Advertisement
Engineering

CableEye® M3U Cable Tester System: Item 821U

March 3, 2015 5:00 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing — Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 ◊ Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. ◊ If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Schematic Capture | Data Acquisition | Data Loggers

Light Director™ Guided Assembly System: A CableEye® Accessory

March 3, 2015 4:56 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero ◊ The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Schematic Capture | Test Instrumentation | Data Loggers

Control software offers high gains in speed and productivity

February 2, 2015 3:36 pm | by Cascade Microtech | Cascade Microtech | Product Releases | Comments

Cascade Microtech has evolved its probe station user environment to an unprecedented level of power and efficiency with the latest release of Velox. The company has consolidated its Nucleus and ProberBench system software packages into a universal ...

LISTED UNDER: Test Instrumentation | High Frequency | RF/Microwave
Advertisement

Software boasts a next-generation UI

January 28, 2015 8:32 am | by Omnify Software | Product Releases | Comments

Omnify Software announced the immediate availability of its next-generation Empower PLM product, version 6.0. This product release highlights Omnify’s commitment to their customers, boasting a new User Interface (UI), customer communication portal ...

LISTED UNDER: Data Analysis

Software allows for better management of design and production

January 8, 2015 3:08 pm | Altium | Product Releases | Comments

INLYNK announced the release of version 4.3 of its flagship product. Optymo is a BOM and Parts Management solution that helps organizations to better manage their design and production steps. The new version is the result of a collaboration between Altium, Octopart and INLYNK.

LISTED UNDER: Software | Designing | Engineering

Simulation software designed for engineering, manufacturing applications

October 24, 2014 2:08 pm | Comsol Inc. | Product Releases | Comments

COMSOL, Inc (Burlington, MA) announced the pre-release of COMSOL Multiphysics® software version 5.0. Version 5.0 features extensive product updates, three new add-on products, and the Application Builder. With the Application Builder, the power of COMSOL Multiphysics is now accessible to everyone through the use of applications.

LISTED UNDER: Software | Engineering

Instrumentation and analysis tools offer safety-critical expertise and full verification for multicore platforms

April 3, 2014 12:36 pm | Product Releases | Comments

LDRA (Wirral, UK) announced its ability to provide verification of multicore systems to safety-critical standards. The need for greater processing power with reduced power consumption is driving the developers of safety-critical applications toward

LISTED UNDER: Embedded Systems

Software development kit increases application and device performance

February 27, 2014 8:28 am | Product Releases | Comments

Digia (Nuremberg) has released a major update to Qt Enterprise Embedded, the fully-integrated solution that enables users to get started immediately with software development for an embedded device with a tailored user experience. The Qt Enterprise Embedded update introduces several new value-add features....

LISTED UNDER: Embedded Systems
Advertisement

JSB470 USB 24 Channel Parallel Digital IO Module

February 7, 2014 3:20 pm | J-Works, Inc. | Products

JSB470 series of digital input and output modules controlled over the USB. Engineers control the channel direction and values from any host computer. Each digital IO line is 5V tolerant and provides a minimum 2.5V output at 15ma, and sink 24ma. A technician wires the digital IO module to their hardware via a standard 25 pin sub "D" connector. The user communicates with the module from any programming or test language that supports USB communications as shown in provided sample applications. Perfect for a variety of control, monitor and test & measurement applications

LISTED UNDER: Data Acquisition | Industrial | Instrument Control

C compiler supports Power Architecture

January 3, 2014 1:42 pm | Altium | Product Releases | Comments

Altium Limited announced a new major release of its TASKING C compiler solution for automotive application development, supporting the Power Architecture-based microcontrollers from the Freescale Qorivva/5xxx Series and STMicroelectronics SPC5 Series. The new compiler brings

LISTED UNDER: Embedded Systems

Software coupling aims to streamline simulation process

November 18, 2013 11:59 am | Product Releases | Comments

Motor Design Limited (MDL) has partnered with CD-adapco to create a link between MDL’s Motor-CAD and CD-adapco’s STAR-CCM+ software.  The collaboration aims to improve the accuracy of a fast analytical approach while simplifying the modeling process of the CFD computation. This will

LISTED UNDER: Graphing | Instrument Control

Software helps build machine-to-machine applications

October 8, 2013 12:39 pm | Wind River Systems | Product Releases | Comments

Wind River introduced the latest version of Wind River Intelligent Device Platform, a complete software development environment used for building machine-to-machine (M2M) applications and devices that communicate with the cloud. The platform provides ready-to-use components to secure, manage, and connect Internet of Things (IoT) gateways.

LISTED UNDER: Embedded Systems

Software includes expanded electro-acoustic capability

October 4, 2013 12:29 pm | Audio Precision | Product Releases | Comments

Audio Precision announced a new software release that expands the features of the electro-acoustic test suite for APx audio analyzers. APx v3.4 adds Thiele/Small parameters, Complex Impedance and Loudspeaker Production Test to the APx platform.

LISTED UNDER: Test Instrumentation

Point tool automates test generation and unit test management

September 24, 2013 9:35 am | Ldra Technology, Inc | Product Releases | Comments

LDRA introduces LDRAunit, an integrated framework for automating the generation and management of unit tests. By separating unit testing capabilities from the rest of the LDRA tool suite, LDRA delivers a focused test management tool that addresses a need for software unit test without requiring investment in a complete tool chain.

LISTED UNDER: Test Instrumentation

Test solution covers transmitter, receiver, dongle, and cable testing

July 22, 2013 12:50 pm | Tektronix | Product Releases | Comments

Tektronix announced availability of the industry’s only one-box solution for physical and protocol compliance testing for the latest Mobile High-Definition Link (MHL) Compliance Test Specification (CTS) 2.1 covering transmitter (Tx), receiver (Rx), dongle and cable testing for both physical (PHY) and protocol layers.

LISTED UNDER: Test Instrumentation

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading