Temperature Transmitters Offer Sensor Calibration and Backup Redundancy

September 15, 2008 9:36 am | Product Releases | Comments

Operating in 2 Platinum 100 resistance thermometers with 3-wire connections, ABB Instrumentation’s TTH300 head-mounted and TTF300 field-mounted HART temperature transmitters offer sensor calibration and backup redundancy. The components make sensor adjustments based on 1- or 2-point calibration and linearization via the Callendar van

LISTED UNDER: Test & Measurement

Signal Analyzer Operates Over 40 MHz Analysis Bandwidth

September 15, 2008 9:31 am | Product Releases | Comments

Covering wireless standards from 3GPP LTE to WLAN 802.11n, Rohde & Schwarz’s R&S FSV mid-range signal analyzer performs over an analysis bandwidth of 40 MHz in frequency ranges from 9 kHz to 3.6 and 7 GHz, depending on model. The device offers a remote

LISTED UNDER: Test & Measurement

Scanning Software Performs in WiMAX Drive Test

September 15, 2008 8:23 am | Keysight Technologies | Product Releases | Comments

Utilizing option E6474-655, Agilent Technologies’ E6474A Release 12.0 scanning mode software enables a standard WiMAX PC card (CPE) to become a handheld scanning solution for WiMAX Drive Test. The program offers dedicated RF measurements on up to 10 channels with to report Preamble Index Decode, BSID

LISTED UNDER: Test & Measurement

Light Meters Measure Relative Intensity

September 12, 2008 10:36 am | Product Releases | Comments

Performing radiometric analysis, Ocean Optics’ Jaz stackable, modular and autonomous light meters show relative intensity measurements of LEDs, OLEDs, flat panel displays and UV curing and fluorescent lamps. The devices capture, process and store full spectra, and can transfer the spectra to a laptop or desktop PC for calculating color

LISTED UNDER: Test & Measurement

Data Logger Uses USB Interface

September 12, 2008 7:58 am | Product Releases | Comments

Working with the MICROLAB-LITE software, Omega Engineering’s OM-MICROLITE pocket-sized data logger monitors and records temperature using a USB interface. The CE-marked device displays information on a numeric

LISTED UNDER: Test & Measurement

Test Instruments Operate on RF MIMO Platform

September 11, 2008 11:46 am | Keithley Instruments | Product Releases | Comments

Keithley Instruments’ Model 2820 RF vector signal analyzers and Model 2920 RF vector signal generators and Model 2895 MIMO synchronization unit provide support for MIMO research applications ranging from 2 to 8 channels. The devices exhibit phase and amplitude control of the RF carrier, <±1 ns signal sampler synchronization, <1 ns peak-to-peak signal sampler jitter and <1° of peak-to-peak RF-carrier phase jitter. The analyzers

LISTED UNDER: Test & Measurement

Network Analyzers Include Multiport Test Set

September 11, 2008 5:16 am | Keysight Technologies | Product Releases | Comments

Performing vector network analysis from 300 kHz to 20 GHz, Agilent Technologies’ E5071C ENA Series network analyzers use the E5092A multiport test set to evaluate the third harmonics of passive components in WLAN, WiMAX, UWB or

LISTED UNDER: Test & Measurement

Protocol Analyzer Targets USB 3.0 Standard

September 9, 2008 7:48 am | Product Releases | Comments

Using PCI-Express platform circuitry, LeCroy’s Voyager protocol analyzer exerciser system tests devices, systems and software under the USB 3.0 (SuperSpeed USB) standard. The device provides simultaneous protocol

LISTED UNDER: Test & Measurement

Waveform Generators Accelerate Sample Rates

September 8, 2008 7:29 am | Tektronix | Product Releases | Comments

Exhibiting 9.6 GHz effective RF output and 10-bit resolution, Tektronix’s AWG7000B and AWG5000B Series arbitrary waveform generators (AWG) offer sample rates up to 24 GS/s in serial data buses and wideband

LISTED UNDER: Test & Measurement

Generator Offers 10 nS Resolution

September 5, 2008 10:27 am | Product Releases | Comments

Operating on 8 channels of delay and width, Berkeley Nucleonics Corporation’s Model 505 pulse and digital delay generator displays 10 nS edge resolution on all 16 edges. The entry-level device targets users who need multiple

LISTED UNDER: Test & Measurement

PROFIBUS Analyzer Integrates Oscilloscope

August 27, 2008 10:34 am | Product Releases | Comments

Translating PROFIBUS to USB and vice versa, Grid Connect’s ProfiTrace 2 PROFIBUS analyzer incorporates a digital oscilloscope to capture bus signals running at 12 Mbps, display them using the Bit Interpretation Engine, indicate a problem’s distance, and the option to show one device’s signals. The DP-V0/DP-V1 class 1 and 2 master uses the Live List statistics matrix to list all available devices and information including retry messages

LISTED UNDER: Test & Measurement

Analyzer Tests Electro-Optical Components

August 27, 2008 6:24 am | Keysight Technologies | Product Releases | Comments

Having single or dual wavelength options at 1,310 nm or 1,550 nm, Agilent Technologies’ N4374B lightwave component analyzer (LCA) offers traceable electro-optical S-parameter testing for transmitters and receivers in CATV and Radio over Fiber applications. The device exhibits internationally-specified relative and

LISTED UNDER: Test & Measurement

Spectrum Analyzers Yield Low Phase Noise

August 22, 2008 8:13 am | Product Releases | Comments

Measuring the performance of wireless broadband components and devices, Anritsu’s MS271xB Series of microwave spectrum analyzers offer a phase noise of -110 dBC/Hz at 10 kHz offset (800 MHz typical). The devices include a GPIB interface and an option with a suite of measurements to measure the RF of TD-SCDMA signals and

LISTED UNDER: Test & Measurement

Temperature Instruments Exhibit High Accuracy

August 21, 2008 12:06 pm | Product Releases | Comments

Using 8 to 48 separate 24-bit resolution inputs each with its own A/D converter and CJC circuit, Data Translation’s 8-channel TEMPpoint temperature measurement instruments present an accuracy of ±0.01%. The stand-alone boxes offer

LISTED UNDER: Test & Measurement

Timing Platform Integrates PTP and SETS Device

August 14, 2008 7:35 am | Product Releases | Comments

Semtech’s ToPSync (Timing Over Packet Synchronization) ACS9510 device combines IEEE1588v2 precision time protocol (PTP) with the SONET/SDH synchronous equipment timing source (SETS) solution. The device enables IP networks to provide time alignment between base station nodes or network switches and facilitates the move from traditional leased lines to the use of public IP networks to provide the

LISTED UNDER: Test & Measurement


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.