Advertisement
Electrical

Dual-channel TDR locates faults on all metallic cables

April 23, 2015 12:57 pm | by Megger | Product Releases | Comments

Megger now offers the TDR2010, a dual channel, high resolution time domain reflectometer (TDR) for locating faults on all metallic cables, including twisted pair wires and coax cables. This new TDR features a large (800 x 400 pixels), extra high-resolution (to 0.1 m), backlit, WVGA color LCD display with user definable tones.

LISTED UNDER: Electrical

8.5 GHz auto calibration unit ideal for manufacturing and test facilities

April 14, 2015 1:48 pm | by Anritsu Company | Anritsu Company | Product Releases | Comments

Anritsu Company introduces the MN25208A SmartCal two-port 8.5 GHz auto calibration unit for its ShockLine family of vector network analyzers (VNAs). A plug-and-play calibration unit, SmartCal automatically powers on via a USB connection and loads calibration coefficients from on-board memory, for faster ...

LISTED UNDER: Electrical

CableEye® M3U Cable Tester System: Item 821U

March 3, 2015 5:00 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Schematic Capture | Data Acquisition | Data Loggers
Advertisement

Light Director™ Guided Assembly System: A CableEye® Accessory

March 3, 2015 4:56 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Schematic Capture | Test Instrumentation | Data Loggers

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 3, 2015 4:48 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10V to 1500V DC, or 10V to 1000V RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Data Loggers | Meters | Probes

Modular electronic loads feature current ratings of 60 A

February 12, 2015 1:33 pm | by Intepro Systems | Intepro Systems | Product Releases | Comments

INTEPRO Systems announces the introduction of its new line of 1800 W modular electronic loads. The ML1800 Series features an 8-inch TFT LCD color display with multiple language selection that is visible from across the room. The 6-slot chassis can be specified with up to six 300 W or three 600 W modules....

LISTED UNDER: Electrical

JSB215 USB 2 Amp Relay Module

June 18, 2014 1:49 pm | J-Works, Inc. | Products

USB control 2 amp relay module supports both AC and DC signals. Easy to use software API allows control 8 or 16 relays. Support for various operating systems.

LISTED UNDER: Data Acquisition | Microcomputer | Industrial

JSB210B USB Relay Module

June 18, 2014 1:45 pm | J-Works, Inc. | Products

USB controlled 1 Amp 8 or 16 single pole double throw relay module. Software examples for various windows programs, linux and other operating systems

LISTED UNDER: Data Acquisition | Industrial | Boards
Advertisement

600-V DC load module tests LED drivers

June 7, 2014 3:04 pm | Chroma Systems Solutions, Inc. | Product Releases | Comments

Chroma Systems Solutions, Inc. (Foothill Ranch, CA) announced the release of its 63115A LED Simulating DC Electronic Load. This new 10-A/600-V/300-W module is an addition to the company’s line of LED simulating 63110A/13A electronic loads....

LISTED UNDER: Electrical | Electro-Optic

USB Latching 8 Amp relay Module Model RSB2084

June 26, 2013 9:26 pm | J-Works, Inc. | Products

RSB2084 series of 8 Amp Latching SPST relay modules controlled over the USB. The relays are rated at 8A @ 250VAC Wire connection to the relay module are made with on-board screw type terminals and controlled by USB commands. A "latching relay' has two relaxed states (bistable). These relays are called 'impulse', "keep" or "stay" types. When the power is switched off the relays, the relay remains in its last state. The relay retains the last state during any power outages, and will only switch when command to by the host PC. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Embedded | Industrial

JSB2871 USB contol AC outlet relay

February 28, 2013 9:40 am | J-Works, Inc. | Products

JSB2871 series of 8 Amp DPST relay modules controlled over the USB with a standard AC power outlet. The relays are rated at 8A @ 240VAC. Wire connection to the relay module are made with on-board screw type terminals then any standard AC line cord can be plugged into the outlet and controlled by USB commands. A replaceable fuse provides protection of the relay and AC line. Options for the relay board include AC detection of either the input AC or output AC, telling the user if power is available. An on-board led gives a visual indication of the relay state. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Data Acquisition | Industrial
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading