Advertisement
Test

Touch-screen digital oscilloscope includes 7.6MSa record length

July 28, 2014 4:20 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company Inc. (Fairport, NY) announces the Owon TDS7102 — a new, 100MHz four-channel benchtop scope, with touch-screen capabilities that make instrument setting, operation, and adjustment faster and more intuitive. With 1GSa/s signal capturing on all four channels simultaneously ...

LISTED UNDER: Test & Measurement | Oscilloscopes | Digital
Advertisement

Test solution designed for characterizing USB 3.1 receivers

July 14, 2014 3:29 pm | Agilent Technologies | Product Releases | Comments

Agilent Technologies (Santa Clara, CA) announced an accurate test solution for characterizing USB 3.1 receivers. Using the Agilent USB 3.1 receiver test set, design and test engineers in the semiconductor and computer industry can now accurately characterize and verify USB 3.1 receiver ports in ASICs and chipsets....

LISTED UNDER: Test & Measurement | Test

Multi-channel PXI-based test solution speeds LTE/LTE-Advanced waveform creation and analysis

July 1, 2014 10:34 am | Agilent Technologies | Product Releases | Comments

Agilent Technologies Inc. (Santa Clara, CA) announced the LTE/LTE-Advanced multi-channel PXI-based test solution, which is positioned to accelerate the setup of multi-channel test system configurations and enables engineers to gain deeper insight into complex carrier aggregation and…

LISTED UNDER: Test

Programmable DC power supply line adds two 360-W and two 720-W models

June 30, 2014 10:00 am | Keithley Instruments | Product Releases | Comments

Keithley Instruments, Inc. (Cleveland, OH) announced the new Series 2260B Programmable DC Power Supplies, which include two 360-W and two 720-W models. The Series 2260B family, which complements the recently introduced Series 2200 family of single- and multi-channel power supplies, is designed for…

LISTED UNDER: Current Meters

JSB215 USB 2 Amp Relay Module

June 18, 2014 1:49 pm | J-Works, Inc. | Products

USB control 2 amp relay module supports both AC and DC signals. Easy to use software API allows control 8 or 16 relays. Support for various operating systems.

LISTED UNDER: Data Acquisition | Microcomputer | Industrial

JSB210B USB Relay Module

June 18, 2014 1:45 pm | J-Works, Inc. | Products

USB controlled 1 Amp 8 or 16 single pole double throw relay module. Software examples for various windows programs, linux and other operating systems

LISTED UNDER: Data Acquisition | Industrial | Boards

600-V DC load module tests LED drivers

June 7, 2014 3:04 pm | Chroma Systems Solutions, Inc. | Product Releases | Comments

Chroma Systems Solutions, Inc. (Foothill Ranch, CA) announced the release of its 63115A LED Simulating DC Electronic Load. This new 10-A/600-V/300-W module is an addition to the company’s line of LED simulating 63110A/13A electronic loads....

LISTED UNDER: Electrical | Electro-Optic

Liquid cooled electronic load series enables advanced load testing

May 29, 2014 10:04 am | Schaefer Power Inc | Product Releases | Comments

Schaefer Inc. (Hopkinton, MA) unveiled the Second Generation of the LW 5100 Series of liquid cooled electronic loads featuring user friendly touch screen panel and enhanced functionality. These built-to-project loads are housed in a compact case that provides...

LISTED UNDER: Battery | Current Meters

2014 IMPACT Award Winner: Agilent Technologies wins for Boards and Modules

May 28, 2014 12:51 pm | Agilent Technologies | Product Releases | Comments

The Agilent U5303A PCIe 12-bit High-Speed Digitizer with on-board signal processing is a compact dual-channel PCIe Digitizer, sampling up to 3.2 GS/s. It delivers unprecedented analog fidelity, high effective number of bits, and very low noise, according to Agilent....

LISTED UNDER: Signal Generator

Compact vibration table designed for testing small components

May 23, 2014 1:29 pm | Product Releases | Comments

Cincinnati Sub-Zero’s (Cincinnati, OH) new TCB-1.3 benchtop vibration table is ideal for reliability testing of compact products and electronics. The dual-purpose system is available in a 16” x 16” (40cm x 40cm) table size and may be used as a stand-alone vibration table for vibration testing....

LISTED UNDER: Environmental

BERT offers precision jitter impairment capabilities and low intrinsic jitter levels

May 21, 2014 9:53 am | Tektronix | Product Releases | Comments

Tektronix, Inc. (Beaverton, OR) introduced the BSA286CL BERTScope Bit Error Rate Tester. The BSA286CL is designed for the low intrinsic jitter and precision impairments required for testing a broad set of 100G communications standards including OIF-CEI, CAUI, and InfiniBand Standards.

LISTED UNDER: Digital | Frequency

Handheld TDR locates faults on mixed paired metallic cables

April 24, 2014 2:08 pm | Product Releases | Comments

Megger (Norristown, PA) now offers a handheld time domain reflectometer (TDR) that locates faults on mixed paired metallic cables. The CFL535G can test the capabilities of connections and locate faults for up to 12 miles (20 km). This high resolution, compact TDR features dual channel capability and dual aspect display....

LISTED UNDER: Digital

LED solar simulator provides more than one sun of total irradiance

April 11, 2014 11:53 am | Product Releases | Comments

Innovations in Optics, Inc. (Woburn, MA) introduced the Model 2910A-100-SOL high power, multi-wavelength LED illuminator for testing photovoltaic devices that meets Class AAA solar simulator requirements of IEC 60904-9 for spectral match, uniformity of irradiance, and

LISTED UNDER: Electro-Optic

Insulation resistance tester rated at 15 kV

April 1, 2014 4:31 pm | Product Releases | Comments

Megger (Norristown, Pa) now offers a versatile insulation resistance tester (IRT) rated at 15 kV. The MIT1525 measures motors and generators above 34,500 V and equipment rated above 35 kV. Ideal for applications that use cables, transformers, motors/generators, circuit breakers, and bushings....

LISTED UNDER: Resistor

Company introduces the industry's first automated SSL test system

March 27, 2014 3:55 pm | Product Releases | Comments

ASE Test (Greenville, NC) has developed the industry’s first automated test system that is specifically designed for quickly testing the electrical performance of LED drivers, LED arrays, and LED fixtures. Designated the ASE SSL 3.0 Test System, this flexible test system can be used for design....

LISTED UNDER: Electro-Optic

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading