Advertisement
Safety

Fiber Optic Emergency Stop Switch

May 29, 2014 9:22 pm | Micronor, Inc. | Products

The MR380-2 Series Emergency Stop Switch paired with the MR380-1 Series Controller provides an innovative emergency signaling scheme that can be deployed in hazardous environments and over very long distances. The Fiber Optic E‑Stop switch employs a photo interrupt scheme operating over a duplex multimode 62.5/125 μm optical link that allows for reliable signal detection and implements a known default failure state. The optical signal levels are rated inherently safe Ex op is, allowing the system to be safely deployed in any type of explosive atmosphere. The entire fiber optic system has a generous system loss budget, allowing for long distance, complex routing and daisy chaining of multiple switches.

LISTED UNDER: Fiberoptic | Push Button | Safety
Advertisement

General-purpose relay conforms to FCC part 68

January 23, 2014 10:22 am | Cit Relay & Switch | Product Releases | Comments

CIT Relay & Switch offers the J104D Series general purpose relay. With bifurcated contacts, this relay is highly sensitive and low cost. The J104D conforms to FCC part 68 and is UL approved. Specifications: Contact arrangement is 2C DPDT with contact rating of 2A@ 24VDC and 1A@120VAC.

LISTED UNDER: Safety

Ultra-miniature slide switches feature a mechanical operating life of 10K cycles

October 31, 2013 4:35 pm | C&K Components | Product Releases | Comments

C&K Components has expanded its family of low-profile, cost-effective miniature slide switches. Designed for applications with significant board space and height restrictions, the PCM Series is available in SPDT and SP3T models. The PCM Series has been extensively designed into computer & computer peripheral products....

LISTED UNDER: Safety

Pressure Sensitive Safety and Sensing Mats

July 9, 2013 10:41 am | Tapeswitch Corporation | Products

Tapeswitch Corporation manufactures standard and custom model pressure sensitive safety and sensing mats in many sizes, constructions, and large area mat systems. Different models offer different characteristics fitting to your specific safety or sensing application. Standard safety models include ControlmatTM (abrasion resistant), ArmormatTM (impact resistant), SafetyZone (parallel plated and molded), Diamond plate (heavy load capable). Safety interface controllers available up to a CAT 3 level safety performance. Sensing mats include CVP Sensing mats. Custom manufactured to size/area coverage, length, standard technology type, and some models available with custom graphics/text such as Caution.

LISTED UNDER: Current | Foot | Programmable

Safety Laser Scanner

July 9, 2013 10:34 am | Tapeswitch Corporation | Products

Tapeswitch Corporation/Sentek Solutions offers the compact, safety laser scanner, (UAM-02LP-T302) for collision prevent./presence detect./intrusion detect. Offering a wide area detection zone (190°), max protection range of 2 meters, max warning range of 10 meters. Status indicators (7 segment display). Only 3 13/16”H x 3 9/16”W x 3 15/16”L. IP65 rated. Single protection zone (16 pattern combination/2 warning zones (non-safety) storage capability). The software offers a beginner mode, flexible configuration protection zone, warning zone, muting configuration capability, reference boundary feature, direct, numerical, and auto setting drawing method options, and complex shaped zone set-up. Category 3 SIL2 PLd Type 3 safety level performance.

LISTED UNDER: Optical | Safety | Solid State

Anti-vandal switch offers both dot and ring illumination options

March 11, 2013 1:47 pm | E-Switch | Product Releases | Comments

E-Switch announces new features for the popular PV6 anti-vandal switch. This tamper-resistant switch is used in many applications, including those accessible to the public, and those requiring a sleek design. It offers both dot and ring illumination options and is rated to IP65 standards.

LISTED UNDER: Safety

Non-contact Safety Switches and Multi-gate Monitoring Systems

January 4, 2013 9:14 am | Tapeswitch Corporation | Products

Tapeswitch Corporation offers complete lines of non-contact interlock switches and multi-gate monitoring systems for machine guarding in SSS switches (standalone electronic switches), F - Series (coded electronic switches with up to 500000 unique codes), Magnasafe (magnetic switches), and ISIS Series Safety Switches (coded magnetic switches and systems). The New HE Series interlock switch system is a multi-gate monitoring system The new line features the HE Series Interlock switches which are the latest coded magnetic non-contact switches. They feature fully encapsulated solid state, single point switching with built in, dual color, LED status indication. The switches offer a CAT 4, SIL 3 PLe safety performance level. It has 2 N/O and 1 N/C bi-directional solid state outputs. The solid state outputs offer simple series connection. They offer a 7mm switching distance and can approach on each other from most angles. The HE Series is IP67 rated. When combined with the SCU-1 control unit, it is a multi-gate switch solution capable of monitoring up to 30 switches in the series. Since the HE series is a HED double switch, it reduces the amount of wiring for multiple gates and reduces the brackets needed for mounting the switches.

LISTED UNDER: Safety

Safety Edges

January 4, 2013 9:07 am | Tapeswitch Corporation | Products

Tapeswitch Corporation manufactures complete lines of safety edge machine guards. They manufacture to profile, actuation force, continuous length (to contour of machine), contoured, size, types of directional activation (front and side), and multiple configured edge assemblies.

LISTED UNDER: Safety
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading