Advertisement
Product Releases
Subscribe to ECN Magazine Product Releases

Filter Targets High Voltage Applications

September 15, 2008 9:04 am | Comments

Extending its SineFormer Series of EMC output filters, Epcos has designed its B84143V*R290. This filter is designed for applications up to a voltage of 760 V and is available in current stages of 95 A, 180 A, and 320 A. Depending on their type, they are operated at clock frequencies from 205 kHz. The technology allows there to be no shielded motor

Spot Curing System Offers Visible Light and High Intensity

September 15, 2008 8:59 am | Comments

Offering visible light and high-intensity spot curing the BlueWave LED from DYMAX, is a LED system that has no bulbs to change, cool cures, no warm-up, and constant intensity for thousands of hours. The LED generates light using an array of surface mount LEDs (Light Emitting Diodes) instead of metal halide or mercury bulbs. The LEDs produce

Cavity Filter Series Designed for Wireless Applications

September 15, 2008 8:52 am | Comments

Designed for WiMAX applications and other wireless metro area network systems, the WiMAX cavity filter series from MtronPTI covers the 2.3 GHz to 2.7 GHz frequency range with emphasis on low-loss narrowband systems. The series utilizes a re-configurable design platform fully modeled in EM (Electromagnetic) simulation software, and tested with a stringent design verification process. The available

Advertisement

Varistor Eliminates Fire Danger

September 15, 2008 8:46 am | Comments

Eliminating the risk of fire or explosion resulting from overvoltages or leaky currents, the SFS14K385E2 from Epcos, is a varistor designed with a plastic coating to prevent smoke from developing. In the event of a fault, no other components

Ferrite Material Designed for Power Applications

September 15, 2008 8:41 am | Comments

Two ferrite materials are designed by Epcos for power range typical of SMPS and current meters. The N95 is distinguished by a high flux density of 525 mT at 25°C and 410 mT at 100°C. A specific feature is its low power dissipation at 100°C; it is only 250 kW/m³ at 500 kHz and has a flux density of 50 mT. It has an optimum operating frequency range

Oscillators Exhibit Frequency Stability Range

September 15, 2008 8:32 am | Comments

Operating over a frequency range from 6.40 to 40 MHz, Connor-Winfield’s PF1 and PF2 Series oven-stabilized crystal controlled oscillators (OCXOs) and voltage-controlled OCXOs (VCOCXOs) offer frequency stabilities from ±0.05 to ±0.25 ppm in 0.05 intervals. The Pb-free RoHS-compliant devices perform with a LVCMOS or HCMOS output

Scanning Software Performs in WiMAX Drive Test

September 15, 2008 8:23 am | Keysight Technologies | Comments

Utilizing option E6474-655, Agilent Technologies’ E6474A Release 12.0 scanning mode software enables a standard WiMAX PC card (CPE) to become a handheld scanning solution for WiMAX Drive Test. The program offers dedicated RF measurements on up to 10 channels with to report Preamble Index Decode, BSID

Silicon Photodiode-Preamplifier is Blue/Green Enhanced

September 15, 2008 8:16 am | Comments

Offering a wavelength response at 450 nm, the ODA-5WB-100k from Opto Diode, is a 5 mm² photodiode-preamplifier, that is a blue-green-enhanced device. The silicon detector-preamp features 100 KO gain (custom gains are also available, upon request). Responsivity ranges from 400 nm to 1100 nm, with a peak spectral response

TOPICS:
Advertisement

Cameras Offer Sensitive Image Capabilities

September 15, 2008 8:09 am | Comments

Offering imaging capability for UAV and UGV (unmanned aerial and ground vehicle) applications, the KTX and KTSX camera from Sensors Unlimited increase both day and night time image sensitivity. The KT camera family features the night vision and laser detection capability that images from the NIR (near infrared) to the SWIR (shortwave infrared) portion of

Optometer Exhibits Microprocessor Control

September 15, 2008 8:01 am | Comments

Designed and configured for all LED measurement requirements, the portable S-741 LED optometer from UDT Instruments features microprocessor control and three measurement data-presentation options: direct display measurement with analog bar, RS-232C computer interface, and analog voltage input. The unit is equipped with a silicon photometric detector and LED holding sockets for many common LED types. All the sockets are

LCD Displays Offer New Options for Market Applications

September 15, 2008 7:54 am | Comments

Offering new options for high-efficieny market applications, White Electronic Designs is expanding its family of enhanced LCD displays. These displays join the AMLCD product suite that meets both commercial and military requirements for sunlight readability and maximum viewability, while

TOPICS:

Linear Positioning Stage Offers Micron Bidirectional Repeatability

September 15, 2008 7:49 am | Comments

Featuring micron bidirectional repeatability, the SMS 12 positioning stage from Equipment Solutions, combines a cross roller bearing stage and an almost zero backlash drive mechanism. This linear positioning stage has up to 12 mm of travel, 2Gs maximum acceleration, a maximum

Alarm System Enables Complex Conditions

September 15, 2008 7:45 am | Comments

Enabling more complex alarm conditions, the EL042 EnviroMon PC data logging system from Pico Technology, is a system upgrade that automatically measure and records temperature, humidity and other parameters, and warns you when reading go out of range. The system

Advertisement

Brushless DC Motor-Drive Offers Integral Driver

September 15, 2008 7:36 am | Comments

Designed with an integral driver, the LB22 from Nidec Copal, is a 22 mm brushless DC motor-drive that 3.26 oz/in. with an input current of 1.40 A at 12 VDC. The RoHS-compliant motor has separate power leads for the driver circuit and the motor allowing variable input to the motor for speed control. Another lead provides

TOPICS:

DC Servo Motors Run at High Speeds

September 15, 2008 7:30 am | Comments

Running at speeds from 0 rpm to 10,000 rpm, the MR15 line of DC Servo Motors from Dynetic, is capable of a torque up to 80 lbs/in. when coupled with a gearhead. Options on the motor include: all alluminum alloy parts which are anodized per

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading