Single Platform Emulation and Conformance-Test Software

July 10, 2007 11:56 am | Keysight Technologies | Product Releases | Comments

Agilent Technologies, Inc. announces its single platform protocol emulation and conformance testing of bidirectional forwarding detection (BFD). The N2X multi-services test software ensured that routers conform to the new IETF BFD recommendations and meet scalability requirements.

LISTED UNDER: Test & Measurement

Simulator with Robotic Mechanism Performs Air-Discharge Testing

June 28, 2007 10:31 am | Product Releases | Comments

Teseq Inc. announced the NSG 439, an ESD generator that comes with a robotic air discharge adapter accessory and is used for the ESD testing of operating controls, peripheral devices and multi-way connectors affected by increasingly comprehensive product standards. The devices compact housing was designed for use in harsh robotic environments and withstands the high-velocity robotic maneuvers that occur during test procedures. The robot attachment can be positioned on multiple faces of the housing and networks can be exchanged by

LISTED UNDER: Test & Measurement

GPS Receiver

June 25, 2007 7:23 am | Product Releases | Comments

United Electronic Industries (UEI) announced its DNA-GPS GPS receiver system that adds GPS technology to the PowerDNA, UEILogger and UEIPAC data acquisition and control Cubes. The unit provides location, velocity and UTC real time for a variety of mobile and in-vehicle testing applications. The device is built around the Garmin GPS 16-HVS which provides location information with a positional error of 3m in areas served by the WAAS (most of North America) and 15m accuracy worldwide

LISTED UNDER: Test & Measurement

Testing Machines with Intuitive Operation and Support Functions

June 25, 2007 7:03 am | Product Releases | Comments

Shimadzu Scientific Instruments introduces its Autograph AG-X Series of testing machines that deliver increased precision and productivity with intuitive operation and support functions. This product line uses large-capacity load cells and testing jigs for reliable results. It measures loads from 100N to 100 kN using a single load cell, eliminating the need for jig replacements. Necessary data can be captured in a single test while achieving precision within ±0.5 percent with a 1/1000 load cell. Other standard features include 32-bit, 144-mHz MPU, FPGA-controlled synchronized sampling

LISTED UNDER: Test & Measurement

Test Instruments with Expanded Decoding Capabilities

June 25, 2007 6:56 am | Product Releases | Comments

LeCroy announced that UART, RS-232 and LIN trigger and decode capabily for I2C, SPI and CAN are available on all WaveRunner Xi and WaveSurfer Xs mixed signal oscilloscopes. The UART and RS-232 system provides the ability to trigger and decode both RS-232 and generic UART signals. The LIN trigger and decode system provides full support of LIN 1.3, 2.0 and J2602.

LISTED UNDER: Test & Measurement

Signal Analyzer Offers Instrument Security

June 25, 2007 6:42 am | Keysight Technologies | Product Releases | Comments

Agilent Technologies announced enhancements to its N9020A MXA signal analyzer which include the ability to create complete instrument security via CPU and hard disk drive (HDD) removal. Also featuring a phase-noise measurement application, MATLAB drivers, time gating and an enhanced 802.16 OFDMA

LISTED UNDER: Test & Measurement

PC Board Testing Kit

June 19, 2007 9:49 am | Product Releases | Comments

Components Corporation announced the availability of a free engineering sample kit. Featuring 100% RoHS-compliant parts representing those most frequently requested by designers for in-circuit evaluation, the kit provides 21 specific samples of test points and jumpers, along with fuse clips, and battery contacts. The multi-compartment box contains standard, low-, and ultra-low profile devices, as well as surface-mount, and thru-hole parts to help ensure

LISTED UNDER: Test & Measurement

Multiport Test Adapter Enables Complete MIMO Testing on Current One-Box Testers

June 1, 2007 6:34 am | Product Releases | Comments

LitePoint Corporation announced their Multiport Test Adapter (MPTA) which enables both industry standard composite EVM along with fast-switching test methodologies allowing multi-channel MIMO devices to be accurately and comprehensively tested on existing, low-cost one-box test instruments. The test adapter's wide operating range (2 GHz to 6 GHz) addresses

LISTED UNDER: Test & Measurement

Heavy-Duty Digital Multimeters for Harsh Environments

May 30, 2007 6:40 am | Product Releases | Comments

Amprobe Test Tools' HD160C and HD110C Heavy-Duty Digital Multimeters (DMM) are designed for professional use in harsh environments. The IP67-rated DMMs are constructed to

LISTED UNDER: Test & Measurement

Clock Recovery Instrument for High-Speed Electrical Serial Data Testing

May 22, 2007 5:53 am | Tektronix | Product Releases | Comments

Tektronix has entered into an OEM agreement with SyntheSys Research to offer an advanced clock recovery instrument. The Tektronix 80A07 BERTScope CR provides flexible clock recovery capabilities for stressed or degraded signals, and it is designed to make compliance testing of today’s high-speed serial data designs easy and accurate. When used with a Tektronix DSA8200 sampling oscilloscope system, the 80A07 will make serial data characterization and compliance testing simple

LISTED UNDER: Test & Measurement

PXI Solid State Multiplexers

May 22, 2007 5:50 am | Product Releases | Comments

Pickering Interfaces is expanding its range of PXI switching modules with the introduction of a range of high density solid state multiplexers. Applications include switching DMMs for four terminal resistor measurements or as an input switch to data acquisition systems. The 40-680 is available in a choice of configurations ranging from a 160-channel single bank multiplexer, a 20-bank eight-channel multiplexer to a four-pole 40-channel multiplexer

LISTED UNDER: Test & Measurement

Next Generation Software for Cable Test System

May 22, 2007 5:48 am | Product Releases | Comments

A software upgrade has been released by CAMI Research for the CableEye cable and wire harness tester. The new software displays multiple, independent connector graphics with live video graphics to help easily visualize complex wiring. Users may drag connector images to the desired position on the left or

LISTED UNDER: Test & Measurement

Nineteen I/O Modules and Datalogging Software Added to Data Acquisition Platform

May 22, 2007 5:45 am | Product Releases | Comments

National Instruments nearly tripled the number of I/O modules available for NI CompactDAQ, adding several key measurements and capabilities to the USB-based modular data acquisition system. Additionally, every CompactDAQ chassis is shipped with the company’s LabVIEW SignalExpress data-logging software

LISTED UNDER: Test & Measurement

Signal Source Analyzer with 10X Throughput Over Its Predecessor

May 22, 2007 5:43 am | Keysight Technologies | Product Releases | Comments

Agilent Technologies introduced an enhanced model of what is said to be the world's fastest signal source analyzer, the Agilent E5052A. It features a tenfold improvement in measurement throughput and more precise analysis functions than its predecessor, as well as desirable performance in clock jitter measurement with a very low jitter noise floor

LISTED UNDER: Test & Measurement

System Monitor Eyes “Feel-good Data”

May 22, 2007 5:41 am | Product Releases | Comments

The new system monitor from Elma monitors and controls power supply voltages, temperatures and fan speed values. After the associated Eurocard (3U, 100 mm × 160 mm) has been integrated in the system, it can be accessed from anywhere in the world via the Internet and instructed to carry out commands. Owing to its platform independence, the unit can monitor VME, VME64x and CompactPCI. As it is designed as an open system, users can

LISTED UNDER: Test & Measurement


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.