Advertisement

Software generates motion programs directly from your CAD drawing

November 30, 2012 4:46 pm | Aerotech, Inc. | Product Releases | Comments

CADFusion bridges the gap between part drawings and motion control. Users need only import a vector-based DXF drawing into this easy-to-use environment to see the resulting tool path graphically on CADFusion’s canvas. Part optimization is easy and intuitive with shape re-ordering, feature scaling, and rotational/translational features at your fingertips.

LISTED UNDER: Software | Designing | Graphing

Digital power software tool enables flexibility to optimize energy consumption

November 7, 2012 3:32 pm | Ericsson Power Modules | Product Releases | Comments

Ericsson has unveiled an advanced industry-first toolkit that provides board-power designers with highly advanced software to configure, implement and monitor power conversion devices — from a single unit to a complete system — including the Ericsson 3E* digital Point-Of-Load (POL) regulators....

LISTED UNDER: Software

Free tool allows remote debugging behind a firewall

October 24, 2012 11:11 am | Product Releases | Comments

Remote Debugging via the SEGGER J-Link is now possible over the internet even if the target sits behind a firewall. With the introduction of SEGGER's J-Link Tunnel Mode, it is now possible to quickly access a J-Link connected to a PC on a remote network. Software development of a product can be done in multiple locations...

LISTED UNDER: Software
Advertisement

Graphical audio development tool designed for SHARC processors

October 24, 2012 10:11 am | Analog Devices, Inc. | Product Releases | Comments

Analog Devices introduced the SigmaStudio for SHARC graphical development tool for audio applications. Based on ADI’s award-winning SigmaStudio for SigmaDSP digital signal processor tool, the SigmaStudio for SHARC tool is a programming, development and real-time tuning software environment...

LISTED UNDER: Software

Software includes enhanced 3D graphing using OpenGL

October 22, 2012 12:10 pm | Product Releases | Comments

OriginLab announced the release of Origin and OriginPro version 9. The new version provides a set of features and enhancements that were developed based on customer feedback and industry demand. Origin and OriginPro are used by more than 150,000 customers worldwide...

LISTED UNDER: Software

Configurable CAD models designed for DC brush motors

October 15, 2012 4:44 pm | Product Releases | Comments

PITTMAN Motors has introduced configurable DC motor 3D model downloads. The 3D model system is an online system through the PITTMAN website (www.Pittman-Motors.com) that allows an engineer to fully configure a DC brush motor with a wide variety of optional components such as planetary and spur gearboxes, brakes, and encoders.

LISTED UNDER: Software

Software integrates process management infrastructure, expertise, and ecosystem support

October 9, 2012 2:56 pm | Product Releases | Comments

Yokogawa Electric Corporation announces FAST/TOOLS R9.05, the latest release of their web-based real-time management and visualization software. The FAST/TOOLS SCADA suite delivers a comprehensive solution that brings together their process management infrastructure, expertise, and ecosystem support for greater efficiency and improved operational agility.

LISTED UNDER: Software

Software-based programmable automation controller ideal for computationally intensive applications

October 1, 2012 3:14 pm | Product Releases | Comments

Industrial automation manufacturer Opto 22 has announced SoftPAC(tm), a software-based programmable automation controller (PAC) ideal for use with computationally intensive applications as well as applications that must log, manipulate, and exchange large amounts of data. SoftPAC joins Opto 22's existing

LISTED UNDER: Software
Advertisement

Software helps developers with driver assistance systems

September 20, 2012 2:13 pm | Product Releases | Comments

SPACE Automotive Simulation Models (ASM) now work with PreScan, a software program from TASS for high-quality sensor and environment simulation. This tool combination enables developers to optimize the efficiency of intelligent assistance systems at an early stage with highly precise sensor simulation and flexible, reproducible traffic simulation.

LISTED UNDER: Software

Discovery kit features built-in MEMS sensors

September 12, 2012 10:14 am | Stmicroelectronics | Product Releases | Comments

STMicroelectronics  has released an innovative easy-access development platform for projects based on its new high-performance STM32 F3 microcontrollers, which are now starting to enter volume production. The new development platform, the STM32 F3 Discovery Kit, features built-in MEMS sensors—gyroscope and e-compass(1)—with 9 degrees of freedom (DOF) (2)...

LISTED UNDER: Software

Software provides in-air cursor control on 8-bit microprocessors for the smart TV market

August 28, 2012 3:14 pm | Hillcrest Labs | Product Releases | Comments

Hillcrest Labs unveiled a new addition to its award-winning Freespace MotionEngine software family: Freespace MotionEngine Lite. MotionEngine Lite provides high performance, in-air cursor control on 8-bit processors commonly found on remote controls, with lower costs and simpler integration than typical Smart TV motion control implementations.

LISTED UNDER: Sensors & Actuators | Software

App calculates semi-conductor power losses

August 27, 2012 4:50 pm | Product Releases | Comments

Easily calculate the semiconductor power losses of your 3-phase inverter. Created for the Android, the new PowerSim app from Powerex can be used to calculate power losses and temperature rises of Powerex power semiconductors in 2-level, 3-phase inverters, based on operating conditions provided by the user.

LISTED UNDER: Software

Data Translation announces VIBpoint framework V3.0 for complete vibration testing solution

August 14, 2012 12:59 pm | Product Releases | Comments

Data Translation today announced the release of the VIBpoint Framework V3.0. The new version of the software provides tools to output stimuli with waveform generation. The VIBpoint Framework application, combined with DT dynamic signal acquisition (DAQ) devices, provides a complete vibration testing solution.

LISTED UNDER: Software

Comprehensive HMI Systems and Components for Industrial Machines

July 19, 2012 3:37 pm | Product Releases | Comments

EAO Corporation offers custom designed and produced HMI Systems and Components for use in modern industrial machinery.  With over sixty plus years of international award-winning recognition, EAO is able to propose and integrate both intuitive and innovative HMI Systems and Components to meet the specific needs and challenges often found within these hazardous environments.   Market knowledge, experience, and specialization is applied to rigorous applications ranging from single purpose machines such as bending, cutting, forming, and extruding to more complex systems that can require intelligent communication systems.

LISTED UNDER: Software

NanoCalc systems useful for demanding applications

July 16, 2012 11:36 am | Product Releases | Comments

Ocean Optics’ NanoCalc systems utilize spectroscopic reflectometry to accurately determine optical thin film thicknesses for consumer, semiconductor, medical and industrial applications. Customer-designed and new application-ready preconfigured NanoCalc models make it easy to select the optimum system for deep UV to NIR wavelength measurement needs.

LISTED UNDER: Software

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading