Corelis releases new CD Version 7.7 Boundary-Scan Tool Suite

May 24, 2012 8:44 am | Product Releases | Comments

Corelis announced today the availability of version 7.7 of its ScanExpress Boundary-Scan Tool Suite. This new version covers a wide range of new features and enhancements including improved constraints handling, support for multi-core devices, and new JTAG Embedded Test support for additional Freescale and Texas Instruments processors.

LISTED UNDER: Software | Test & Measurement

Clock oscillator offers ultra-low phase noise

May 22, 2012 11:26 am | Product Releases | Comments

Crystek Corporation’s Ultra-Low Phase Noise CCHD-950 Series HCMOS Clock Oscillator pushes the phase noise performance benchmark with a -168 dBc/Hz noise floor (100 MHz model).

LISTED UNDER: Test & Measurement

Controller kits tap into high-speed PCIe bus

May 19, 2012 12:08 pm | Product Releases | Comments

Two new controller kits for the ScanWorks platform for embedded instruments from ASSET InterTech can, according to the company accelerate test throughput by plugging into the high-speed PCI Express (PCIe) bus in the personal computer where ScanWorks is running.

LISTED UNDER: Boards & Modules | Test & Measurement

High-speed memory test system offers multi-functionality and industry’s top test speed of 8Gbps

May 14, 2012 2:54 pm | Product Releases | Comments

Advantest Corporation today announced the availability of its next-generation high-speed DRAM test system, the T5511. The new system, which begins shipping this month, offers the industry’s fastest test speed of 8Gbps.

LISTED UNDER: Test & Measurement

Tester targets photovoltaic modules and strings

May 14, 2012 9:32 am | Product Releases | Comments

MC Technologies’ PROFITEST-PV allows the measurement of I-U-parameters as well as photovoltaic-modules and strings. A new patented procedure enables the test unit to read peak power, serial resistance, parallel resistance at the same time. All information can

LISTED UNDER: Test & Measurement

2-in-1 insulation tester & multimeter includes wireless datalogging

May 11, 2012 1:23 pm | Product Releases | Comments

Extech Instruments announces the new MG300, a true RMS multimeter with built-in insulation resistance tester and the added safety of wireless datastreaming for remote monitoring and datalogging. By adding insulation testing capabilities to the ubiquitous digital multimeter, electricians are always equipped for insulation testing...

LISTED UNDER: Test & Measurement

Development kit helps build personalized pulse networks

May 8, 2012 9:48 am | Product Releases | Comments

Teseq offers a development kit that allows automotive technicians and engineers to design their own pulse networks.  By using the FLX 5510 in conjunction with Teseq’s NSG 5500, automotive EMC laboratories can design their own pulses as well as

LISTED UNDER: Test & Measurement

GOEPEL electronics improves flexibility of JTAG I/O modules using FPGA embedded instruments

May 3, 2012 9:44 am | Product Releases | Comments

GOEPEL electronics introduced ChipVORX Module, a special FPGA based I/O module product line. The new modules are controlled via a standard TAP enabling access to the entire ChipVORX eco system of test and programming IPs for external instrumentation.

LISTED UNDER: Boards & Modules | Test & Measurement

Strain- and bridge-based USB measurement module is portable

May 1, 2012 12:37 pm | Product Releases | Comments

Data Translation, Inc. announced the release of the DT9838 strain- and bridge-based acquisition module for USB.  The module offers high-speed performance in a compact form factor for applications including strain, load, pressure, and other bridge-based measurements.

LISTED UNDER: Boards & Modules | Test & Measurement

Optical modulation analysis solution boosts vertical resolution to 16 bits

April 30, 2012 3:59 pm | Tektronix | Product Releases | Comments

Tektronix announced that its OM4000 Series Optical Modulation Analyzer can now drive the DSA8300 Digital Sampling Oscilloscope to perform analysis on PM-QPSK, QAM, and other complex-modulation signals with higher vertical resolution than real-time based solutions at lower total system cost.

LISTED UNDER: Test & Measurement

Single-pulse LED measurement system eases binning

April 30, 2012 11:46 am | Product Releases | Comments

Gigahertz-Optik has developed a measurement system for LED binning consisting of the BTS256-LED tester and LPS-20-1500 LED power supply with S-BTS256 software to assist with single pulse LED binning. Both meter, power supply and control software work in tandem to

LISTED UNDER: Optoelectronics & Displays | Test & Measurement

"Connector Saver" with stainless steel coupling nut reduces testing expense

April 25, 2012 9:31 am | Product Releases | Comments

7-16 DIN connectors are large format 50 ohm interfaces designed for high power wireless telecommunications applications such as antennas, base stations, and satellite communications. Test ports are subject to minimal wear each time the connector interface is coupled and de-coupled. Contact pins and dielectrics can be damaged if connectors are misaligned during coupling.

LISTED UNDER: Packaging & Interconnects | Test & Measurement

XJTAG releases second generation PXI boundary scan solution

April 20, 2012 1:47 pm | Product Releases | Comments

  XJTAG today released its second generation PXI boundary scan solution – a high speed interface that allows the integration of XJTAG boundary scan with PXI-based test systems. The PXI XJLink2 enables users of PXI chassis, such as NI LabVIEW and LabWindows, to leverage the benefits of XJTAG's XJLink2 boundary scan controller from within their integrated PXI test platform.  

LISTED UNDER: Software | Test & Measurement

Magnetic rotary encoder IC offers reliable measurements in noisy industrial environments

April 18, 2012 11:36 am | Product Releases | Comments

austriamicrosystems released the AS5048, a 14-bit magnetic encoder IC offering new features which make it easier than ever to achieve accurate, reliable angle measurements in microcontroller-based applications. The AS5048, which provides a PWM output and either an SPI or I2C interface...

LISTED UNDER: ICs | Test & Measurement

T3 Innovation launches new Tel-Scope Telecomm Test Set

April 12, 2012 1:48 pm | Product Releases | Comments

T3 Innovation ( has announced the launch of the new TLA300 Tel-Scope Telecomm Test Set. Scheduled to ship in May with an MSRP of $269.95, the Tel-Scope delivers more line condition and status information than any other telephone line tester in the world.

LISTED UNDER: Test & Measurement


You may login with either your assigned username or your e-mail address.
The password field is case sensitive.