Advertisement

Silicon photomultiplier module for low light level detection

October 4, 2012 12:44 pm | Product Releases | Comments

Excelitas Technologies announced the introduction of its new Silicon Photomultiplier (SiPM) Module, under the brand name LynX, expressly designed to meet state-of-the-art analytical measurements needs. The LynX SiPM Module (LynX-A-33-050-T1-A) is a compact, easy-to-use, analogue module based on Excelitas’ new C30742 Series low noise, ultra-fast timing resolution, low cross-talk SiPM chips.

LISTED UNDER: Boards & Modules | Test & Measurement
Advertisement

Microscope comes with a full white light interferometer for non-destructive measurement

October 1, 2012 9:27 am | Product Releases | Comments

FRT MicroScope WLI is the new optical surface measuring system launched by Fries Research & Technology (FRT). Based on an optical microscope, it comes with a full white light interferometer for non-destructive measurement. This enables for quick and easy performing 3D measurements on a surface with very high vertical resolution.

LISTED UNDER: Test & Measurement

Test product designed to support high current demand POL regulator

September 28, 2012 4:06 pm | Product Releases | Comments

Picotest.com has released a new test product designed to support high current demand Point of Load (“POL”) regulators and PDN measurements. The J2112A is a higher current version of the most popular injector product, the J2111A Current Injector. The J2112A offers a greater current range (1A vs. 100mA for the J2111A) while improving rise/fall times down to 10ns and achieving a 40MHz bandwidth.

LISTED UNDER: Test & Measurement

SMU Instrument line adds models for benchtop and R&D applications

September 27, 2012 11:50 am | Keithley Instruments | Product Releases | Comments

For researchers, educators, R&D engineers, and others who must deal with ever-tighter instrumentation budgets, Keithley has added three high value, dual-channel SMUs to the Series 2600B line. The new Models 2604B, 2614B, and 2634B are optimized for

LISTED UNDER: Test & Measurement

High-speed differential probe enables high-voltage oscilloscope measurements

September 25, 2012 4:09 pm | Product Releases | Comments

The Yokogawa Model 701927 is a new high-speed differential probe for high-voltage floating signal measurements, using the company's DLM2000 series of mixed-signal oscilloscopes and other instruments equipped with the Yokogawa probe interface.The 701927 has a 3 dB bandwidth of DC to 150 MHz...

LISTED UNDER: Test & Measurement

Triggering and decoding audio signals with the R&S RTO

September 19, 2012 9:33 am | Product Releases | Comments

I2S, LJ, RJ and TDM are serial buses that implement unidirectional point-to-point connections. They carry digital audio data between ICs and are often used to connect analog-to-digital converters and digital-to-analog converters to digital signal processors (DSP) for audio processing.

LISTED UNDER: Test & Measurement

Agilent Technologies’ waveform generators with new Trueform technology are in stock at Newark element14

September 18, 2012 3:09 pm | Agilent Technologies | Product Releases | Comments

Newark element14, the leading distributor of electronic components and engineering solutions in the Americas and a business of Premier Farnell (LSE:pfl), today announced the availability of Agilent Technologies 33500B Series waveform generators for same-day shipping.

LISTED UNDER: Test & Measurement

Grandmaster clock series provides precise time synchronization of measurement devices

September 11, 2012 12:38 pm | Product Releases | Comments

OMICRON Lab's newly developed antenna-integrated PTP Grandmaster clock OTMC 100 provides precise and simple time synchronization of measurement devices via the Precision Time Protocol (PTP) according to IEEE 1588-2008. The unique design of the OTMC 100 series combines the GPS-Antenna, the GPS receiver and the Grandmaster clock...

LISTED UNDER: RF & Microwave/Communications | Test & Measurement

Compact 150 & 240 watt power supplies feature up to 200% peak power

September 4, 2012 3:38 pm | TDK-Lambda Americas, Inc. | Product Releases | Comments

TDK Corporation announces the new TDK-Lambda ZWS-BP series of compact, open-frame, 150W and 240W power supplies. These single-output supplies have a low profile of 1.46” to 1.65” and compact footprints of 2.95” x 6.3” or 3.31” x 7.09”.  Moreover, these units can provide a peak output power of up to 200% (for motors, pumps, etc.)...

LISTED UNDER: Test & Measurement

Clamp-on process meter measures 0-120 mA DC process control signals without breaking the loop

August 27, 2012 11:09 am | Product Releases | Comments

Yokogawa Corporation of America announced the release of their CL420 Clamp-on Process Meter. The CL420 will safely measure 0-120 mA DC process control signals without breaking the loop. Typical application examples include distributed control systems, programmable logic controllers, pressure and temperature transmitters, and loop powered isolators and indicators.

LISTED UNDER: Test & Measurement

Boundary-scan controller supports PXIe/Compact PCI-express slot format

August 21, 2012 12:12 pm | Product Releases | Comments

JTAG Technologies announces a further extension to its line of high-performance boundary-scan IEEE Std. 1149.1 controllers. Known as the DataBlaster JT 37x7/PXIe the new unit offers support for the increasingly popular PXIe/Compact PCI-express slot format that now features in some of the latest Automatic Test Equipment based on the PXI(e) standards.

LISTED UNDER: Test & Measurement

Relays ideal for test and measurement, medical applications

August 20, 2012 2:28 pm | Product Releases | Comments

Standex-Meder Electronics announces its CRF series of instrumentation grade reed relays. CRF Series relays are the smallest in the industry, at only 3.4 mm high, and come equipped with an internal

LISTED UNDER: Sensors & Actuators | Test & Measurement

Test interface adapters improve power supply, noise, EMI, and PDN testing accuracy

August 20, 2012 12:34 pm | Tektronix | Product Releases | Comments

Picotest.com has released three new Signal Injectors, adding to its already industry leading lineup of test adapters. The three new Signal Injectors include the J2180A 0.1Hz -100MHz Ultra Low Noise Preamplifier (now with CE Approval), the J2102A Common Mode Transformer (PDN, ground loop), the J2112A High Current Output (1A) Current Injector and the J2190A 0.1Hz-10Hz Active Filter.

LISTED UNDER: Test & Measurement

Test instruments offer cost-effective, non-intrusive way to increase test coverage

August 9, 2012 10:42 am | Product Releases | Comments

ASSET InterTech has added two new memory test instruments to its ScanWorks embedded instrumentation library for its FPGA-controlled test (FCT) circuit board test tool, giving electronics manufacturers a cost-effective non-intrusive means of increasing test coverag

LISTED UNDER: Test & Measurement

Automated test software will help reduce time to market

August 6, 2012 9:03 am | Tektronix | Product Releases | Comments

Tektronix, Inc. announced automated test software for Serial Attached SCSI (SAS) physical-layer transmitter conformance testing that now includes measurement support for SAS-3 12 Gbps interfaces. Using DPO/DSA/MSO70000 Series  oscilloscopes with real time sampling rates up to 100 GS/s on two channels at 33 GHz bandwidth along with DPOJET-based automated conformance test software engineers can gain deep insights into critical SAS-3 design challenges.

LISTED UNDER: Test & Measurement

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading