Advertisement
Test

Handheld TDR locates faults on mixed paired metallic cables

April 24, 2014 2:08 pm | Product Releases | Comments

Megger (Norristown, PA) now offers a handheld time domain reflectometer (TDR) that locates faults on mixed paired metallic cables. The CFL535G can test the capabilities of connections and locate faults for up to 12 miles (20 km). This high resolution, compact TDR features dual channel capability and dual aspect display....

LISTED UNDER: Digital
Advertisement

LED solar simulator provides more than one sun of total irradiance

April 11, 2014 11:53 am | Product Releases | Comments

Innovations in Optics, Inc. (Woburn, MA) introduced the Model 2910A-100-SOL high power, multi-wavelength LED illuminator for testing photovoltaic devices that meets Class AAA solar simulator requirements of IEC 60904-9 for spectral match, uniformity of irradiance, and

LISTED UNDER: Electro-Optic

Insulation resistance tester rated at 15 kV

April 1, 2014 4:31 pm | Product Releases | Comments

Megger (Norristown, Pa) now offers a versatile insulation resistance tester (IRT) rated at 15 kV. The MIT1525 measures motors and generators above 34,500 V and equipment rated above 35 kV. Ideal for applications that use cables, transformers, motors/generators, circuit breakers, and bushings....

LISTED UNDER: Resistor

Company introduces the industry's first automated SSL test system

March 27, 2014 3:55 pm | Product Releases | Comments

ASE Test (Greenville, NC) has developed the industry’s first automated test system that is specifically designed for quickly testing the electrical performance of LED drivers, LED arrays, and LED fixtures. Designated the ASE SSL 3.0 Test System, this flexible test system can be used for design....

LISTED UNDER: Electro-Optic

‘Battery fuel gauge’ integrated circuits reduce measurement errors to below ± 2.8 percent

March 4, 2014 12:35 pm | On Semiconductor | Product Releases | Comments

ON Semiconductor (Phoenix, AZ) has introduced a new family of complementary metal-oxide semiconductor (CMOS) ‘battery fuel gauge’ integrated circuits that provide accurate measurements of the remaining power level of one-cell lithium-ion (Li+) batteries commonly used in a wide range of portable electronics....

LISTED UNDER: Battery | IC

Digital meter offers a bright, 4-digit LED display with 16-bit resolution

January 24, 2014 9:53 am | Product Releases | Comments

H. G. Schaevitz LLC, Alliance Sensors Group has expanded its line of sensor support electronics with the release of the M-100 Series Single Channel Digital Process Meter. The M-100 Digital Meter is designed for measurement applications that require displaying an analog sensor’s high level output, or the output of most types of thermocouples.

LISTED UNDER: Digital

RF surge protection tester ideal for field use

January 20, 2014 10:00 am | Product Releases | Comments

Times Microwave Systems introduces the new and unique Times-Protect LP-SPT RF surge protection tester to its growing line of innovative surge protection products. The LP-SPT provides the user with the capability to test any lightning protection device or component to ensure its proper functioning....

LISTED UNDER: Digital

Liquid crystal thermography system reveals PCB and component temperatures

January 8, 2014 10:07 am | Advanced Thermal Solutions | Product Releases | Comments

The new ethermVIEW liquid crystal thermographic analysis system provides optical temperature measurements of active PCBs and components. The system uses the color response of thermochromic liquid crystals (TLC) for non-invasive thermal studies. Developed

LISTED UNDER: Electro-Optic | IR Temperature

Battery-operated TTR tester allows users to perform tests in less than five seconds

November 20, 2013 9:29 am | Product Releases | Comments

Megger now offers a rugged, handheld, battery-operated TTR tester (transformer turns ratio). The TTR20, a complement to the world-renowned hand-cranked TTR, measures turns ratio, polarity and excitation current in single-phase and three-phase transformers, current and potential transformers as well as voltage regulators.

LISTED UNDER: Battery

Spectrum Analyzers offer wide 802.11ac signal acquisition bandwidth, fast real-time features

November 19, 2013 2:42 pm | Tektronix | Product Releases | Comments

Tektronix, Inc. announced that its real-time spectrum analyzers (RTSAs) offer up to 165 MHz acquisition bandwidth, asserted to be the widest available in this price range. This bandwidth supports demanding applications such as high-margin, high accuracy WLAN 802.11ac characterization and troubleshooting

LISTED UNDER: Signal Generator

High-accuracy torque testers designed for tool performance verifications

November 19, 2013 1:12 pm | Product Releases | Comments

Mark-10 Corporation has announced its Series TT02 torque tool testers for the accurate and reliable verification of applied torque values derived from torque screwdrivers, wrenches, and other small hand tools used on the factory floor and in other production environments.

LISTED UNDER: Torque

Analog adhesion tester uses compressed inert gas to apply a continuous tensile load to an aluminum pull-stub

October 29, 2013 12:23 pm | Product Releases | Comments

The P.A.T.T.I.-K Analog Adhesion Tester uses compressed inert gas to apply a continuous tensile load to an aluminum pull-stub which is bonded to the test surface with an adhesive. After the adhesive has cured, the operator attaches the piston. Then the operator pushes and holds the “RUN” button.

LISTED UNDER: Mechanical

Precision digital micrometer offers a cantilever balance system

October 15, 2013 2:04 pm | Product Releases | Comments

The new model 49-56 precision digital micrometer combines a modern contemporary look with a robust mechanical design and new improved electronics, including a digital linear encoder. The system features a comprehensive software program for controlling test speed....

LISTED UNDER: Digital Multimeter

Battery-operated proving unit ensures safe 2-pole tester operation

October 4, 2013 11:07 am | Product Releases | Comments

Megger now offers a palm-sized, battery-operated proving unit that provides a substitute voltage source for testing a two-pole tester.  The MPU690 helps to ensure that a voltage tester is capable of detecting voltage safely and efficiently.

LISTED UNDER: Safety

Test set designed for legacy aircraft employing smart weapons

September 26, 2013 4:49 pm | Geotest - Marvin Test Systems, Inc. | Product Releases | Comments

Marvin Test Solutions (formerly known as Geotest-Marvin Test Systems) is bridging the critical test gap that exists in 4th generation aircraft with its MTS-3060 SmartCan, a universal O-level aircraft armament test set for legacy aircraft employing smart weapons.

LISTED UNDER: Digital Multimeter

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading