Advertisement

Boundary-scan controller supports PXIe/Compact PCI-express slot format

August 21, 2012 12:12 pm | Product Releases | Comments

JTAG Technologies announces a further extension to its line of high-performance boundary-scan IEEE Std. 1149.1 controllers. Known as the DataBlaster JT 37x7/PXIe the new unit offers support for the increasingly popular PXIe/Compact PCI-express slot format that now features in some of the latest Automatic Test Equipment based on the PXI(e) standards.

LISTED UNDER: Test & Measurement

Relays ideal for test and measurement, medical applications

August 20, 2012 2:28 pm | Product Releases | Comments

Standex-Meder Electronics announces its CRF series of instrumentation grade reed relays. CRF Series relays are the smallest in the industry, at only 3.4 mm high, and come equipped with an internal

LISTED UNDER: Sensors & Actuators | Test & Measurement

Test interface adapters improve power supply, noise, EMI, and PDN testing accuracy

August 20, 2012 12:34 pm | Tektronix | Product Releases | Comments

Picotest.com has released three new Signal Injectors, adding to its already industry leading lineup of test adapters. The three new Signal Injectors include the J2180A 0.1Hz -100MHz Ultra Low Noise Preamplifier (now with CE Approval), the J2102A Common Mode Transformer (PDN, ground loop), the J2112A High Current Output (1A) Current Injector and the J2190A 0.1Hz-10Hz Active Filter.

LISTED UNDER: Test & Measurement
Advertisement

Test instruments offer cost-effective, non-intrusive way to increase test coverage

August 9, 2012 10:42 am | Product Releases | Comments

ASSET InterTech has added two new memory test instruments to its ScanWorks embedded instrumentation library for its FPGA-controlled test (FCT) circuit board test tool, giving electronics manufacturers a cost-effective non-intrusive means of increasing test coverag

LISTED UNDER: Test & Measurement

Automated test software will help reduce time to market

August 6, 2012 9:03 am | Tektronix | Product Releases | Comments

Tektronix, Inc. announced automated test software for Serial Attached SCSI (SAS) physical-layer transmitter conformance testing that now includes measurement support for SAS-3 12 Gbps interfaces. Using DPO/DSA/MSO70000 Series  oscilloscopes with real time sampling rates up to 100 GS/s on two channels at 33 GHz bandwidth along with DPOJET-based automated conformance test software engineers can gain deep insights into critical SAS-3 design challenges.

LISTED UNDER: Test & Measurement

DC power supplies feature high-density, high efficiency

August 1, 2012 3:59 pm | TDK-Lambda Americas, Inc. | Product Releases | Comments

TDK Corporation announced the availability of TDK-Lambda Z+ Series of programmable DC power supplies. These high-density, high efficiency, 2U format, bench-top and rack mountable power supplies are designed to meet the demands of a wide variety of ATE, Laboratory and OEM applications, including: Test & Measurement, Semiconductor Burn-in, Component Test, LED/Laser Test, RF Amplifiers, Electromagnetic and Electrochemical applications.

LISTED UNDER: Test & Measurement

AMETEK ships 1 MVA AC+DC grid simulation system to NREL

July 31, 2012 9:02 am | Product Releases | Comments

AMETEK Programmable Power (www.programmablepower.com) recently shipped  a regenerative 1 MVA AC + DC source system to the Energy Systems Integration Facility (ESIF) on the campus of the U.S. Department of Energy’s National Renewable Energy Laboratory (NREL) in Golden, Colorado. The system, which is to be used for grid simulation in the test and evaluation of advanced energy systems...

LISTED UNDER: Test & Measurement

Telecomm test set intended for harsh environments

July 23, 2012 12:54 pm | Product Releases | Comments

T3 Innovation (t3innovation.com) has announced the new TLA300 Tel-Scope Telecomm Test Set is now shipping. With an MSRP of $269.95, the Tel-Scope delivers more line condition and status information than any other telephone line tester in the world. The new TLA300 Tel-Scope Telecommunications test set comes with a slate of features not found on any other ‘butt’ set in the world.

LISTED UNDER: Test & Measurement
Advertisement

Magnetic field coil features multi-turn configuration for generating fields up to 1200 A/m

July 6, 2012 3:25 pm | Product Releases | Comments

Teseq has introduced a new magnetic field coil that generates fields up to 1200 A/m during magnetic field testing.

LISTED UNDER: Test & Measurement

Oscilloscope firmware designed to simplify, shorten debug cycles

July 3, 2012 2:27 pm | Tektronix | Product Releases | Comments

Tektronix, Inc announced a broad set of oscilloscope firmware and software upgrades designed to simplify and shorten serial bus debug cycles and enhanced support for a number of important serial bus standards including PCI Express, CAN/LIN, FlexRay, MIL-STD-1553B and MOST (Media Oriented System Transport).

LISTED UNDER: Test & Measurement

Synchronizer accommodates up to 8 PCIe boards for multichannel applications

June 26, 2012 2:56 pm | Product Releases | Comments

Pentek, Inc. introduced a system synchronization and distribution amplifier, the Model 7893 PCIe board.

LISTED UNDER: Boards & Modules | Test & Measurement

Dielectric cure monitoring solutions provide insight about thermoset materials

June 26, 2012 10:06 am | Product Releases | Comments

Lambient Technologies LLC announced instruments, sensors and software for monitoring the dielectric properties of curing polymers.  These properties provide insight into the chemistry, formulation, reaction rate, viscosity and cure state of epoxies, polystyrenes, polyurethanes, silicones, SMC, BMC and

LISTED UNDER: Packaging & Interconnects | Sensors & Actuators | Test & Measurement

JTAG module addresses analogue testing

June 20, 2012 12:34 pm | Product Releases | Comments

JTAG Technologies has introduced the JT 2149/DAF, a compact, mixed-signal (Digital/Analogue/Frequency) measurement module. The JT 2149/DAF is the first unit of its type to offer both digital and analogue test access to PCBs via JTAG Technologies’ widely-used QuadPod signal conditioning interface.

LISTED UNDER: Boards & Modules | Test & Measurement

USB sensor features compact size for field applications

June 19, 2012 3:07 pm | Keysight Technologies | Product Releases | Comments

Agilent Technologies Inc. today announced the Agilent U2020 X-series. These compact, high-performance USB sensors allow engineers to test devices quickly and accurately.

LISTED UNDER: Sensors & Actuators | Test & Measurement

Coaxial switch has guaranteed 5 million cycle operating life

June 19, 2012 9:56 am | Keysight Technologies | Product Releases | Comments

Agilent Technologies Inc. announced a USB-powered, single-pole double-throw coaxial switch, operating from DC to 18 GHz. The first-to-market microwave switch driven by a USB port, the Agilent U1810B will provide system-design and manufacturing engineers a long-operating-life solution with convenient RF switching.

LISTED UNDER: Test & Measurement

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading