaller than

TOPICS:

Digital PWM controllers and integrated solutions present end-to-end solutions with PMBus

March 19, 2014 10:28 am | International Rectifier | Comments

International Rectifier introduced its latest generation of MBus-enabled, CHiL digital PWM controllers and integrated PowIRstage solutions that are said to significantly improve efficiency and reduce board space and component count in a variety of

600-V rectifiers are desirable for PFC applications

March 19, 2014 9:57 am | Central Semiconductor Corp. | Comments

Central Semiconductor Corp. (Hauppauge, NY) introduced several new 600-V HyperFast Rectifiers designed for extremely fast switching applications, such as Power Factor Correction (PFC), where total conduction losses must be minimized and at the same time, power density must be maximized. The series

TOPICS:

Shunt resistor increases heat dissipation

March 18, 2014 12:06 pm | Stackpole Electronics, Inc. | Comments

The HCS Series shunt resistor from Stackpole (Raleigh, NC) uses a solid metal element that is elevated off the mounting plane. This elevated design increases the ability of the part to dissipate the heat into the ambient air and not into the PCB. The HCS2512, for example, will

TOPICS:
Advertisement

T1/E1 Transformers meet strict telecom application requirements

March 18, 2014 11:50 am | Bourns, Inc. | Comments

Bourns, Inc. (Riverside, CA) added two T1/E1 transformers to the company’s inductive components product line. Designated Bourns Models SM75056PEL and SM75057PEL, the new devices are potted construction

TOPICS:

Inductive position sensor is a drop-in replacement for magnetostrictive cylinder position sensors

March 18, 2014 11:11 am | Comments

Alliance Sensors Group (Moorestown, NJ) announced the MR Series of Linear Position Sensors for use in measuring the ram position of hydraulic and large pneumatic cylinders. The MR Series is presented as a drop-in form, fit, and function replacement for

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading