Advertisement
Test

8.5 GHz auto calibration unit ideal for manufacturing and test facilities

April 14, 2015 1:48 pm | by Anritsu Company | Anritsu Company | Product Releases | Comments

Anritsu Company introduces the MN25208A SmartCal two-port 8.5 GHz auto calibration unit for its ShockLine family of vector network analyzers (VNAs). A plug-and-play calibration unit, SmartCal automatically powers on via a USB connection and loads calibration coefficients from on-board memory, for faster ...

LISTED UNDER: Electrical

IC scanner and micro near field probes up to 60 µm resolution

April 14, 2015 1:06 pm | by Langer EMV-Technik GmbH | Product Releases | Comments

The ICS 105 IC scanner can be used together with the ICR near-field microprobes to measure high-frequency near fields above integrated circuits (ICS 105 GND set) and small modules (ICS 105 UH set). The analysis of an IC's near fields provides a better understanding of what happens inside the IC at high frequencies. The measurements ...

LISTED UNDER: Probes | Frequency | IC

Vector signal generators ideal for applications in product design, testing, and manufacturing

March 31, 2015 9:16 am | by Newark | Newark | Product Releases | Comments

The TSG4100A series of vector signal generators (VSG) from Tektronix is ideal for applications in product design, testing and manufacturing. The TSG4100 combines an RF signal generator and a vector signal generator (VSC) to meet increasing demands for more affordable test solutions in ...

LISTED UNDER: Signal Generator
Advertisement

Vector Network Analyzers offer sweeps at 100 microseconds per point

March 26, 2015 8:41 am | by Anritsu Company | Anritsu Company | Product Releases | Comments

Anritsu Company introduces the ShockLine MS46121A series of 1-port USB Vector Network Analyzers (VNAs) that bring the price, performance, and ease-of-use advantages of Anritsu’s patented ShockLine VNA technology to an extremely compact package. Two models with frequency coverage ...

LISTED UNDER: Digital

Test kit measures cable length and generates tone levels

March 10, 2015 4:01 pm | by Platinum Tools | Platinum Tools | Product Releases | Comments

Platinum Tools is proud to announce that it will debut the Net Prowler Pro Test Kit during 2015 ISC West, held in Las Vegas, Nev. from April 15-17 at the Sands Expo and Convention Center, booth #5036. The Net Prowler Pro Test Kit (P/NTNP850K1) is now shipping with an MSRP of $999.95. A tester-only kit ...

LISTED UNDER: Signal Generator

Magnetic field source generates EFT/burst fields

March 10, 2015 1:51 pm | by Langer EMV-Technik GmbH | Product Releases | Comments

The BS 06DB-s magnetic field source is used to generate magnetic EFT/burst fields. An EFT/burst generator (IEC 61000-4-4) supplies the field source with an EFT/burst current via an HV cable. The field source generates high magnetic fields (approx. 200 mT) in very small spaces (2.54 mm²). It is thus ideal ...

LISTED UNDER: Probes | IC | RFI/EMI

CableEye® M3U Cable Tester System: Item 821U

March 3, 2015 5:00 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Schematic Capture | Data Acquisition | Data Loggers

Light Director™ Guided Assembly System: A CableEye® Accessory

March 3, 2015 4:56 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Schematic Capture | Test Instrumentation | Data Loggers
Advertisement

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 3, 2015 4:48 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10V to 1500V DC, or 10V to 1000V RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Data Loggers | Meters | Probes

Spectrometer system perfect for chemical processing plants

February 27, 2015 12:29 pm | by KROHNE, Inc. | Product Releases | Comments

KROHNE, Inc. announces its new SpectroBAY process near-infrared (NIR) spectrometer system for efficient process control in the chemical industry. Improving chemical plant reliability and profitability through automated control, the SpectroBAY system is ideal for a range of applications....

LISTED UNDER: Light | Meters | IR Temperature

Modular electronic loads feature current ratings of 60 A

February 12, 2015 1:33 pm | by Intepro Systems | Intepro Systems | Product Releases | Comments

INTEPRO Systems announces the introduction of its new line of 1800 W modular electronic loads. The ML1800 Series features an 8-inch TFT LCD color display with multiple language selection that is visible from across the room. The 6-slot chassis can be specified with up to six 300 W or three 600 W modules....

LISTED UNDER: Electrical

Control software offers high gains in speed and productivity

February 2, 2015 3:36 pm | by Cascade Microtech | Cascade Microtech | Product Releases | Comments

Cascade Microtech has evolved its probe station user environment to an unprecedented level of power and efficiency with the latest release of Velox. The company has consolidated its Nucleus and ProberBench system software packages into a universal ...

LISTED UNDER: Test Instrumentation | High Frequency | RF/Microwave

Logic analyzers feature digital sampling rate up to 500 MS/s

January 23, 2015 8:17 am | by Saleae LLC | Product Releases | Comments

Saleae LLC (San Francisco, CA) introduces a new line of logic analyzers — Logic 4, 8, Pro 8, and Pro 16. Logic features analog (sampling rate of up to 50 MS/s) and digital (sampling rate of up to 500 MS/s) compatibility, monitoring for up to 16 channels, multiple-platform ...

LISTED UNDER: Data Loggers | Logic Analysis

Signaling tester provides multi-operator support

January 20, 2015 2:00 pm | by Anritsu Company | Anritsu Company | Product Releases | Comments

Anritsu Company (Morgan Hill, CA) announces that its MD8475A signaling tester with SmartStudio Manager Windows-based control software now provides multi-operator support for Commercial Mobile Alert System (CMAS) Carrier Acceptance Test (CAT) packages....

LISTED UNDER: Signal Generator

Test socket achieves 31 gram actuation force per ball

December 18, 2014 11:10 am | Ironwood Electronics, Inc. | Product Releases | Comments

Ironwood Electronics (Eagan, MN) recently introduced a new Stamped spring pin socket addressing high performance requirements for testing BGA243 - CBT-BGA-7020. The contactor is a stamped spring pin with 31 gram actuation force per ball and ...

LISTED UNDER: Test & Measurement | Test

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading