Advertisement
Test

CableEye® M3U Cable Tester System: Item 821U

March 3, 2015 5:00 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Schematic Capture | Data Acquisition | Data Loggers

Light Director™ Guided Assembly System: A CableEye® Accessory

March 3, 2015 4:56 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Schematic Capture | Test Instrumentation | Data Loggers

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 3, 2015 4:48 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Data Loggers | Meters | Probes
Advertisement

Spectrometer system perfect for chemical processing plants

February 27, 2015 12:29 pm | by KROHNE, Inc. | Product Releases | Comments

KROHNE, Inc. announces its new SpectroBAY process near-infrared (NIR) spectrometer system for efficient process control in the chemical industry. Improving chemical plant reliability and profitability through automated control, the SpectroBAY system is ideal for a range of applications....

LISTED UNDER: Light | Meters | IR Temperature

Modular electronic loads feature current ratings of 60 A

February 12, 2015 1:33 pm | by Intepro Systems | Intepro Systems | Product Releases | Comments

INTEPRO Systems announces the introduction of its new line of 1800 W modular electronic loads. The ML1800 Series features an 8-inch TFT LCD color display with multiple language selection that is visible from across the room. The 6-slot chassis can be specified with up to six 300 W or three 600 W modules....

LISTED UNDER: Electrical

Control software offers high gains in speed and productivity

February 2, 2015 3:36 pm | by Cascade Microtech | Cascade Microtech | Product Releases | Comments

Cascade Microtech has evolved its probe station user environment to an unprecedented level of power and efficiency with the latest release of Velox. The company has consolidated its Nucleus and ProberBench system software packages into a universal ...

LISTED UNDER: Test Instrumentation | High Frequency | RF/Microwave

Logic analyzers feature digital sampling rate up to 500 MS/s

January 23, 2015 8:17 am | by Saleae LLC | Product Releases | Comments

Saleae LLC (San Francisco, CA) introduces a new line of logic analyzers — Logic 4, 8, Pro 8, and Pro 16. Logic features analog (sampling rate of up to 50 MS/s) and digital (sampling rate of up to 500 MS/s) compatibility, monitoring for up to 16 channels, multiple-platform ...

LISTED UNDER: Data Loggers | Logic Analysis

Signaling tester provides multi-operator support

January 20, 2015 2:00 pm | by Anritsu Company | Anritsu Company | Product Releases | Comments

Anritsu Company (Morgan Hill, CA) announces that its MD8475A signaling tester with SmartStudio Manager Windows-based control software now provides multi-operator support for Commercial Mobile Alert System (CMAS) Carrier Acceptance Test (CAT) packages....

LISTED UNDER: Signal Generator
Advertisement

Test socket achieves 31 gram actuation force per ball

December 18, 2014 11:10 am | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics (Eagan, MN) recently introduced a new Stamped spring pin socket addressing high performance requirements for testing BGA243 - CBT-BGA-7020. The contactor is a stamped spring pin with 31 gram actuation force per ball and ...

LISTED UNDER: Test & Measurement | Test

Test platform serves up to 512 125 MHz digital I/O channels

December 2, 2014 4:50 pm | Geotest - Marvin Test Systems, Inc. | Product Releases | Comments

Marvin Test Solutions (Irvine, CA) announced the TS-960, the newest version of its successful TS-900 PXI semiconductor test platform. The TS-960 brings the performance and features of high-end systems to customers at a fraction of the footprint....

LISTED UNDER: Test & Measurement | Test

Starter kit delivers affordable access to JTAG test and debug

November 18, 2014 2:27 pm | Corelis Inc. | Product Releases | Comments

Corelis, Inc. (Cerritos, CA) introduced the availability of its JTAG Starter Kit, a new value-oriented bundle for those looking to get started quickly and painlessly with JTAG test and debug. This new bundle combines the advanced capabilities of ...

LISTED UNDER: Test & Measurement | Test

PCIe digitizer cards offer 5 GS/s sample rate

September 26, 2014 10:21 am | Product Releases | Comments

Spectrum has extended the performance of its PCIe based instruments by adding nine new models to its M4i series of digitizers. These cards boast real-time sampling rates up to 5 GS/s and high bandwidth making it possible for them to measure signals, edges and pulses down into …

LISTED UNDER: Test & Measurement | Digital

Logic analyzers include sample depths up to a billion

September 22, 2014 11:59 am | Product Releases | Comments

Newcomb Company Inc. (Huntsville, AL) introduces its latest GoLogicXL 36 and 72 channel logic analyzers with GHz sampling rates, sample depths up to a billion samples, and advanced triggering capabilities. At only 100mm x 145mm x 42mm and 608g ...

LISTED UNDER: Test & Measurement | Test | Logic Analysis

Arbitrary waveform generator offers complex modulated signals up to 32 GBaud and beyond

September 10, 2014 5:06 pm | Keysight Technologies | Product Releases | Comments

Keysight Technologies, Inc. (Santa Rosa, CA) added a 65-GSa/s, 20-GHz modular instrument to its portfolio of arbitrary waveform generators. The new high-speed, wide-bandwidth M8195A arbitrary waveform generator allows engineers ...

LISTED UNDER: Test & Measurement | Test | Signal Generator

Battery analyzers simplify the testing of mission critical battery backup systems

September 2, 2014 1:21 pm | Fluke Corporation | Product Releases | Comments

The new 500 Series Battery Analyzers from Fluke (Everett, WA) simplify the workflow of testing stationary batteries and battery banks through an intuitive user interface that provides quick, guided test setups ensuring technicians are capturing the correct data....

LISTED UNDER: Test & Measurement | Test | Battery

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading