Advertisement

Handheld Meter Measures Magnetic Fields

May 15, 2008 11:38 am | Product Releases | Comments

Created to measure the electromagnetic fields of extremely low frequency (30 to 300Hz) devices such as electric transmission equipment, microwave ovens, air conditioners, computer monitors, and video/audio devices, the HHG191 Gauss meter from Omega Engineering represents allows measurements up to 2,000 mG to 200 micro-tesla with a basic accuracy of 2.5% + 6-digit.

LISTED UNDER: Test & Measurement

Test Points Offered in 10 Colors

May 13, 2008 4:36 am | Product Releases | Comments

Intended to replace wire-wrap posts and turret terminals, a family of test points are available in 10 colors for use on 0.062 and 0.093 PCBs. Made of phosphor bronze with silver plating, the points are designed to keep onboard terminals perpendicular to the PCB and are available in 0.010" diameter miniature versions and 0.015" compact and multi-purpose versions.

LISTED UNDER: Test & Measurement

Handheld, 1g Shaker Performs On-site Troubleshooting, Sensor Calibration and Performance Verification

May 7, 2008 9:02 am | Product Releases | Comments

The IMI Sensors division of PCB Piezotronics (PCB) has released the Model 699A02 portable, lightweight, battery powered industrial handheld shaker. It is designed to verify accelerometer and vibration system performance, as well as confirm the operation of interconnecting cables, switching devices and monitoring systems. The unit operates at 159.2 Hz and delivers a controlled, 1g rms or 1g  peak acceleration to

LISTED UNDER: Sensors & Actuators | Test & Measurement
Advertisement

Tester Evaluates Embedded USB Host Devices

May 2, 2008 9:31 am | Product Releases | Comments

Ensuring compliance with USB-IF host certification standards, the USBHost Tester from Jungo tests embedded USB host stacks against the profiles of the thousands of commonly used USB devices in its database. Able to simulate entire class descriptors, the device also has a reporting facility. The tester can be used in a project along with the company's WinDriver development toolkit for custom device drivers to run on a variety  of operating systems and

LISTED UNDER: Test & Measurement

Portable High-Speed Data Recorder Boasts 20 Channel Recording System

April 30, 2008 5:30 am | Product Releases | Comments

Astro-Med’s Test & Measurement Product Group introduced the Dash 20HF high frequency data recorder family. . The unit supports recording up to 20 analog channels to an internal hard drive at sample rates of up to 500 kHz and a bandwidth of 100 kHz per channel. The system is built into a 16” × 12.125” × 6.628” case and equipped with a 15” diagonal monitor for intuitive touch-screen control and real-time data viewing and analysis.

LISTED UNDER: Test & Measurement

LabVIEW Module Supports ARM Microcontrollers

April 25, 2008 6:37 am | Product Releases | Comments

Presented as an extension of the LabVIEW graphical system design platform, the NI LabVIEW Embedded Module for ARM Microcontrollers directly supports the ARM 7, ARM 9 and Cortex-M3 microcontroller families. The module can create embedded applications and deploy them with drivers that enable domain experts to graphically program all components of the ARM microcontroller including the analog and digital I/O.

LISTED UNDER: Test & Measurement

Software Verifies Compliance with DO-178B, IEC-61508, and MAAB Modeling Standards

April 24, 2008 8:02 am | Product Releases | Comments

The MathWorks announced that its Simulink verification and validation software automatically evaluates and verifies system models for compliance with DO-178B and IEC-61508 standards and MAAB modeling guidelines, which have been extensively adopted by international aerospace, automotive, and industrial equipment markets, among others. The model-checking features

LISTED UNDER: Software | Test & Measurement

PXI Embedded Controllers Perform in Value-based Test, Measurement and Control Applications

April 23, 2008 8:21 am | Product Releases | Comments

National Instruments introduced two embedded controllers – the PXI-8104 and PXI-8183 – intended for value-based test, measurement, and control applications across the consumer electronics, automotive, semiconductor, telecommunications, and aerospace and defense industries.

LISTED UNDER: Boards & Modules | Test & Measurement
Advertisement

Handheld Multimeter Delivers Voice Output

April 23, 2008 5:54 am | Product Releases | Comments

The OMEGASAYS UV1000, from Omega Engineering, measures 0V DC to 10V DC voltage, 0 mA to 20 mA current, and Type K thermocouple inputs and verbalizes them in any range with over 100 built-in Engineering units. The device is battery powered and equipped with RS232 PC interface that allows configuration of the verbalizer for input range, engineering units, and high and low alarm set points. Front keypad allows input

LISTED UNDER: Test & Measurement

Oscilloscopes Provide Triggering, Decode Support for Serial Buses In Embedded Systems

April 22, 2008 6:28 am | Tektronix | Product Releases | Comments

Tektronix announced the availability of the DPO3000 Digital Phosphor Oscilloscopes (DPOs), a portable series of models that provides triggering and decode support for popular serial buses used in embedded design applications. They offer 5M standard record length and use the

LISTED UNDER: Test & Measurement

Signal Conditioner with Automatic Zero Adjustment Eliminates Sensor’s Inherent DC Offset Voltage

April 14, 2008 11:38 am | Product Releases | Comments

PCB Piezotronics introduced Model 478A30, a three-channel DC sensor signal conditioner with selectable gain. This model is designed to be compatible with new Series 3991/3993 high amplitude 20,000g MEMS DC response shock accelerometers, and providing the end user with

LISTED UNDER: Test & Measurement

Radio Communication Analyzers Test High Data Rate

April 4, 2008 6:45 am | Product Releases | Comments

Anritsu Company introduced its HSDPA high data rate and W-CDMA Band XI test options for its MT8820B/MT8815B radio communication analyzers to create single-instrument systems for testing next-generation high data rates and Tx/Rx characteristics. Advantages include faster measuring times, one-touch operation, high-level signaling and high performance for designers and manufacturers of HSPDA and W-CDMA mobile devices who need to quickly verify performance.

LISTED UNDER: Test & Measurement

Data Logger Features a Flexible Probe

April 4, 2008 6:41 am | Product Releases | Comments

Omega Engineering, Inc. announced its Model OM-CP-HITEMP-150FP small, rugged, reusable temperature data logger for deployment in harsh environments. This data logger comes standard with a flexible silicone rubber cable, penetration style stainless steel probe and a stainless steel body. It features a programmable start time, real time operation and an extended temperature range. Data analysis is easy by using the accompanying Windows software, and NIST Calibration certificates are available.

LISTED UNDER: Test & Measurement

Test System Measures Passive Intermodulation

April 4, 2008 6:37 am | Product Releases | Comments

Boonton, a Wireless Telecom Group company, introduced its PIM 20 ultra portable test system for passive intermodulation. Its design provides a rugged, reliable tool for RF field technicians. The device is battery-driven and self-calibrating. When connected to a component or system, users can read the measurement value (dBc) directly from the display, follow the LED bar that turns red if too high of a PIM value is measured, or they can connect it to a device like a Walkie-Talkie to listen remotely if PIM values change when altering components (e.g. tap test).

LISTED UNDER: Test & Measurement

High Accuracy Resistance Temperature Detector Simulator

April 4, 2008 6:31 am | Product Releases | Comments

Pickering Interfaces introduced its Model 40-262 high accuracy resistance temperature detector simulator that is an 18-channel variable resistor module designed to simulate the operation of PT100 and PT1000 RTDs with resolution and accuracy in the PXI form factor. The detector provides an accuracy of more than 0.1 percent for all resistance settings, allowing RTDs to be simulated with accuracy. It uses a design principal that combines fine and coarse control mechanisms in combination with a calibration system to achieve its performance.

LISTED UNDER: Test & Measurement

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading