Advertisement

USB 3.0 test tools include a transmitter test solution for the SuperSpeedPlus 10 Gb/s specification

June 25, 2013 3:35 pm | Tektronix | Product Releases | Comments

Tektronix, Inc. announced a series of enhancements to its USB 3.0 test solutions including a transmitter test solution for the SuperSpeedPlus 10 Gb/s specification (option SSP). Other enhancements include a new USB 3.0 oscilloscope-based layered decode capability and an enhanced

LISTED UNDER: Test Instrumentation | Oscilloscopes

DC panel-mount voltmeter suits battery monitoring

June 21, 2013 10:29 am | Murata Power Solutions Inc. | Product Releases | Comments

Murata announced the compact DMR20-10-DCM "nanoMeter" self-powered auto-ranging DC voltmeter designed for mounting in an industry-standard "oiltight" 30 and 30.5 mm / 1.2 inch round panel cutout. Occupying minimal space, the round voltmeter has a 7.6mm / 0.3 inch four-digit LED display and is self-powered.

LISTED UNDER: Meters | Digital Multimeter

Function generator line provides output voltages from 0 to 10 Vpp into 50 ohms

June 19, 2013 3:35 pm | B&K Precision Corporation | Product Releases | Comments

B&K Precision announced the addition of three new DDS (direct digital synthesis) sweep function generator models: 4014B, 4040B, and 4045B. All models generate stable and precise sine, square, and triangle waveforms, and provide output voltages from 0 to 10 Vpp into 50 ohms or 20 Vpp into open circuit.

LISTED UNDER: Meters
Advertisement

AC temperature controller features easy-to-use software and data retrieval capabilities

June 7, 2013 1:22 pm | Oven Industries, Inc. | Product Releases | Comments

Oven Industries announces the new 5R1-1400 AC Temperature Controller with the integrated potentiometers or via a PC through the TTL level UART Communication port. This compact design measuring two and one half inches square can deliver up to 15 AMPS of load current from a zero voltage switched, low-noise, solid-state relay.

LISTED UNDER: Temperature

Digital AC/DC power supply targets prototyping, education

June 5, 2013 12:02 pm | Global Specialties | Product Releases | Comments

Global Specialties’ 1315D is designed for educational use and prototyping, covering a wide range of circuit testing applications. This simple AC/DC power source can be used to demonstrate the concept of alternating and non-alternating voltages. It can also be used for simple

LISTED UNDER: Current Meters | Resistor

Compact datalogger includes wireless connectivity based on GSM/GPRS module

June 5, 2013 10:34 am | Telit Wireless Solutions | Product Releases | Comments

Telit Wireless Solutions and Danlaw Incorporated announced that Danlaw’s DL750 includes Telit’s ultra-compact GSM/GPRS cellular module, the GE865-QUAD. The product is a self-contained consumer installable data collection device. Danlaw and Telit who cooperated in a number of products before, are

LISTED UNDER: Data Acquisition | Data Loggers

Sensor node enables wireless energy monitoring via any web-connected device

June 5, 2013 9:49 am | Microstrain, Inc. | Product Releases | Comments

LORD MicroStrain Sensing Systems introduced Watt-Link, a wireless sensor node positioned to streamline discrete industrial power installations and provide remote energy monitoring and reporting via any web-connected device. Applications include energy management, building automation,

LISTED UNDER: Meters

Over-the-air test system enables industry’s first 802.11n WLAN over-the-air measurements

May 23, 2013 3:28 pm | Rohde & Schwarz | Product Releases | Comments

CETECOM has selected Rohde & Schwarz (R&S) to enhance their over-the-air (OTA) testing capabilities with a new test system that includes LTE multiple-input, multiple-output (MIMO) and 802.11n functionality. The TS8991 test system can perform OTA measurements for LTE MIMO in addition to all cellular 2G, 3G, and 4G technology standards.

LISTED UNDER: Frequency
Advertisement

End-to-end test solution analyzes IP-based applications

May 23, 2013 11:05 am | Rohde & Schwarz | Product Releases | Comments

Rohde & Schwarz has developed the world's first integrated end-to-end test solution that examines the impact applications have on smartphones and the network using IP and protocol statistical analysis. Equipped with the new R&S CMW-KM051 option, the R&S CMW500 wideband radio communication tester can comprehensively analyze and test IP-based applications....

LISTED UNDER: RF/Microwave

Digital multimeter features ultra-competitive price

May 14, 2013 4:15 pm | Product Releases | Comments

Rigol Technologies introduces the DM3058E digital multimeter, designed with 5 ½ digits resolution and dual-display at an industry-leading price of $449. As the first 5 ½ digit digital DMM in the industry to be LXI certified, the DM3058E can also enable system integration, fitting the needs of high-precision, multifunction and automatic measurement applications.

LISTED UNDER: Meters

Test leads assess lightning protection in wind turbine blades

May 14, 2013 4:03 pm | Product Releases | Comments

Megger now offer a new series of test leads for use with wind turbines. The unique KC series are long enough to be used for assessing the continuity of lightning protection conductors in wind turbine blades. Developed and designed in conjunction with key wind turbine manufacturers, the KC series is the first commercially available product of its kind to have been specifically designed for wind turbine applications.

LISTED UNDER: Environmental

Instrument determines night visibility and day visibility of road markings

May 14, 2013 10:19 am | Product Releases | Comments

The ZRM 6006 is a simple-to-use, budget-priced, entry level, compact instrument for determination of night visibility (RL) and day visibility (Qd) of road markings as well as ambient temperature (°C/°F) and relative humidity (rH%) combined in one compact instrument. Apart from the power switch there is only a large measuring button.

LISTED UNDER: Temperature

USB Picoammeter’s sync feature offers desirable low DC current measurements

May 8, 2013 10:21 am | Product Releases | Comments

RBD’s 9103 USB picoammeter is designed to provide reliable and accurate bipolar DC current measurements in the range of picoamps to milliamps. A simple ASCII-based command structure enables users to quickly incorporate the 9103 into their own custom software application.

LISTED UNDER: Data Loggers

Vector signal generator creates complex multichannel scenarios for highest demands

May 1, 2013 3:09 pm | Rohde & Schwarz | Product Releases | Comments

The R&S SMW200A high-performance vector signal generator from Rohde & Schwarz enables faster time-to-market, improves end-device quality, and exceeds important 2G, 3G and 4G digital standards and applications. Featuring versatile configuration options...

LISTED UNDER: Signal Generator

Universal PLD test system can perform boundary scan IC and board tests

April 30, 2013 12:27 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company has introduced the JTAGMaster Tester/Programmer, an integrated solution for testing and configuring Programmable Logic Devices (PLDs). JTAGMaster can perform boundary scan IC and board tests, as well as programming JTAG-compatible IC and EEPROMs using external adapters.

LISTED UNDER: IC

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading