Advertisement

MSOs tout enhanced mixed signal performance, probing capability to 33 GHz

July 23, 2013 12:14 pm | Tektronix | Product Releases | Comments

Tektronix, Inc introduced the new MSO/DPO70000DX Series of performance oscilloscopes that feature models with 23-GHz, 25-GHz, and 33-GHz bandwidth and enhanced tools for debugging digital and analog circuits. The new MSO70000DX instruments provide

LISTED UNDER: Oscilloscopes

USB-controlled digital attenuator spans a frequency range of 100MHz to 13GHz

July 9, 2013 4:28 pm | Rfmw Ltd | Product Releases | Comments

RFMW, Ltd. announces application and sales support for the Telemakus, LLC TEA13000-12 USB Controlled Digital Attenuator. The TEA13000-12 is used in bench top test or ATE applications and spans a frequency range of 100MHz to 13GHz.

LISTED UNDER: Digital | Digital

Analog front end uses up to 20 percent less power than competing solutions

July 9, 2013 2:03 pm | Product Releases | Comments

Mouser Electronics is now stocking the Analog Devices low-power, single-lead, heart-rate monitor analog front end (AFE) (AD8232) for a wide range of vital sign monitoring applications. The Analog Devices AD8232 low power heart-rate monitor AFE is 50 percent smaller and uses up to 20 percent less power than competing solutions.

LISTED UNDER: Digital
Advertisement

USB Latching 8 Amp relay Module Model RSB2084

June 26, 2013 9:26 pm | J-Works, Inc. | Products

RSB2084 series of 8 Amp Latching SPST relay modules controlled over the USB. The relays are rated at 8A @ 250VAC Wire connection to the relay module are made with on-board screw type terminals and controlled by USB commands. A "latching relay' has two relaxed states (bistable). These relays are called 'impulse', "keep" or "stay" types. When the power is switched off the relays, the relay remains in its last state. The relay retains the last state during any power outages, and will only switch when command to by the host PC. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications.

LISTED UNDER: Computer | Embedded | Industrial

USB 3.0 test tools include a transmitter test solution for the SuperSpeedPlus 10 Gb/s specification

June 25, 2013 3:35 pm | Tektronix | Product Releases | Comments

Tektronix, Inc. announced a series of enhancements to its USB 3.0 test solutions including a transmitter test solution for the SuperSpeedPlus 10 Gb/s specification (option SSP). Other enhancements include a new USB 3.0 oscilloscope-based layered decode capability and an enhanced

LISTED UNDER: Test Instrumentation | Oscilloscopes

DC panel-mount voltmeter suits battery monitoring

June 21, 2013 10:29 am | Murata Power Solutions Inc. | Product Releases | Comments

Murata announced the compact DMR20-10-DCM "nanoMeter" self-powered auto-ranging DC voltmeter designed for mounting in an industry-standard "oiltight" 30 and 30.5 mm / 1.2 inch round panel cutout. Occupying minimal space, the round voltmeter has a 7.6mm / 0.3 inch four-digit LED display and is self-powered.

LISTED UNDER: Meters | Digital Multimeter

Function generator line provides output voltages from 0 to 10 Vpp into 50 ohms

June 19, 2013 3:35 pm | B&K Precision Corporation | Product Releases | Comments

B&K Precision announced the addition of three new DDS (direct digital synthesis) sweep function generator models: 4014B, 4040B, and 4045B. All models generate stable and precise sine, square, and triangle waveforms, and provide output voltages from 0 to 10 Vpp into 50 ohms or 20 Vpp into open circuit.

LISTED UNDER: Meters

AC temperature controller features easy-to-use software and data retrieval capabilities

June 7, 2013 1:22 pm | Oven Industries, Inc. | Product Releases | Comments

Oven Industries announces the new 5R1-1400 AC Temperature Controller with the integrated potentiometers or via a PC through the TTL level UART Communication port. This compact design measuring two and one half inches square can deliver up to 15 AMPS of load current from a zero voltage switched, low-noise, solid-state relay.

LISTED UNDER: Temperature
Advertisement

Digital AC/DC power supply targets prototyping, education

June 5, 2013 12:02 pm | Global Specialties | Product Releases | Comments

Global Specialties’ 1315D is designed for educational use and prototyping, covering a wide range of circuit testing applications. This simple AC/DC power source can be used to demonstrate the concept of alternating and non-alternating voltages. It can also be used for simple

LISTED UNDER: Current Meters | Resistor

Compact datalogger includes wireless connectivity based on GSM/GPRS module

June 5, 2013 10:34 am | Telit Wireless Solutions | Product Releases | Comments

Telit Wireless Solutions and Danlaw Incorporated announced that Danlaw’s DL750 includes Telit’s ultra-compact GSM/GPRS cellular module, the GE865-QUAD. The product is a self-contained consumer installable data collection device. Danlaw and Telit who cooperated in a number of products before, are

LISTED UNDER: Data Acquisition | Data Loggers

Sensor node enables wireless energy monitoring via any web-connected device

June 5, 2013 9:49 am | Microstrain, Inc. | Product Releases | Comments

LORD MicroStrain Sensing Systems introduced Watt-Link, a wireless sensor node positioned to streamline discrete industrial power installations and provide remote energy monitoring and reporting via any web-connected device. Applications include energy management, building automation,

LISTED UNDER: Meters

Over-the-air test system enables industry’s first 802.11n WLAN over-the-air measurements

May 23, 2013 3:28 pm | Rohde & Schwarz | Product Releases | Comments

CETECOM has selected Rohde & Schwarz (R&S) to enhance their over-the-air (OTA) testing capabilities with a new test system that includes LTE multiple-input, multiple-output (MIMO) and 802.11n functionality. The TS8991 test system can perform OTA measurements for LTE MIMO in addition to all cellular 2G, 3G, and 4G technology standards.

LISTED UNDER: Frequency

End-to-end test solution analyzes IP-based applications

May 23, 2013 11:05 am | Rohde & Schwarz | Product Releases | Comments

Rohde & Schwarz has developed the world's first integrated end-to-end test solution that examines the impact applications have on smartphones and the network using IP and protocol statistical analysis. Equipped with the new R&S CMW-KM051 option, the R&S CMW500 wideband radio communication tester can comprehensively analyze and test IP-based applications....

LISTED UNDER: RF/Microwave

Digital multimeter features ultra-competitive price

May 14, 2013 4:15 pm | Product Releases | Comments

Rigol Technologies introduces the DM3058E digital multimeter, designed with 5 ½ digits resolution and dual-display at an industry-leading price of $449. As the first 5 ½ digit digital DMM in the industry to be LXI certified, the DM3058E can also enable system integration, fitting the needs of high-precision, multifunction and automatic measurement applications.

LISTED UNDER: Meters

Test leads assess lightning protection in wind turbine blades

May 14, 2013 4:03 pm | Product Releases | Comments

Megger now offer a new series of test leads for use with wind turbines. The unique KC series are long enough to be used for assessing the continuity of lightning protection conductors in wind turbine blades. Developed and designed in conjunction with key wind turbine manufacturers, the KC series is the first commercially available product of its kind to have been specifically designed for wind turbine applications.

LISTED UNDER: Environmental

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading