Advertisement

Sampling Oscilloscope Probes Second Generation PCI Express, Serial ATA, XAUI and 10 Gigabit Ethernet

July 10, 2007 12:49 pm | Product Releases | Comments

LeCroy Corporation introduces WaveExpert 100H, said to be the first sampling oscilloscope capable of acquiring, measuring and processing signals that cannot be physically probed. It addresses the analysis and compliance requirements of the long serial data patterns required by standards such as second generation PCI Express, serial ATA, XAUI and 10 Gigabit Ethernet. The modular architecture supports up to four optical or electrical channels with bandwidths up to 100 GHz, as well as

LISTED UNDER: Test & Measurement
Advertisement

High-Flow Temperature Forcing System

July 10, 2007 12:28 pm | Product Releases | Comments

Thermonics, Inc. announces the T-2500HFE precision temperature forcing system (PTFS) that provides increased air flow to control temperatures of high power electronic components and parallel component testing. The system controls device temperatures with power consumption of up to 140W to within ±1°C.

LISTED UNDER: Test & Measurement

Digital Power Meters

July 10, 2007 12:22 pm | Product Releases | Comments

Chroma ATE, Inc. announces its series 66200 digital power meter that is designed for accurate AC power measurements. The internal 16-bit analog/digital converters provide high speed sampling rates up to 240 KHz. In addition to standard power measurements, these power meters include inrush current, total harmonic Distortion of V/I and energy measurements.

LISTED UNDER: Test & Measurement

Temperature Meter with Audible Buzzer

July 10, 2007 12:18 pm | Product Releases | Comments

Omega Engineering introduces its DP7000 temperature meter that offers a wide temperature range, two selectable alarm settings and an internal buzzer that indicates alarm condition or error. The user can define set-point, ON/OFF heating/cooling regulation, alarm configuration, load status and ambient probe adjustment.

LISTED UNDER: Test & Measurement

Calibration Software Enhances RF Device Accuracy

July 10, 2007 12:12 pm | Product Releases | Comments

Cascade Microtech announces its WinCal XE calibration software to help semiconductor labs create more accurate high-frequency RF device models. The 16-term calibration eliminates certain undesired measurement parasitic effects, thus enabling more accurate device models and shorter design cycle times. Its flexible design and open architecture allow innovations and capabilities to be added quickly to the software.

LISTED UNDER: Test & Measurement

Data Acquisition Box for Harsh Applications

July 10, 2007 12:05 pm | Product Releases | Comments

Hacker-DatenTechnik announces its MF16080-T series of small portable USB data acquisition boxes with an extended temperature range of -40°C to +105°C that are usable for a range of industrial, offshore and military applications. For OEM applications the inside PCB is also available separately with an extended temperature range of -40°C to +120°C.

LISTED UNDER: Test & Measurement

Single Platform Emulation and Conformance-Test Software

July 10, 2007 11:56 am | Agilent Technologies | Product Releases | Comments

Agilent Technologies, Inc. announces its single platform protocol emulation and conformance testing of bidirectional forwarding detection (BFD). The N2X multi-services test software ensured that routers conform to the new IETF BFD recommendations and meet scalability requirements.

LISTED UNDER: Test & Measurement

Simulator with Robotic Mechanism Performs Air-Discharge Testing

June 28, 2007 10:31 am | Product Releases | Comments

Teseq Inc. announced the NSG 439, an ESD generator that comes with a robotic air discharge adapter accessory and is used for the ESD testing of operating controls, peripheral devices and multi-way connectors affected by increasingly comprehensive product standards. The devices compact housing was designed for use in harsh robotic environments and withstands the high-velocity robotic maneuvers that occur during test procedures. The robot attachment can be positioned on multiple faces of the housing and networks can be exchanged by

LISTED UNDER: Test & Measurement

GPS Receiver

June 25, 2007 7:23 am | Product Releases | Comments

United Electronic Industries (UEI) announced its DNA-GPS GPS receiver system that adds GPS technology to the PowerDNA, UEILogger and UEIPAC data acquisition and control Cubes. The unit provides location, velocity and UTC real time for a variety of mobile and in-vehicle testing applications. The device is built around the Garmin GPS 16-HVS which provides location information with a positional error of 3m in areas served by the WAAS (most of North America) and 15m accuracy worldwide

LISTED UNDER: Test & Measurement

Testing Machines with Intuitive Operation and Support Functions

June 25, 2007 7:03 am | Product Releases | Comments

Shimadzu Scientific Instruments introduces its Autograph AG-X Series of testing machines that deliver increased precision and productivity with intuitive operation and support functions. This product line uses large-capacity load cells and testing jigs for reliable results. It measures loads from 100N to 100 kN using a single load cell, eliminating the need for jig replacements. Necessary data can be captured in a single test while achieving precision within ±0.5 percent with a 1/1000 load cell. Other standard features include 32-bit, 144-mHz MPU, FPGA-controlled synchronized sampling

LISTED UNDER: Test & Measurement

Test Instruments with Expanded Decoding Capabilities

June 25, 2007 6:56 am | Product Releases | Comments

LeCroy announced that UART, RS-232 and LIN trigger and decode capabily for I2C, SPI and CAN are available on all WaveRunner Xi and WaveSurfer Xs mixed signal oscilloscopes. The UART and RS-232 system provides the ability to trigger and decode both RS-232 and generic UART signals. The LIN trigger and decode system provides full support of LIN 1.3, 2.0 and J2602.

LISTED UNDER: Test & Measurement

Signal Analyzer Offers Instrument Security

June 25, 2007 6:42 am | Agilent Technologies | Product Releases | Comments

Agilent Technologies announced enhancements to its N9020A MXA signal analyzer which include the ability to create complete instrument security via CPU and hard disk drive (HDD) removal. Also featuring a phase-noise measurement application, MATLAB drivers, time gating and an enhanced 802.16 OFDMA

LISTED UNDER: Test & Measurement

PC Board Testing Kit

June 19, 2007 9:49 am | Product Releases | Comments

Components Corporation announced the availability of a free engineering sample kit. Featuring 100% RoHS-compliant parts representing those most frequently requested by designers for in-circuit evaluation, the kit provides 21 specific samples of test points and jumpers, along with fuse clips, and battery contacts. The multi-compartment box contains standard, low-, and ultra-low profile devices, as well as surface-mount, and thru-hole parts to help ensure

LISTED UNDER: Test & Measurement

Multiport Test Adapter Enables Complete MIMO Testing on Current One-Box Testers

June 1, 2007 6:34 am | Product Releases | Comments

LitePoint Corporation announced their Multiport Test Adapter (MPTA) which enables both industry standard composite EVM along with fast-switching test methodologies allowing multi-channel MIMO devices to be accurately and comprehensively tested on existing, low-cost one-box test instruments. The test adapter's wide operating range (2 GHz to 6 GHz) addresses

LISTED UNDER: Test & Measurement

Heavy-Duty Digital Multimeters for Harsh Environments

May 30, 2007 6:40 am | Product Releases | Comments

Amprobe Test Tools' HD160C and HD110C Heavy-Duty Digital Multimeters (DMM) are designed for professional use in harsh environments. The IP67-rated DMMs are constructed to

LISTED UNDER: Test & Measurement

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading