Advertisement

2014 IMPACT Award Winner: Signal Hound wins for Test and Measurement

May 27, 2014 3:35 pm | Product Releases | Comments

The BB60A Real-Time Spectrum Analyzer / RF Recorder from Signal Hound (La Center, WA) is powered and controlled solely over USB 3.0 link and a PC with an Intel Core i7 processor. The BB60A circumvents the traditional need for a processor, display, keyboard, and power supply by using a PC....

LISTED UNDER: RF/Microwave

Compact vibration table designed for testing small components

May 23, 2014 1:29 pm | Product Releases | Comments

Cincinnati Sub-Zero’s (Cincinnati, OH) new TCB-1.3 benchtop vibration table is ideal for reliability testing of compact products and electronics. The dual-purpose system is available in a 16” x 16” (40cm x 40cm) table size and may be used as a stand-alone vibration table for vibration testing....

LISTED UNDER: Environmental

D/A Converter comes in FMC Format at 2.5 GSPS

May 21, 2014 10:25 am | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) offers a Digital-to-Analog Converter (DAC) in the FPGA Mezzanine Card (FMC) format. The high-speed DAC offers 14-bit at 2.5 Giga samples per second. The mezzanine offers 8, 16, 32 or 72 QAM for amplitude modulation.

LISTED UNDER: Computer | Embedded | Boards
Advertisement

BERT offers precision jitter impairment capabilities and low intrinsic jitter levels

May 21, 2014 9:53 am | Tektronix | Product Releases | Comments

Tektronix, Inc. (Beaverton, OR) introduced the BSA286CL BERTScope Bit Error Rate Tester. The BSA286CL is designed for the low intrinsic jitter and precision impairments required for testing a broad set of 100G communications standards including OIF-CEI, CAUI, and InfiniBand Standards.

LISTED UNDER: Digital | Frequency

Socket probe adapter designed to interface with 0.5mm pitch Fine pitch Ball Grid Array packages

April 30, 2014 3:23 pm | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics' (Eagan, MN) PB-BGA133A-Z-01 Socket Probe Adapter which allows high-speed testing of BGA device while accessing the signals using testers via header pins. Features of the PB-BGA133A-Z-01 include shortest possible trace length for maximum speed....

LISTED UNDER: Test

Handheld TDR locates faults on mixed paired metallic cables

April 24, 2014 2:08 pm | Product Releases | Comments

Megger (Norristown, PA) now offers a handheld time domain reflectometer (TDR) that locates faults on mixed paired metallic cables. The CFL535G can test the capabilities of connections and locate faults for up to 12 miles (20 km). This high resolution, compact TDR features dual channel capability and dual aspect display....

LISTED UNDER: Digital

AC/DC Hall effect measurement system includes 7-inch magnet

April 18, 2014 10:52 am | Lake Shore Cryotronics | Product Releases | Comments

The new Model 8407 Hall effect measurement system from Lake Shore Cryotronics (Westerville, OH) features a 7-inch magnet for measuring mobilities at the low end of the DC field measurement range, from 1 to 106 cm2/V s. Like Lake Shore’s existing Model 8404 with 4-inch magnet, it can be ordered with AC field measurement capabilities....

LISTED UNDER: Meters

Measuring machine features accuracy as low as 0.7µm

April 17, 2014 11:00 am | Product Releases | Comments

Mitutoyo America Corporation (Aurora, IL) announces the new STRATO-Apex574 Coordinate Measuring Machine to its STRATO-Apex line of CMMs. This new configuration offers a more compact footprint while still offering the same state-of-the-art blend of high-speed operation....

LISTED UNDER: Probes
Advertisement

Oscilloscopes add enhanced IBIS-AMI, S-parameters modeling support

April 15, 2014 2:26 pm | Tektronix | Product Releases | Comments

Tektronix (Beaverton, OR) extended the capabilities of the analysis system on its MSO/DPO70000 Series of Digital and Mixed Signal Oscilloscopes to include modeling of on-chip silicon behavior using IBIS-AMI models and S-parameters. This

LISTED UNDER: Oscilloscopes

LED solar simulator provides more than one sun of total irradiance

April 11, 2014 11:53 am | Product Releases | Comments

Innovations in Optics, Inc. (Woburn, MA) introduced the Model 2910A-100-SOL high power, multi-wavelength LED illuminator for testing photovoltaic devices that meets Class AAA solar simulator requirements of IEC 60904-9 for spectral match, uniformity of irradiance, and

LISTED UNDER: Electro-Optic

Four-channel portable oscilloscope samples at 5 GS/s

April 10, 2014 3:25 pm | Fluke Corporation | Product Releases | Comments

Fluke Corp. introduced its 190-504 Series II 500 MHz ScopeMeter Portable Oscilloscope, said to be the first to achieve a 500 MHz at 5 GS/s real time sample rate in a four-channel handheld, sealed, and rugged oscilloscope without compromising

LISTED UNDER: Oscilloscopes

Data acquisition system can hold up to 5 modules and up to 320 switch points

April 2, 2014 4:05 pm | Rigol Usa | Product Releases | Comments

Rigol Technologies USA (Oakwood Village, OH) announces their newest product category with the M300 Data Acquisition System, integrating Rigol’s 6.5 digit DMM technology into a robust and versatile system mainframe with modules enabling applications....

LISTED UNDER: Data Loggers

Insulation resistance tester rated at 15 kV

April 1, 2014 4:31 pm | Product Releases | Comments

Megger (Norristown, Pa) now offers a versatile insulation resistance tester (IRT) rated at 15 kV. The MIT1525 measures motors and generators above 34,500 V and equipment rated above 35 kV. Ideal for applications that use cables, transformers, motors/generators, circuit breakers, and bushings....

LISTED UNDER: Resistor

Company introduces the industry's first automated SSL test system

March 27, 2014 3:55 pm | Product Releases | Comments

ASE Test (Greenville, NC) has developed the industry’s first automated test system that is specifically designed for quickly testing the electrical performance of LED drivers, LED arrays, and LED fixtures. Designated the ASE SSL 3.0 Test System, this flexible test system can be used for design....

LISTED UNDER: Electro-Optic

Oscilloscope offers powerful analysis tools at bandwidths from 200 MHz to 1 GHz, powerful analysis tools

March 12, 2014 2:32 pm | Rohde & Schwarz | Product Releases | Comments

The new R&S RTE from Rohde & Schwarz (Munich) is available with bandwidths from 200 MHz to 1 GHz. An acquisition rate of more than one million waveforms per second helps users find signal faults quickly. The scope's accurate digital trigger system with virtually no trigger jitter is

LISTED UNDER: Oscilloscopes

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading