Advertisement
Test & Measurement

Measuring machine features accuracy as low as 0.7µm

April 17, 2014 11:00 am | Product Releases | Comments

Mitutoyo America Corporation (Aurora, IL) announces the new STRATO-Apex574 Coordinate Measuring Machine to its STRATO-Apex line of CMMs. This new configuration offers a more compact footprint while still offering the same state-of-the-art blend of high-speed operation....

LISTED UNDER: Probes
Advertisement

Oscilloscopes add enhanced IBIS-AMI, S-parameters modeling support

April 15, 2014 2:26 pm | Tektronix | Product Releases | Comments

Tektronix (Beaverton, OR) extended the capabilities of the analysis system on its MSO/DPO70000 Series of Digital and Mixed Signal Oscilloscopes to include modeling of on-chip silicon behavior using IBIS-AMI models and S-parameters. This

LISTED UNDER: Oscilloscopes

LED solar simulator provides more than one sun of total irradiance

April 11, 2014 11:53 am | Product Releases | Comments

Innovations in Optics, Inc. (Woburn, MA) introduced the Model 2910A-100-SOL high power, multi-wavelength LED illuminator for testing photovoltaic devices that meets Class AAA solar simulator requirements of IEC 60904-9 for spectral match, uniformity of irradiance, and

LISTED UNDER: Electro-Optic

Four-channel portable oscilloscope samples at 5 GS/s

April 10, 2014 3:25 pm | Fluke Corporation | Product Releases | Comments

Fluke Corp. introduced its 190-504 Series II 500 MHz ScopeMeter Portable Oscilloscope, said to be the first to achieve a 500 MHz at 5 GS/s real time sample rate in a four-channel handheld, sealed, and rugged oscilloscope without compromising

LISTED UNDER: Oscilloscopes

Data acquisition system can hold up to 5 modules and up to 320 switch points

April 2, 2014 4:05 pm | Rigol Usa | Product Releases | Comments

Rigol Technologies USA (Oakwood Village, OH) announces their newest product category with the M300 Data Acquisition System, integrating Rigol’s 6.5 digit DMM technology into a robust and versatile system mainframe with modules enabling applications....

LISTED UNDER: Data Loggers

Insulation resistance tester rated at 15 kV

April 1, 2014 4:31 pm | Product Releases | Comments

Megger (Norristown, Pa) now offers a versatile insulation resistance tester (IRT) rated at 15 kV. The MIT1525 measures motors and generators above 34,500 V and equipment rated above 35 kV. Ideal for applications that use cables, transformers, motors/generators, circuit breakers, and bushings....

LISTED UNDER: Resistor

Company introduces the industry's first automated SSL test system

March 27, 2014 3:55 pm | Product Releases | Comments

ASE Test (Greenville, NC) has developed the industry’s first automated test system that is specifically designed for quickly testing the electrical performance of LED drivers, LED arrays, and LED fixtures. Designated the ASE SSL 3.0 Test System, this flexible test system can be used for design....

LISTED UNDER: Electro-Optic

Oscilloscope offers powerful analysis tools at bandwidths from 200 MHz to 1 GHz, powerful analysis tools

March 12, 2014 2:32 pm | Rohde & Schwarz | Product Releases | Comments

The new R&S RTE from Rohde & Schwarz (Munich) is available with bandwidths from 200 MHz to 1 GHz. An acquisition rate of more than one million waveforms per second helps users find signal faults quickly. The scope's accurate digital trigger system with virtually no trigger jitter is

LISTED UNDER: Oscilloscopes

Anti-diffusion gold coating lessens or eliminates the need for probe cleaning

March 10, 2014 3:18 pm | Product Releases | Comments

Aries Electronics (Bristol, PA) announced the introduction of its unique Protect-A Probe, anti-diffusion, gold coating for its complete line of burn-in and test socket spring probes. The Protect-A Probe coating is designed to lessen or eliminate the need for probe cleaning....

LISTED UNDER: Test

DSB3232 USB 32 channel Digital IO with mutiple voltage support.

March 4, 2014 1:23 pm | J-Works, Inc. | Products

The DSB3232 USB digital IO lines can be configured for input or output at the bit level supporting various logic family voltages. Those voltages included 1.8V, 2.5V 3.3V and 5V. Technicians wire the digital IO module using the on-board screw terminals. With the expanding number of logic level interface voltages, one of the challenges facing connecting devices to the USB bus is matching the required voltage levels and the DSB3232 meets those requirements.

LISTED UNDER: Computer | Microcomputer | Embedded

‘Battery fuel gauge’ integrated circuits reduce measurement errors to below ± 2.8 percent

March 4, 2014 12:35 pm | On Semiconductor | Product Releases | Comments

ON Semiconductor (Phoenix, AZ) has introduced a new family of complementary metal-oxide semiconductor (CMOS) ‘battery fuel gauge’ integrated circuits that provide accurate measurements of the remaining power level of one-cell lithium-ion (Li+) batteries commonly used in a wide range of portable electronics....

LISTED UNDER: Battery | IC

Miniature infrared touch probe designed for micro-machining applications

February 25, 2014 3:32 pm | Product Releases | Comments

Hexagon Metrology (North Kingstown, RI) announced the availability of the m&h IRP40.50 infrared touch probe for the North American market. The IRP40.50 is ideal for inspection in tight spaces and was designed to address the needs of miniature machining centers.

LISTED UNDER: Active

Digital temperature recorder ideal for industrial and commercial applications

February 18, 2014 4:05 pm | Product Releases | Comments

The EDL-LN2 from the Paul N. Gardner Company (Pompano Beach, FL) is a reliable and cost-effective digital temperature recorder for all industrial and commercial applications. Features include high-accuracy sensors and real-time viewing of ambient and remote temperature while using the RTD probe.

LISTED UNDER: Temperature

JSB470 USB 24 Channel Parallel Digital IO Module

February 7, 2014 3:20 pm | J-Works, Inc. | Products

JSB470 series of digital input and output modules controlled over the USB. Engineers control the channel direction and values from any host computer. Each digital IO line is 5V tolerant and provides a minimum 2.5V output at 15ma, and sink 24ma. A technician wires the digital IO module to their hardware via a standard 25 pin sub "D" connector. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Perfect for a variety of control, monitor and test & measurement applications

LISTED UNDER: Data Acquisition | Industrial | Instrument Control

Digital oscilloscope offers greater signal resolution and accuracy

January 28, 2014 2:29 pm | Rigol Usa | Product Releases | Comments

Rigol Technologies announces the DS2000A series Digital Oscilloscope, the latest addition to its extensive family of test and measurement equipment. Featuring Rigol's powerful UltraVision technology, the DS2000A delivers unprecedented value with its high sample rate, long record length, wide vertical range, low noise floor and exceptional pricing.

LISTED UNDER: Oscilloscopes

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading