Advertisement
Data Acquisition

Controllers offer unparalleled J1939/NMEA2000 connectivity

April 16, 2015 11:46 am | by Divelbiss Corporation | Divelbiss Corporation | Product Releases | Comments

Divelbiss Corporation announces significant upgrades to their P-Series PLC on a Chip based controllers integrating enhanced J1939 / NMEA2000 connectivity options and SD Card data logging. By supporting user configurable messaging, users will now have the freedom to fully implement these communication buses....

LISTED UNDER: Microcomputer | Computer | Electromechanical

CSB1470 USB controlled Digital Input Output (DIO) Module

March 16, 2015 4:52 pm | J-Works, Inc. | Products

USB controlled DIO modules that support multiple voltage levels. 24 or 48 digital IO channels support interface voltage levels of 1.8V, 2.5V, 3.3V and 5V. Each channel can be configured as digital input or output.

LISTED UNDER: Computer | Data Acquisition | Embedded

CableEye® M3U Cable Tester System: Item 821U

March 3, 2015 5:00 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Schematic Capture | Data Acquisition | Data Loggers
Advertisement

Light Director™ Guided Assembly System: A CableEye® Accessory

March 3, 2015 4:56 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Schematic Capture | Test Instrumentation | Data Loggers

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

March 3, 2015 4:48 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10V to 1500V DC, or 10V to 1000V RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Data Loggers | Meters | Probes

Logic analyzers feature digital sampling rate up to 500 MS/s

January 23, 2015 8:17 am | by Saleae LLC | Product Releases | Comments

Saleae LLC (San Francisco, CA) introduces a new line of logic analyzers — Logic 4, 8, Pro 8, and Pro 16. Logic features analog (sampling rate of up to 50 MS/s) and digital (sampling rate of up to 500 MS/s) compatibility, monitoring for up to 16 channels, multiple-platform ...

LISTED UNDER: Data Loggers | Logic Analysis

Digital data logger enables large bursts of data up to 20bits at 100 MHz

November 4, 2014 4:19 pm | Saelig Company, Inc. | Product Releases | Comments

Saelig Company, Inc. (Fairport, NY) has introduced LOG Storm 2MS, a new economical high-speed digital data logger for troubleshooting digital system buses. LOG Storm 2MS contains an 8Mbyte/2Msample memory buffer, enabling large bursts of data....

LISTED UNDER: Test & Measurement | Data Acquisition | Data Loggers

Data acquisition system improves operational efficiency

November 3, 2014 11:51 am | Yokogawa | Product Releases | Comments

Yokogawa Electric Corporation (Sugar Land, TX) announces the development of the SMARTDAC+ GM data acquisition system, and will be releasing it to the market on November 17. The SMARTDAC+ GM data acquisition system improves operational efficiency....

LISTED UNDER: Test & Measurement | Data Acquisition | Boards
Advertisement

Data loggers features wireless two-way communication with pulse input

July 14, 2014 10:30 am | Omega Engineering | Product Releases | Comments

Omega’s (Stamford, CT) new series of wireless pulse data loggers features wireless two-way communication with pulse input for monitoring wind speed, energy or flow rate. The data logger has a digital display that shows data in real time, a battery life indicator and audible and LED alarm indicators.

LISTED UNDER: Data Loggers

Plug Load Logger provides accurate equipment energy use data

June 30, 2014 10:40 am | Onset Computer Corp. | Product Releases | Comments

Onset (Bourne, MA) has announced the HOBO Plug Load Logger, an easy-to-deploy data logger that measures and records the power and energy consumption of 120-V plug loads from office equipment, vending machines, and other devices. The HOBO Plug Load Logger provides…

LISTED UNDER: Data Loggers

PCIe-IDIO-24 Isolated Digital I/O Card

June 19, 2014 3:34 pm | ACCES I/O Products, Inc. | Products

ACCES I/O Products, Inc., is pleased to announce a new addition to its PCI Express family of I/O cards—Model PCIe-IDIO-24. Designed for high-voltage protection in industrial control and monitoring applications, this product features 24 optically isolated digital inputs and 24 solid state FET relay outputs. The card is an x1 PCI Express device which can be used in any available PCI Express slot. Optocouplers on the card are rated for 2,500V isolation and help protect systems in industrial environments against high voltages or currents caused by line surges or ground loops. The solid state outputs are capable of switching from 5-34DC at 2A continuous.

LISTED UNDER: Computer | Data Acquisition | Embedded

JSB210B USB Relay Module

June 18, 2014 1:45 pm | J-Works, Inc. | Products

USB controlled 1 Amp 8 or 16 single pole double throw relay module. Software examples for various windows programs, linux and other operating systems

LISTED UNDER: Data Acquisition | Industrial | Boards

D/A Converter comes in FMC Format at 2.5 GSPS

May 21, 2014 10:25 am | Vadatech, Inc. | Product Releases | Comments

VadaTech (Henderson, NV) offers a Digital-to-Analog Converter (DAC) in the FPGA Mezzanine Card (FMC) format. The high-speed DAC offers 14-bit at 2.5 Giga samples per second. The mezzanine offers 8, 16, 32 or 72 QAM for amplitude modulation.

LISTED UNDER: Computer | Embedded | Boards

Data acquisition system can hold up to 5 modules and up to 320 switch points

April 2, 2014 4:05 pm | Rigol Usa | Product Releases | Comments

Rigol Technologies USA (Oakwood Village, OH) announces their newest product category with the M300 Data Acquisition System, integrating Rigol’s 6.5 digit DMM technology into a robust and versatile system mainframe with modules enabling applications....

LISTED UNDER: Data Loggers

DSB3232 USB 32 channel Digital IO with mutiple voltage support.

March 4, 2014 1:23 pm | J-Works, Inc. | Products

The DSB3232 USB digital IO lines can be configured for input or output at the bit level supporting various logic family voltages. Those voltages included 1.8V, 2.5V 3.3V and 5V. Technicians wire the digital IO module using the on-board screw terminals. With the expanding number of logic level interface voltages, one of the challenges facing connecting devices to the USB bus is matching the required voltage levels and the DSB3232 meets those requirements.

LISTED UNDER: Computer | Microcomputer | Embedded

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading